☆ 4.8 Review

From Materials to Cell: State-of-the-Art and Prospective Technologies for Lithium-Ion Battery Electrode Processing

CHEMICAL REVIEWS (2022)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Mechanistic understanding of microwave-vacuum drying of non-deformable porous media

Jhony T. Teleken et al.

Summary: This study proposed a mathematical model for describing the drying process of porous media under microwave heating in a vacuum, validated through experiments on ceramic samples. The research found that drainage is the primary mode of transport in microwave vacuum drying, with the evaporation rate constant identified as a key parameter affecting drying kinetics.

DRYING TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Aqueous Ni-rich-cathode dispersions processed with phosphoric acid for lithium-ion batteries with ultra-thick electrodes

Alexander Kukay et al.

Summary: The production of lithium-ion batteries (LIB) can benefit economically and environmentally from aqueous processing, although issues still exist with ultra-thick cathodes. An investigation into mitigating corrosion by adjusting the pH of the dispersion with phosphoric acid has been conducted, resulting in a technique for producing aqueous processed cathodes with improved surface cracking and high-rate discharge capacity.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Investigating the relationship between internal short circuit and thermal runaway of lithium-ion batteries under thermal abuse condition

Dongsheng Ren et al.

Summary: Thermal runaway, a critical issue in the application of lithium-ion batteries, is a thermalelectrical coupled process where exothermic chemical reactions and internal short circuit coincide. This study investigates the relationship between internal short circuit and thermal runaway under thermal abuse conditions, finding the limited contribution of internal short circuit to thermal runaway. The results provide new insights into battery thermal runaway mechanism and safety design.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Circular economy strategies for electric vehicle batteries reduce reliance on raw materials

Joris Baars et al.

Summary: New battery chemistry can reduce reliance on cobalt for electric vehicles, but circular economy strategies are needed to prevent burden shifting to other resources. The adoption of lithium-ion batteries in electric vehicles will increase demand for natural resources, leading to new challenges and risks in the supply chain. To strengthen resilience and sustainability, circular economy strategies are essential to reduce primary resource requirements.

NATURE SUSTAINABILITY (2021)

Add to Collection

Article Electrochemistry

The effects of ambient storage conditions on the structural and electrochemical properties of NMC-811 cathodes for Li-ion batteries

Chiara Busa et al.

Summary: High-Ni cathode materials are reactive and unstable when exposed to ambient humidity, affecting the storage and processing of Li-ion batteries. A study using various methods investigated the impact of humidity on battery performance, emphasizing the importance of handling high Ni materials properly.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Electrochemistry

Micro-macroscopic modeling of a lithium-ion battery by considering grain boundaries of active materials

Susmita Sarkar et al.

Summary: This study investigates the impact of grain boundaries on battery performance, revealing that grain boundary diffusion significantly affects the voltage profile and maximum stress in the cell. Variability in grain structure geometry results in particles with lower diffusion at the rear side enduring more stress than highly diffusive frontal particles.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Review Chemistry, Physical

Toward the Scale-Up of Solid-State Lithium Metal Batteries: The Gaps between Lab-Level Cells and Practical Large-Format Batteries

Lei Xu et al.

Summary: The scale-up process of solid-state lithium metal batteries is crucial for improving battery safety and energy density. While advanced approaches have shown success in lab-scale cells, challenges remain in applying these results to practical large-scale batteries. Promising opportunities to overcome these challenges are identified and feasible future strategies are proposed to guide further research.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Review Polymer Science

Challenges in Solvent-Free Methods for Manufacturing Electrodes and Electrolytes for Lithium-Based Batteries

Nina Verdier et al.

Summary: The challenges of lithium battery manufacturing lie in cost and environmental impact. Solvent-casting method is commonly used but has disadvantages. Solvent-free processes, including heat-based and spray-based methods, show promise in developing cost-effective and environmentally friendly lithium batteries. Among these methods, hot-pressing and melt processing are the most commonly used alternatives for both polymer-based electrolytes and electrodes.

