Related references
Note: Only part of the references are listed.Slip transition in dynamic wetting for a generalized Navier boundary condition
Valentin Rougier et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)
Compaction, nesting and image based permeability analysis of multi-layer dry preforms by computed tomography (CT)
Z. Yousaf et al.
COMPOSITE STRUCTURES (2021)
Edge flow profile under radial injection at constant pressure: Analytical predictions vs. experiment
Sergey G. Abaimov et al.
COMPOSITE STRUCTURES (2020)
Dynamic Wetting of Molten Polymers on Cellulosic Substrates: Model Prediction for Total and Partial Wetting
Monica Francesca Pucci et al.
FRONTIERS IN MATERIALS (2020)
Influence of intra-yarn flows on whole 3D woven fabric numerical permeability: from Stokes to Stokes-Darcy simulations
Aubin Geoffre et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2020)
Effect of wettability on viscous fluid impregnation in single-layer woven-fibre bundles driven by pressure difference
Kota Yoshihara et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Role of interface formation versus fibres properties in the mechanical behaviour of bio-based composites manufactured by Liquid Composite Molding processes
Pierre-Jacques Liotier et al.
COMPOSITES PART B-ENGINEERING (2019)
Out-of-plane capillary pressure of technical textiles
Bjoern Willenbacher et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Numerical modeling of local capillary effects in porous media as a pressure discontinuity acting on the interface of a transient bi-fluid flow
Koloina Andriamananjara et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2019)
Accounting for local capillary effects in two-phase flows with relaxed surface tension formulation in enriched finite elements
Loic Chevalier et al.
COMPTES RENDUS MECANIQUE (2018)
Temperature effect on dynamic wetting of cellulosic substrates by molten polymers for composite processing
Monica Francesca Pucci et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Resin infusion-based processes simulation : coupled Stokes-Darcy flows in orthotropic preforms undergoing finite strain
Maxime Blais et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2017)
Wetting and swelling property modifications of elementary flax fibres and their effects on the Liquid Composite Molding process
Monica Francesca Pucci et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Capillary wicking in flax fabrics - Effects of swelling in water
Monica Francesca Pucci et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2016)
Towards void formation and permeability predictions in LCM processes: A computational bifluid-solid mechanics framework dealing with capillarity and wetting issues
Yujie Liu et al.
COMPTES RENDUS MECANIQUE (2016)
Capillary wicking in a fibrous reinforcement - Orthotropic issues to determine the capillary pressure components
Monica Francesca Pucci et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Capillary effects on flax fibers - Modification and characterization of the wetting dynamics
Monica Francesca Pucci et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Determination of the optimal impregnation velocity in Resin Transfer Molding by capillary rise experiments and infrared thermography
C. Ravey et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Dynamic saturation curve measurement for resin flow in glass fibre reinforcement
Markus Nordlund et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Diameter dependence of the apparent tensile modulus of hemp fibres: A morphological, structural or ultrastructural effect?
Vincent Placet et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Capillary effects in vacuum-assisted resin transfer molding with natural fibers
Gaston Francucci et al.
POLYMER COMPOSITES (2012)
Wetting analysis and surface characterisation of coir fibres used as reinforcement for composites
L. Q. N. Tran et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)
Wetting behaviour and surface properties of technical bamboo fibres
C. A. Fuentes et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)
Environmental Impact Analysis of the Production of Flax Fibres to be Used as Composite Material Reinforcement
Antoine Le Duigou et al.
JOURNAL OF BIOBASED MATERIALS AND BIOENERGY (2011)
Modeling the impact of capillary pressure and air entrapment on fiber tow saturation during resin infusion in LCM
Jeffrey M. Lawrence et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Numerical modelling of liquid infusion into fibrous media undergoing compaction
Pierre Celle et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2008)
On measuring wettability in infiltration processing
Veronique Michaud et al.
SCRIPTA MATERIALIA (2007)
Spontaneous radial capillary impregnation across a bank of aligned micro-cylinders - Part I: Theory and model development
V. Neacsu et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2006)
Spontaneous radial capillary impregnation across a bank of aligned micro-cylinders. Part II: Experimental investigations
V. Neacsu et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2006)
Dynamic capillary effects in liquid composite moulding with non-crimp fabrics
J Verrey et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Natural fibres: can they replace glass in fibre reinforced plastics?
P Wambua et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Numerical simulation of void formation in LCM
J Breard et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase
C Baley
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
An experimental study of the permeability and capillary pressure in resin-transfer moulding
S Amico et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
Share Paper
