4.7 Article

Integrated hierarchical macrostructures of flexible basalt fiber composites with tunable electromagnetic interference (EMI) shielding and rapid electrothermal response

Related references

Note: Only part of the references are listed.
Article Materials Science, Composites

Highly stretchable graphene/polydimethylsiloxane composite lattices with tailored structure for strain-tolerant EMI shielding performance

Zhenyu Wang et al.

Summary: The study presents a highly stretchable and conductive graphene/polydimethylsiloxane lattice fabricated through 3D printing technique, with excellent stretchability, tunable EMI shielding effectiveness, and durability for next-generation flexible and stretchable electronics.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Engineering, Environmental

Engineering MXene surface with POSS for reducing fire hazards of polystyrene with enhanced thermal stability

Bin Yu et al.

Summary: A facile strategy was reported for surface manipulation of Ti3C2Tx with AP-POSS, resulting in POSS-Ti3C2Tx that showed significantly improved thermal and flame retardant properties when incorporated into PS nanocomposites. The outstanding fire safety was attributed to the combination of adsorption, catalytic and barrier effects of POSS-Ti3C2Tx, making it attractive for wide potential applications.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Nanoscience & Nanotechnology

High-Performance Laminated Fabric with Enhanced Photothermal Conversion and Joule Heating Effect for Personal Thermal Management

Zhiguang Guo et al.

Summary: Inspired by the thermal management of polar bears, a multifunctional wearable heater with enhanced photothermal conversion, mid-infrared reflection, thermal insulation, and electrical heating performance was developed. It can quickly reach high temperatures and provide good insulation, showing potential for energy-saving personal thermal management fabrics.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Highly conductive and scalable Ti3C2Tx-coated fabrics for efficient electromagnetic interference shielding

Simge Uzun et al.

Summary: This study developed highly conductive fabrics for electromagnetic interference (EMI) shielding by dip-coating conventional cotton and linen fabrics in Ti3C2Tx MXene dyes, showing significant EMI shielding effectiveness compared to commercial metal-based conductive fabrics. The EMI shielding effectiveness of the fabrics increased with the number of dip-coating cycles and remained stable even after two years of storage under ambient conditions.

CARBON (2021)

Article Engineering, Multidisciplinary

Flexible and thin multifunctional waterborne polyurethane/Ag film for high-efficiency electromagnetic interference shielding, electro-thermal and strain sensing performances

Yunpeng Jia et al.

Summary: The study presents a simple and feasible method to fabricate conductive polymer composite films supported on Ag flakes and waterborne polyurethane by spraying. The films exhibit excellent flexibility and electromagnetic interference shielding effectiveness, remarkable electro-thermal effect, high durability, reproducibility, rapid response time to strain, and potential applications in human movement monitoring and wearable electronic devices.

COMPOSITES PART B-ENGINEERING (2021)

Article Engineering, Multidisciplinary

Constructing 3D carbon-metal hybrid conductive network in polymer for ultra-efficient electromagnetic interference shielding

Hongji Duan et al.

Summary: This study adopts an effective strategy to construct a perfect 3D carbon-metal hybrid conductive network in a PA6 matrix, producing composite materials with ultra-efficient EMI shielding performance, offering new possibilities for developing high-performance and affordable EMI shielding composites for next-generation communication applications.

COMPOSITES PART B-ENGINEERING (2021)

Article Materials Science, Composites

Simultaneously improved mechanical and electromagnetic interference shielding properties of carbon fiber fabrics/epoxy composites via interface engineering

Shu Zhu et al.

Summary: By using electroless plating and dopamine self-polymerization, the electrical conductivity and strength of carbon fiber reinforced composites were successfully improved, enhancing the interactions between fibers and epoxy matrix. The introduction of dopamine altered the fracture mechanisms of the composites, leading to an enhancement in EMI shielding effectiveness.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Article Chemistry, Physical

Multi-reflection-enhanced electromagnetic interference shielding performance of conductive nanocomposite coatings on fabrics

Chuntao Lan et al.

Summary: In this study, the modulation of coating structure was systematically studied to investigate its effects on the electromagnetic shielding performance. It was found that increasing the amount of interfaces in the coating can significantly enhance the shielding effectiveness of the coated fabric. The presence of more GO/PPy interfaces in the coating leads to a stronger electromagnetic shielding enhancement, providing guidance for the rational design of high-performance EMI shielding materials.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Polymer Science

Effect of Plasma Treatment on the Impact Behavior of Epoxy/Basalt Fiber-Reinforced Composites: A Preliminary Study

Maria Rosaria Ricciardi et al.