POLYMERS (2021)

Add to Collection

Article Chemistry, Physical

Cobalt-free concentration-gradient Li[Ni0.9Mn0.1]O2 cathode material for lithium-ion batteries

Shan Zhang et al.

Summary: The cathodes of LiNiO2, Li[Ni0.9Mn0.1]O2, and the concentration gradient material Li[Ni0.9Mn0.1]O2 were synthesized by co-precipitation method. Tests showed that the gradient material G-LNM91 exhibited the best cycle performance among the three materials, with significant improvement in cycle performance due to manganese substitution.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Cobalt-free, high-nickel layered oxide cathodes for lithium-ion batteries: Progress, challenges, and perspectives

Youngjin Kim et al.

Summary: This article discusses the necessity and key factors for developing cobalt-free high-Ni layered oxides from the perspective of materials science and electrochemistry. Several aspects that need to be considered and the exploration of alternative dopants and substituents are proposed.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Machine learning 3D-resolved prediction of electrolyte infiltration in battery porous electrodes

Abbos Shodiev et al.

Summary: An innovative machine learning model based on MLP approach has been proposed to predict electrolyte flow and wetting degree in LIB electrodes accurately and quickly. The trained ML model, along with systematic sensitivity analysis, provides a new way to optimize electrode wetting and infiltration conditions.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Energy & Fuels

Economies of scale in battery cell manufacturing: The impact of material and process innovations

Lukas Mauler et al.

Summary: Exploiting economies of scale in battery production is essential to reducing high battery costs and advancing the battery industry towards a long-term climate-neutral society. Current battery literature lacks consensus on optimal plant sizes, indicating a need for further research in this area.

APPLIED ENERGY (2021)

Add to Collection

Review Energy & Fuels

Opportunities for the State-of-the-Art Production of LIB Electrodes-A Review

Silje Nornes Bryntesen et al.

Summary: Transitioning from internal combustion engine vehicles to electric vehicles is crucial for reducing emissions, but the production of Li-ion batteries used in EVs is energy-intensive, especially during the drying processes which are seldomly researched in the battery industry. Understanding advanced drying techniques and solvent evaporation mechanisms within the LIB industry is vital for optimizing process conditions.

ENERGIES (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Reduction, reuse and recycle of spent Li-ion batteries for automobiles: A review

Toyohisa Fujita et al.

Summary: This paper discusses the reuse and recycling technologies of Li-ion batteries, including methods to reduce the utilization of valuable rare metals and the amount of spent batteries, as well as introducing and discussing various technological processes.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

A review of current collectors for lithium-ion batteries

Pengcheng Zhu et al.

Summary: This review article presents six types of materials for current collectors, including Al, Cu, Ni, Ti, stainless steel and carbonaceous materials, and compares them based on five aspects of electrochemical stability, electrical conductivity, mechanical property, density, and sustainability. The effects of three different structures of foil, mesh, and foam as well as two treatments of chemical etching and coating are also discussed, highlighting future opportunities for next-generation lithium-ion batteries.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Review Materials Science, Multidisciplinary

A review on the stability and surface modification of layered transition-metal oxide cathodes

Ju-Myung Kim et al.

Summary: The increasing demand for high energy density batteries and stable electrochemical performance has drawn attention to the promising candidates of layered transition metal oxides, facing challenges in stability. Various surface modification strategies have been pursued to enhance the stability of these cathode materials.

MATERIALS TODAY (2021)

Add to Collection

Review Energy & Fuels

Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure

Fabian Duffner et al.

Summary: This review highlights the current production status of representative PLIBs and the advantages of lithium-ion batteries as advanced electrochemical energy storage technology. It also discusses the research and manufacturing processes of post-lithium technologies.

NATURE ENERGY (2021)

Add to Collection

Article Engineering, Chemical

Controlling Drying Stress and Mechanical Properties of Battery Electrodes Using a Capillary Force-Induced Suspension System

Jieun Park et al.

Summary: The capillary suspension processing method enhances the drying characteristics and mechanical stability of battery electrodes, while also reducing residual stress and improving sustainability. This approach may have potential applications in next-generation battery technologies such as flexible or thick electrodes.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

Add to Collection

Article Electrochemistry

Can Greener Cyrene Replace NMP for Electrode Preparation of NMC 811 Cathodes?

