☆ 4.7 Article

Bond performance of tensile lap-spliced basalt-FRP reinforcement in high-strength concrete beams

COMPOSITE STRUCTURES (2022)

Related references

Note: Only part of the references are listed.

Article Mechanics

Bond behaviour of recycled aggregate concrete with basalt fibre-reinforced polymer bars

Zhe Xiong et al.

Summary: This study investigated the bond performance of recycled aggregate concrete structures reinforced with fibre-reinforced polymer bars, highlighting the effective corrosion prevention and the key factors influencing bond performance. The findings provide valuable insights for improving the application and design potential of such structures.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Durability characteristics of high and ultra-high performance concretes

Muazzam Ghous Sohail et al.

Summary: This paper evaluates the durability characteristics of HPC and UHPC compared to NSC, finding that they have dense microstructures, high electrical resistance, negligible chloride permeability, low sorptivity, and resistance to carbonation. With at least three orders of magnitude lower chloride diffusion coefficient in UHPC compared to NSC, these materials are expected to have a longer service life in reinforced concrete structures, especially in harsh-climatic conditions. The study provides valuable data and analysis that could promote the adoption of HPC and UHPC in practice.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Experimental study on the effects of glass fibres and expansive agent on the bond behaviour of glass/basalt FRP bars in seawater sea-sand concrete

Z. Xiong et al.

Summary: The research investigated the effects of adding glass fibres and expansive agent on the bond behaviour of FRP bars in SSSC, revealing an increase in bond stiffness but only marginal improvement in bond strength.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Experimental study on fatigue bond behaviour between basalt fibre-reinforced polymer bars and recycled aggregate concrete

Rui Zou et al.

Summary: This study systematically investigated the fatigue bond behaviour between basalt fibre-reinforced polymer (BFRP) bars and recycled aggregate concrete (RAC), and revealed the effects of design parameters on bond performance.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Engineering, Civil

Development Length of Small-Diameter Basalt FRP Bars in Normal- and High-Strength Concrete

Decebal Michaud et al.

Summary: This study determined the development lengths of different diameter BFRP deformed bars through a series of tests, revealing that as concrete strength increased, the development length decreased, while the average bond strength increased. The current design guidelines significantly overestimated the development lengths of small-diameter bars, and alternative equations were proposed for more accurate predictions.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2021)

Add to Collection

Article Mechanics

Bond durability and service life prediction of BFRP bars to steel FRC under aggressive environmental conditions

Alaa Taha et al.

Summary: This study experimentally investigated the bond durability of BFRP bars in plain and SFRC under simulated oceanic environment and elevated temperatures, finding that specimens with higher fiber volume fraction showed better performance at high temperatures. The CMR model exhibited better correlation with experimental data than the BPE model. Predictions for a 50-year service life indicated bond strength retentions of BFRP bars ranging from 54% to 86%, depending on factors such as concrete type, temperature, and moisture level.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Structural performance and moment redistribution of basalt FRC continuous beams reinforced with basalt FRP bars

Abdelrahman Abushanab et al.

Summary: Increasing the volume fractions (Vf) of basalt macro fibers (BMF) and the sagging-to-hogging reinforcement ratio, and decreasing stirrups spacing significantly improved the ductility index, load-carrying capacities, and moment redistribution of BFRC-RC beams. Additionally, increasing the reinforcement ratio and Vf of BMF was more effective in improving the moment redistribution than reducing the stirrups spacing. Modifying the equations based on ACI 440.1R-15 provisions and a model suggested by Rjoub provided the most accurate predictions of the tested beams' moment capacities.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Shear behavior of basalt FRC beams reinforced with basalt FRP bars and glass FRP stirrups: Experimental and analytical investigations

Abathar Al-Hamrani et al.

Summary: The study found that the shear capacity of the beams increased with the addition of basalt macro-fibers and higher reinforcement ratios. Beams reinforced with GFRP stirrups showed significant reductions in ultimate strengths and stiffnesses compared to those with steel stirrups. The predicted shear design capacities of BFRP-BFRC reinforced concrete beams using existing models and code equations showed good correlation with experimental results.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Engineering, Civil

Flexural Behavior of Basalt Fiber-Reinforced Concrete Slab Strips with BFRP Bars: Experimental Testing and Numerical Simulation

Karim Attia et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2020)

Add to Collection

Article Mechanics

Bond durability of basalt FRP bars to fiber reinforced concrete in a saline environment

Alaa Taha et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Mechanics

Flexural behavior of basalt fiber-reinforced concrete slab strips reinforced with BFRP and GFRP bars

Karim Attia et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Bond performance between fibre-reinforced polymer bars and concrete under pull-out tests

Wei Wei et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Engineering, Civil

Bond between glass fibre reinforced polymer bars and high - strength concrete

Najia Saleh et al.

STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Experimental study on the bond behavior of GFRP bars in normal and self-consolidating concrete

Nabila Zemour et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Engineering, Civil

Experimental Study of Circular High-Strength Concrete Columns Reinforced with GFRP Bars and Spirals under Concentric and Eccentric Loading

Abdeldayem Hadhood et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2017)

Add to Collection

Article Engineering, Multidisciplinary

Bond durability of basalt-fiber-reinforced-polymer (BFRP) bars embedded in concrete in aggressive environments

Mohamed Hassan et al.

COMPOSITES PART B-ENGINEERING (2016)

Add to Collection

Article Engineering, Civil

Bond Properties of Sand-Coated GFRP Bars with Fly Ash-Based Geopolymer Concrete

Biruk Hailu Tekle et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2016)

Add to Collection

Article Engineering, Civil

Bond Performance of Basalt Fiber-Reinforced Polymer Bars to Concrete

Ahmed El Refai et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

Add to Collection

Article Engineering, Civil

Bond Durability of Basalt Fiber-Reinforced Polymer Bars Embedded in Concrete under Direct Pullout Conditions

Ahmed El Refai et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

Add to Collection

Article Construction & Building Technology

Bond Strength of Standard and High-Modulus GFRP Bars in High-Strength Concrete

K. M. A. Hossain et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2014)

Add to Collection

Article Materials Science, Composites

Behavior of concrete beams reinforced with GFRP BARS

V. G. Kalpana et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)

Add to Collection

Article Engineering, Multidisciplinary

Experimental study of bond behaviour between concrete and FRP bars using a pull-out test

Marta Baena et al.

COMPOSITES PART B-ENGINEERING (2009)

Add to Collection

Article Construction & Building Technology

Bond strength of glass fiber reinforced polymer ribbed rebars in normal strength concrete

Qingduo Hao et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Add to Collection

Article Construction & Building Technology

Effect of FRP bar degradation on interface bond with high strength concrete

Julio F. Davalos et al.

CEMENT & CONCRETE COMPOSITES (2008)

Add to Collection

Editorial Material Engineering, Civil

Discussion of Bond behavior of fiber reinforced polymer bars under direct pullout conditions by Zenon Achillides and Kypros Pilakoutas

HZ Wang

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2005)

Add to Collection

Article Engineering, Civil

Bond behavior of fiber reinforced polymer bars under direct pullout conditions

Z Achillides et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2004)

Add to Collection

Article Engineering, Multidisciplinary

Development length of FRP straight rebars

E Cosenza et al.

COMPOSITES PART B-ENGINEERING (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.