Journal
COMPOSITES PART B-ENGINEERING
Volume 225, Issue -, Pages -Publisher
ELSEVIER SCI LTD
DOI: 10.1016/j.compositesb.2021.109257
Keywords
Frequency response; Smart materials; Electrical properties; Analytical modeling; Mechanical testing
Funding
- Texas Department ofTransportation (TxDOT) [0-6905-1]
- Department of Energy [DE-FE-0032092]
- Beyond Bits Technology
- University of Houston Center for Carbon Management in Energy program
Ask authors/readers for more resources
Nanomaterial additives are widely used in cement and concrete-based sensors for stress and strain measurement in structures. This study focuses on the impedance responses of enhanced CNFAs at different frequencies for real-time structural health monitoring. Results show that the impedance measurements of CNFAs at different frequencies provide an extra dimension for characterization of different phenomena and multimodal measurements simultaneously.
ABSTR A C T Nanomaterial additives have been broadly used in cement and concrete-based sensors to measure the stress and strain in the structure. Most of the studies focused on measuring the resistivity of sensors with Direct Current (DC) or relatively low-frequency. In this work, the impedance responses of enhanced Carbon Nano-Fiber Ag-gregates (CNFAs) at different frequencies are rigorously studied and utilized as a tool for real-time structural health monitoring (SHM). The CNFA impedance measurements at different measurement frequencies provide an extra dimension (frequency dimension) to allow the characterization of different phenomena and multimodal measurements simultaneously. First, a comprehensive physical model is established to understand the frequency responses of the CNFA impedance. Second, COMSOL Multiphysics is used to simulate the frequency responses of the CNFA impedance, which provides more insights into the electric field and current density distribution. The impedance of CNFAs decreased with the increased dosage of carbon nanofibers (CNFs). Third, experimental studies are reported in detail. The electrical impedance variation (EZV) of the CNFA in parallel orientation is 151% higher than that of perpendicular orientation at the frequency of 2612 Hz and uniaxial compression stress of 4.65 MPa. The strain-EZV curve obtained from the response spectrum is linear for frequencies ranging from 98 Hz to 463.9 kHz. The strain-EZV curve for 5625 Hz has a linear fit with the gauge factor of 147.78. At 1000 Hz, the CNFA exhibited a repeatable behavior up to 9.35 MPa and detection limit up to the stress of 18.62 MPa.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available