Hui Zhou et al.

Summary: NMP is a commonly used solvent in the lithium battery field, but its high toxicity has led to a search for greener alternatives. Cyrene has emerged as a promising candidate due to its similar solvent properties to NMP. High temperature electrode processing with Cyrene has shown comparable performance to traditional NMP fabrication, suggesting that Cyrene could be a viable green alternative.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Recovery of Cathode Materials and Aluminum Foil Using a Green Solvent

Yaocai Bai et al.

Summary: The study successfully recovered valuable cobalt-containing cathode materials using the green solvent triethyl phosphate, and achieved effective separation of cathode materials and current collectors without compromising material performance.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Multidisciplinary Sciences

Current and future lithium-ion battery manufacturing

Yangtao Liu et al.

Summary: Lithium-ion batteries have seen rapid growth in their application fields and market share in modern society, with significant achievements in material research. However, there is a lag in research on manufacturing processes, leading to hidden issues in production.

ISCIENCE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Influence of Calendering on the Electrochemical Performance of LiNi0.9Mn0.05Al0.05O2 Cathodes in Lithium-Ion Cells

Richard Sim et al.

Summary: Electrode calendering improves the surface area and cycle life of the electrode, reducing capacity fade. Additionally, calendered cells exhibit improved pulse-power performance with a larger usable capacity range after long-term cycling.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Materials Science, Ceramics

Aqueous processing based novel composite electrode for Li-ion batteries using an environmentally benign binder

Hari Raj et al.

Summary: This study focuses on using water-based electrode processing and replacing toxic materials with environmentally benign alternatives in the manufacturing of Li-ion batteries. The synergistic effect of PEDOT:PSS with MWCNTs and carbon black on LiFePO4 cathode performance shows potential for improving battery efficiency and sustainability.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Electrochemistry

Enabling aqueous processing for LiNi0.80Co0.15Al0.05O2 (NCA)-based lithium-ion battery cathodes using polyacrylic acid

W. Blake Hawley et al.

Summary: This study investigated the use of poly acrylic acid (PAA) as a corrosion-mitigating and surface-stabilizing agent in aqueous processing of LiNi0.80Co0.15Al0.05O2 (NCA) for lithium-ion battery cathodes. Adding PAA to the aqueous NCA slurry helped maintain stable pH and enhance electrochemical stability, but led to minor cracking and hindered rate capability. Despite lower initial capacity, the aqueous-processed cathode showed better capacity retention compared to the baseline.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Electrochemistry

Applying Established Water-Based Binders to Aqueous Processing of LiNi0.83Co0.12Mn0.05O2 Positive Electrodes

S. Radloff et al.

Summary: The study investigated the preparation of aqueous Ni-rich electrodes using a combination of SBR and PAA binders, achieving areal capacities of 2.7 mAh cm(-2) and densities up to 3.5 g cm(-3). The electrochemical evaluation showed that the performance heavily depends on the individual combination of binders, with the SBR-based electrode demonstrating excellent cycling stability at 1 C/1 C with capacity retention of 84% after 1,000 cycles.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Article Electrochemistry

Long-Term Cycling Performance of Aqueous Processed Ni-Rich LiNi0.8Co0.15Al0.05O2 Cathodes

Michael Hofmann et al.

Summary: A lithium phosphate surface coating can protect water-sensitive NCA particles during aqueous electrode manufacturing, with the spray drying process being an easy method for upscaling. The coating significantly reduces the formation of detrimental water-induced surface species, resulting in good long-term performance of full cells with water-based electrodes.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Add to Collection

Review Energy & Fuels

The Role of Pilot Lines in Bridging the Gap Between Fundamental Research and Industrial Production for Lithium-Ion Battery Cells Relevant to Sustainable Electromobility: A Review

Miriam Keppeler et al.