Summary: This paper investigates the effect of one-step sulfur hexafluoride (SF6) plasma treatment on the low velocity impact behavior of basalt/epoxy composites, finding that treating with SF6 plasma increases the hydrophobicity and impact resistance of the composites. Plasma-treated basalt systems showed damage in a confined area and higher impact resistance compared to untreated systems.

POLYMERS (2021)

Article Chemistry, Multidisciplinary

Bioinspired, Highly Adhesive, Nanostructured Polymeric Coatings for Superhydrophobic Fire-Extinguishing Thermal Insulation Foam

Zhewen Ma et al.

Summary: This study presents a biomimetic strategy to design a polymeric coating with strong adhesion and flame-retardant properties, which can self-extinguish during vertical burning and release low heat and smoke, outperforming previous products.

ACS NANO (2021)

Article Polymer Science

A novel DOPO-based flame retardant containing benzimidazolone structure with high charring ability towards low flammability and smoke epoxy resins

Hao Wang et al.

Summary: A novel flame retardant POBDBI was synthesized and applied to epoxy resin, demonstrating significantly improved flame retardant performance and thermal stability of the composite materials. Fire behavior and characteristics of the char residue were also studied, showing the potential of POBDBI in enhancing flame retardancy.

POLYMER DEGRADATION AND STABILITY (2021)

Article Nanoscience & Nanotechnology

Axial Alignment of Carbon Nanotubes on Fibers To Enable Highly Conductive Fabrics for Electromagnetic Interference Shielding

Chuntao Lan et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Physical

Multilayer structured PANI/MXene/CF fabric for electromagnetic interference shielding constructed by layer-by-layer strategy

Guang Yin et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2020)

Article Engineering, Multidisciplinary

Multifunctional MXene/natural rubber composite films with exceptional flexibility and durability

Wei Yang et al.

COMPOSITES PART B-ENGINEERING (2020)

Article Engineering, Manufacturing

Applying TPU blends and composite carbon fibers to flexible electromagnetic-shielding fabrics: Long-fiber-reinforced thermoplastics technique

Mei-Chen Lin et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Review Engineering, Environmental

2D MXenes: Electromagnetic property for microwave absorption and electromagnetic interference shielding

Mao-Sheng Cao et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Chemistry, Physical

Click electroless plating of nickel nanoparticles on polyester fabric: Electrical conductivity, magnetic and EMI shielding properties

Bahareh Moazzenchi et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

Article Materials Science, Paper & Wood

Study of electrothermal properties of silver nanowire/polydopamine/cotton-based nanocomposites

Zhiliang Chen et al.

CELLULOSE (2019)

Article Engineering, Environmental

Eco-friendly flame retardant and electromagnetic interference shielding cotton fabrics with multi-layered coatings

Yan Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Polymer Science

Synthesis of a novel phosphorus-nitrogen flame retardant and its application in epoxy resin

Zong-Min Zhu et al.

POLYMER DEGRADATION AND STABILITY (2019)

Article Nanoscience & Nanotechnology

Robustly Superhydrophobic Conductive Textile for Efficient Electromagnetic Interference Shielding

Li-Chuan Jia et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Engineering, Environmental

Hydro-sensitive sandwich structures for self-tunable smart electromagnetic shielding

Yana Wang et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Chemistry, Multidisciplinary

Self-Assembly Core-Shell Graphene-Bridged Hollow MXenes Spheres 3D Foam with Ultrahigh Specific EM Absorption Performance

Xinliang Li et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Article Engineering, Manufacturing

Hierarchical structures of CNT@basalt fabric for tribological and electrical applications: Impact of growth temperature and time during synthesis

Garima Mittal et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Review Chemistry, Multidisciplinary

Electronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes)

Kanit Hantanasirisakul et al.

ADVANCED MATERIALS (2018)

Article Engineering, Manufacturing

Dual modification of graphene by polymeric flame retardant and Ni (OH)2 nanosheets for improving flame retardancy of polypropylene

Bihe Yuan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)

Review Chemistry, Multidisciplinary

Fiber-Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications

Wei Zeng et al.

ADVANCED MATERIALS (2014)