4.7 Article

Temperature effect on impact response of flax/epoxy laminates: Analytical, numerical and experimental results

Related references

Note: Only part of the references are listed.
Article Engineering, Manufacturing

Experimental assessment of low velocity impact damage in flax fabrics reinforced biocomposites by coupled high-speed imaging and DIC analysis

Karthik Ram Ramakrishnan et al.

Summary: This study investigates the impact behavior of flax fabrics-epoxy and commingled flax-polypropylene composite plates, using low velocity impact tests and high-speed imaging coupled with DIC analysis. A crack-tracking algorithm is implemented to identify crack initiation and propagation, while force-displacement histories and high-speed camera results are compared to identify different modes of damage and critical energy for complete penetration. This method can effectively depict the events leading to the breakage of biocomposites and be a valuable tool for investigating the impact behavior of other materials.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Mechanics

Influence of reinforcement architecture on static and dynamic mechanical properties of flax/epoxy composites for structural applications

Furkan Ahmad et al.

Summary: The study explored the impact of different weave structures on the mechanical properties and failure mechanisms of flax fiber reinforced epoxy composites. It was found that factors such as the number of load-sharing fibers in the fabric and the interlacing points significantly affected the tensile strength and modulus of the composites. Additionally, weave parameters such as reinforcement architecture were also found to influence the impact strength and modulus of the developed composites.

COMPOSITE STRUCTURES (2021)

Article Materials Science, Composites

Influence of Environmental Conditions on the Mechanical Properties of Flax Fiber Reinforced Thermoset Composites

Anurag Pisupati et al.

Summary: A new type of flax fiber-reinforced bio-sourced thermoset composites was investigated and compared with flax fiber reinforced epoxy composites in hot and humid aging conditions. The results showed that the bio-sourced flax/benzoxazine composites exhibited better mechanical properties and higher recovery after aging compared to flax/epoxy composites, indicating their potential for development in the future.

APPLIED COMPOSITE MATERIALS (2021)

Article Materials Science, Textiles

Post-Impact Compression Behavior of Natural Flax Fiber Composites

Mohamed Habibi et al.

JOURNAL OF NATURAL FIBERS (2020)

Article Materials Science, Textiles

Damage Analysis of Low-Velocity Impact of Non-Woven Flax Epoxy Composites

Mohamed Habibi et al.

JOURNAL OF NATURAL FIBERS (2020)

Review Materials Science, Composites

Analytical modeling and experimental validation of the low-velocity impact response of hemp and hemp/glass thermoset composites

Simonetta Boria et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

Article Materials Science, Multidisciplinary

Low-Velocity Impact and Compression-After-Impact Behaviour of Flax Fibre-Reinforced Composites

Yan Li et al.

ACTA MECHANICA SOLIDA SINICA (2020)

Article Materials Science, Characterization & Testing

Mechanical, low-velocity impact, and hydrothermal aging properties of flax/carbon hybrid composite plates

Anni Wang et al.

POLYMER TESTING (2020)

Article Materials Science, Multidisciplinary

The post-impact response of flax/UP composite laminates under low velocity impact loading

H. N. Dhakal et al.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2019)

Review Materials Science, Composites

Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite

Yann Lebaupin et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

Article Engineering, Manufacturing

Numerical simulation correlating the low velocity impact behaviour of flax/epoxy laminates

Benedict Lawrence Sy et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Article Materials Science, Composites

Novel approach for silane treatment of flax fiber to improve the interfacial adhesion in flax/bio epoxy composites

Babak Fathi et al.

JOURNAL OF COMPOSITE MATERIALS (2019)

Article Materials Science, Composites

Impact energy absorption of flax fiber-reinforced polypropylene composites

Md Zillur Rahman et al.

POLYMER COMPOSITES (2018)

Article Engineering, Manufacturing

Damage evolution in unidirectional and cross-ply flax/epoxy laminates subjected to low velocity impact loading

Benedict Lawrence Sy et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Article Engineering, Multidisciplinary

Analytical model of the dynamic behaviour of CFRP plates subjected to low-velocity impacts

M. Salvetti et al.

COMPOSITES PART B-ENGINEERING (2018)

Article Materials Science, Composites

Interlaminar fracture toughness of flax-epoxy composites

F. Bensadoun et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)

Article Mechanics

Low velocity impact properties of flax composites

F. Bensadoun et al.

COMPOSITE STRUCTURES (2017)

Review Engineering, Manufacturing

A review of recent developments in natural fibre composites and their mechanical performance

K. L. Pickering et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Article Engineering, Multidisciplinary

Numerical modelling of flax short fibre reinforced and flax fibre fabric reinforced polymer composites

Janis Sliseris et al.

COMPOSITES PART B-ENGINEERING (2016)

Article Agricultural Engineering

Environmental impact assessment of end of life options for flax-MAPP composites

Farida Bensadoun et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

Article Materials Science, Composites

Effect of thickness on the impact resistance of flax fibre-reinforced polymer

Wenjie Wang et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2016)

Proceedings Paper Materials Science, Composites

Analytical model to describe damage in CFRP specimen when subjected to low velocity impacts

M. Salvetti et al.

2ND INTERNATIONAL SYMPOSIUM ON DYNAMIC RESPONSE AND FAILURE OF COMPOSITE MATERIALS, (DRAF 2016) (2016)

Article Engineering, Mechanical

Impact behaviour of flax/epoxy composite plates

Shaoxiong Liang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2015)

Article Materials Science, Multidisciplinary

Impact behavior and damage characteristics of hygrothermally conditioned carbon epoxy composite laminates

Yucheng Zhong et al.

MATERIALS & DESIGN (2015)

Article Thermodynamics

THERMAL PROPERTIES OF FLAX FIBER SCOURED BY DIFFERENT METHODS

Zheng-e Dong et al.

THERMAL SCIENCE (2015)

Article Materials Science, Multidisciplinary

Innovative flax tapes reinforced Acrodur biocomposites: A new alternative for automotive applications

M. Khalfallah et al.

MATERIALS & DESIGN (2014)

Article Materials Science, Characterization & Testing

Influence of temperature and impact velocity on the impact response of jute/UP composites

H. N. Dhakal et al.

POLYMER TESTING (2014)

Article Materials Science, Composites

On the static and dynamic properties of flax and Cordenka epoxy composites

James Meredith et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

Review Materials Science, Multidisciplinary

A review on the degradability of polymeric composites based on natural fibres

Z. N. Azwa et al.

MATERIALS & DESIGN (2013)

Review Materials Science, Composites

Hemp fiber and its composites - a review

Asim Shahzad

JOURNAL OF COMPOSITE MATERIALS (2012)

Review Polymer Science

Biocomposites reinforced with natural fibers: 2000-2010

Omar Faruk et al.

PROGRESS IN POLYMER SCIENCE (2012)

Article Engineering, Multidisciplinary

A review on the tensile properties of natural fiber reinforced polymer composites

H. Ku et al.

COMPOSITES PART B-ENGINEERING (2011)

Article Engineering, Manufacturing

Mechanical properties of short-flax-fibre reinforced compounds

Harriette L. Bos et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)

Article Engineering, Multidisciplinary

Damage in CFRPs due to low velocity impact at low temperature

TGD Rio et al.

COMPOSITES PART B-ENGINEERING (2005)

Article Engineering, Manufacturing

Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization

A Arbelaiz et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)

Article Engineering, Manufacturing

Are natural fiber composites environmentally superior to glass fiber reinforced composites?

SV Joshi et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)

Article Engineering, Manufacturing

Analytical prediction of large mass impact damage in composite laminates

R Olsson

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)