Summary: Despite extensive research on lithium-ion technology, the technological background for mass production of automotive lithium-ion batteries in Europe is young and not yet prepared to meet the demands of car manufacturers. Bridging the gap between fundamental research and industrial production is necessary to sustain the automobile manufacturing value chain in European countries, especially with the increasing popularity of electromobility. Challenges in knowledge transfer from lab scale to industry scale arise from differences in product configurations and objectives.

ENERGY TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Characterization and Laser Structuring of Aqueous Processed Li(Ni0.6Mn0.2Co0.2)O2 Thick-Film Cathodes for Lithium-Ion Batteries

Penghui Zhu et al.

Summary: In this study, aqueous processing of thick-film NMC 622 cathodes using carboxymethyl cellulose and fluorine acrylic hybrid latex as binders, with the addition of acetic acid to adjust slurry pH values, was investigated to improve traditional cathode manufacturing process.

NANOMATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Insight on electrolyte infiltration of lithium ion battery electrodes by means of a new three-dimensional-resolved lattice Boltzmann model

Abbos Shodiev et al.

Summary: Electrolyte filling is a crucial step in lithium ion battery manufacturing, affecting the quality and subsequent wetting process. A new 3D-LBM model has been developed to simulate the electrolyte filling process in LIB porous electrodes, emphasizing the impact of electrode mesostructures on filling dynamics.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Single crystal Ni-rich layered cathodes enabling superior performance in all-solid-state batteries with PEO-based solid electrolytes

Maoyi Yi et al.

Summary: Single-crystal LiNi0.6Mn0.1Co0.3O2 cathodes in ASSBs with PEO-based electrolyte exhibit higher Li+ diffusion coefficient, higher initial specific capacity, stable cycling performance, and exceptional rate capability compared to conventional polycrystalline LiNi0.6Mn0.1Co0.3O2 cathodes. The poor performance of polycrystalline cathodes is mainly attributed to structural deterioration and formation of a rock-salt phase. Single-crystal Ni-rich cathodes show promise in achieving ASSBs with high energy and power density.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Engineering, Industrial

Water-based manufacturing of lithium ion battery for life cycle impact mitigation

Chris Yuan et al.

Summary: Water-based manufacturing processes for lithium ion batteries show potential for reducing energy consumption and minimizing environmental impacts compared to conventional manufacturing methods.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Prevention of lithium-ion battery thermal runaway using polymer-substrate current collectors

Martin T. M. Pham et al.

Summary: From the translation, we can understand that isolating electronically conducting material is a promising way to prevent thermal runaway in lithium-ion cells, and a metal-coated polymer current collector designed to disconnect internal short circuits shows reduced risk of thermal runaway during nail penetration. Through experiments, it was found that this type of current collector has lower mass and manufacturing costs, and reduces the risk of thermal runaway in cells during nail-penetration testing.

CELL REPORTS PHYSICAL SCIENCE (2021)

Add to Collection

Article Electrochemistry

Inline Monitoring of Battery Electrode Lamination Processes Based on Acoustic Measurements

Ruben Leithoff et al.

Summary: With the energy transition and growth of electromobility, the demand for lithium-ion batteries has increased, leading to a need for high-quality battery cells and electrochemical properties. Understanding the interactions between products and processes, implementing quality management measures, and inline capable process monitoring are essential factors.

BATTERIES-BASEL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Cathode-Electrolyte Interphase in Lithium Batteries Revealed by Cryogenic Electron Microscopy

Zewen Zhang et al.

Summary: The study reveals that, under normal operation conditions, there does not exist an intimate coating layer at the single-particle level in carbonate-based electrolyte, but upon brief external electrical shorting, a solid-electrolyte interphase might form on cathodes, which could be electrochemically converted into a stable, conformal CEI. This conformal CEI helps improve Coulombic efficiency and overall capacity retention of the battery, offering a different perspective compared to previous understanding in commercial carbonate-based electrolytes.

MATTER (2021)

Add to Collection

Article Energy & Fuels

Classification of Calendering-Induced Electrode Defects and Their Influence on Subsequent Processes of Lithium-Ion Battery Production

Till Guenther et al.

ENERGY TECHNOLOGY (2020)

Add to Collection

Article Energy & Fuels

Heated Calendering of Cathodes for Lithium-Ion Batteries with Varied Carbon Black and Binder Contents

Chris Meyer et al.

ENERGY TECHNOLOGY (2020)

Add to Collection

Article Energy & Fuels

The Influence of Different Post-Drying Procedures on Remaining Water Content and Physical and Electrochemical Properties of Lithium-Ion Batteries

Fabienne Huttner et al.

ENERGY TECHNOLOGY (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Image-based defect detection in lithium-ion battery electrode using convolutional neural networks

Olatomiwa Badmos et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2020)

Add to Collection

Article Engineering, Mechanical

Bio-inspired interfaces for easy-to-recycle lithium-ion batteries

Congrui Jin et al.

EXTREME MECHANICS LETTERS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Development of Polyolefin-Based Microporous Separators for Li-Ion Batteries: A Review

Ali Akbar Heidari et al.

CHEMICAL RECORD (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Co-Crosslinked Water-Soluble Biopolymers as a Binder for High-Voltage LiNi0.5Mn1.5O4|Graphite Lithium-Ion Full Cells

Matthias Kuenzel et al.

CHEMSUSCHEM (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Slot-die coating of perovskite solar cells: An overview

Rahul Patidar et al.

MATERIALS TODAY COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Towards Understanding of Cracking during Drying of Thick Aqueous-Processed LiNi0.8Mn0.1Co0.1O2 Cathodes

Ritu Sahore et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Energy & Fuels

In Situ Investigations of Simultaneous Two-Layer Slot Die Coating of Component-Graded Anodes for Improved High-Energy Li-Ion Batteries

Ralf Diehm et al.

ENERGY TECHNOLOGY (2020)

Add to Collection

Article Energy & Fuels

Production Research as Key Factor for Successful Establishment of Battery Production on the Example of Large-Scale Automotive Cells Containing Nickel-Rich LiNi0.8Mn0.1Co0.1O2 Electrodes

Miriam Keppeler et al.

ENERGY TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High-Nickel NMA: A Cobalt-Free Alternative to NMC and NCA Cathodes for Lithium-Ion Batteries

Wangda Li et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium Iron Aluminum Nickelate, LiNixFeyAlzO2-New Sustainable Cathodes for Next-Generation Cobalt-Free Li-Ion Batteries

Nitin Muralidharan et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Sustainable Direct Recycling of Lithium-Ion Batteries via Solvent Recovery of Electrode Materials

Yaocai Bai et al.

CHEMSUSCHEM (2020)

Add to Collection

Article Electrochemistry

Understanding the role of water-soluble guar gum binder in reducing capacity fading and voltage decay of Li -rich cathode for Li -ion batteries

Zu-Wei Yin et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Review Chemistry, Inorganic & Nuclear

Surface Modification Strategies for Improving the Cycling Performance of Ni-Rich Cathode Materials

Daniel Weber et al.

EUROPEAN JOURNAL OF INORGANIC CHEMISTRY (2020)

Add to Collection

Article Thermodynamics

Evaporation due to infrared heating and natural convection

Adrian S. Sabau et al.

HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Energy & Fuels

The influence of the anode overhang effect on the capacity of lithium-ion cells - a 0D-modeling approach

Johannes Philipp Fath et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Article Chemistry, Physical

Perspectives on the relationship between materials chemistry and roll-to-roll electrode manufacturing for high-energy lithium-ion batteries

David L. Wood et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Carbon Coated Porous Titanium Niobium Oxides as Anode Materials of Lithium-Ion Batteries for Extreme Fast Charge Applications

Hailong Lyu et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Water-Based Electrode Manufacturing and Direct Recycling of Lithium-Ion Battery Electrodes-A Green and Sustainable Manufacturing System

Jianlin Li et al.

ISCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Lithium and transition metal dissolution due to aqueous processing in lithium-ion battery cathode active materials

W. Blake Hawley et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

High accuracy in-situ direct gas analysis of Li-ion batteries

Linxiao Geng et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

High reactivity of the nickel-rich LiNi1-x-yMnxCoyO2 layered materials surface towards H2O/CO2 atmosphere and LiPF6-based electrolyte

Ana Cristina Martinez et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Long-Term Cyclability of NCM-811 at High Voltages in Lithium-Ion Batteries: an In-Depth Diagnostic Study

Wangda Li et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Review Energy & Fuels

Recent Advances in Titanium Niobium Oxide Anodes for High-Power Lithium-Ion Batteries

Tao Yuan et al.

ENERGY & FUELS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Lithium Ion Battery Electrodes Made Using Dimethyl Sulfoxide (DMSO)-A Green Solvent

Ming Wang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

First-Principles Study on the Mechanical Properties of Polymers Formed by the Electrochemical Reduction of Fluoroethylene Carbonate and Vinylene Carbonate

Yuki Kamikawa et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Physical

Correlating the influence of porosity, tortuosity, and mass loading on the energy density of LiNi0.6Mn0.2Co0.2O2 cathodes under extreme fast charging (XFC) conditions

Dhrupad Parikh et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

LiNixFeyAlzO2, a new cobalt-free layered cathode material for advanced Li-ion batteries

Nitin Muralidharan et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Physical

Effects of surface modification and organic binder type on cell performance of water-processed Ni-rich Li(Ni0.8Co0.1Mn0.1)O2 cathodes

Sireesha Pedaballi et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Engineering, Chemical

A novel online moisture monitoring method for vacuum drying of lithium ion battery powder

Fan Zhao et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Article Engineering, Mechanical

On electrolyte wetting through lithium-ion battery separators

Ali Davoodabadi et al.

EXTREME MECHANICS LETTERS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Sustainable recycling of cathode scraps via Cyrene-based separation

Yaocai Bai et al.

SUSTAINABLE MATERIALS AND TECHNOLOGIES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Extended Aqueous Processing on Structure, Chemistry, and Performance of Polycrystalline LiNixMnyCozO2 Cathode Powders

Luqman Azhari et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Lithium-ion batteries - Current state of the art and anticipated developments

Michel Armand et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Energy and environmental aspects in recycling lithium-ion batteries: Concept of Battery Identity Global Passport

Yaocai Bai et al.

MATERIALS TODAY (2020)

Add to Collection

Article Chemistry, Physical

Impact of Residual Lithium on the Adoption of High-Nickel Layered Oxide Cathodes for Lithium-Ion Batteries

Won Mo Seong et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Electrochemistry

Implications of Aqueous Processing for High Energy Density Cathode Materials: Part II. Water-Induced Surface Species on LiNi0.8Co0.15Al0.05O2

Michael Hofmann et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Engineering, Electrical & Electronic

From Cell to Battery System in BEVs: Analysis of System Packing Efficiency and Cell Types

Hendrik Loebberding et al.

WORLD ELECTRIC VEHICLE JOURNAL (2020)

Add to Collection

Article Electrochemistry

Implications of Aqueous Processing for High Energy Density Cathode Materials: Part I. Ni-Rich Layered Oxides

Michael Hofmann et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Review Electrochemistry

A Review on Temperature-Dependent Electrochemical Properties, Aging, and Performance of Lithium-Ion Cells

Mohammad Alipour et al.

BATTERIES-BASEL (2020)

Add to Collection

Article Electrochemistry

Study of the Reactions between Ni-Rich Positive Electrode Materials and Aqueous Solutions and their Relation to the Failure of Li-Ion Cells

Ines Hamam et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

The role of the pH value in water-based pastes on the processing and performance of Ni-rich LiNi0.5Mn0.3Co0.2O2 based positive electrodes

Lukas Ibing et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Electrochemistry

Effects of the Mixing Sequence on Making Lithium Ion Battery Electrodes

Ming Wang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Electrochemistry

Water-Based Process to the Preparation of Nickel-Rich Li(Ni0.8Co0.1Mn0.1)O2 Cathode

Jia-He Kuo et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Chemical stability and long-term cell performance of low-cobalt, Ni-Rich cathodes prepared by aqueous processing for high-energy Li-Ion batteries

Marissa Wood et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Electrochemistry

Optimisation of Formation and Conditioning Protocols for Lithium-Ion Electric Vehicle Batteries

Irene Rubio Lopez et al.

BATTERIES & SUPERCAPS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Surface double coating of a LiNiaCobAl1-a-bO2 (a > 0.85) cathode with TiOx and Li2CO3 to apply a water-based hybrid polymer binder to Li-ion batteries

Tatsuya Watanabe et al.

RSC ADVANCES (2020)

Add to Collection

Article Electrochemistry

Understanding Electrolyte Infilling of Lithium Ion Batteries

Christina Sauter et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

The effect of solid content on the rheological properties and microstructures of a Li-ion battery cathode slurry

Lixia Ouyang et al.

RSC ADVANCES (2020)

Add to Collection

Review Electrochemistry

Review-Emerging Trends in the Design of Electrolytes for Lithium and Post-Lithium Batteries

E. Quartarone et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Physical

Unveiling and Amplifying the Benefits of Carbon-Coated Aluminum Current Collectors for Sustainable LiNi0.5Mn1.5O4 Cathodes

Matthias Kuenzel et al.

ACS APPLIED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Producing high-performing silicon anodes by tailoring ionic liquids as electrolytes

Nedher Sanchez-Ramirez et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Electrolyte Design for Fast-Charging Li-Ion Batteries

E. R. Logan et al.

TRENDS IN CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Dendrite-free all-solid-state lithium batteries with lithium phosphorous oxynitride-modified lithium metal anode and composite solid electrolytes

Chunhua Wang et al.

NANO RESEARCH (2019)

Add to Collection

Article Energy & Fuels

A Bottom-Up Approach to Lithium-Ion Battery Cost Modeling with a Focus on Cathode Active Materials

Marc Wentker et al.

ENERGIES (2019)

Add to Collection

Article Automation & Control Systems

Rapid electrolyte wetting of lithium-ion batteries containing laser structured electrodes: in situ visualization by neutron radiography

Jan Bernd Habedank et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Electrochemistry

Effects of pH control by acid addition at the aqueous processing of cathodes for lithium ion batteries

Werner Bauer et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Physical

Towards water based ultra-thick Li ion battery electrodes - A binder approach

Lukas Ibing et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Degradation Mechanism of Ni-Enriched NCA Cathode for Lithium Batteries: Are Microcracks Really Critical?

Kang-Joon Park et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Analysis of electrolyte imbibition through lithium-ion battery electrodes

Ali Davoodabadi et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Fabrication and Application of Carboxymethyl Cellulose-Carbon Nanotube Aerogels

Linyu Long et al.

MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Ionic and Electronic Conduction in TiNb2O7

Kent J. Griffith et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Maintaining structure and voltage stability of Li-rich cathode materials by green water-soluble binders containing Na+ ions

Taolin Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Physical

Thermo-Electrochemical Stability Analytics of Electrode Materials

Mukul Parmananda et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Add to Collection

Article Electrochemistry

Understanding Dynamics of Electrochemical Double Layers via a Modified Concentrated Solution Theory

Zengming Zhang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Review Multidisciplinary Sciences

Recycling lithium-ion batteries from electric vehicles

Gavin Harper et al.

NATURE (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Vinyl Ethylene Carbonate as an Effective SEI-Forming Additive in Carbonate-Based Electrolyte for Lithium-Metal Anodes

Yang Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Multidisciplinary Sciences

Silicon-Carbon composite anodes from industrial battery grade silicon

Hanne Flaten Andersen et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Energy & Fuels

Electrode manufacturing for lithium-ion batteries-Analysis of current and next generation processing

W. Blake Hawley et al.

JOURNAL OF ENERGY STORAGE (2019)

Add to Collection

Article Chemistry, Physical

Oxygen vacancy modulated Ti2Nb10O29-x embedded onto porous bacterial cellulose carbon for highly efficient lithium ion storage

Shengjue Deng et al.

NANO ENERGY (2019)

Add to Collection

Review Energy & Fuels

Characterization and performance evaluation of lithium-ion battery separators

Marie Francine Lagadec et al.

NATURE ENERGY (2019)

Add to Collection

Article Energy & Fuels

Beneficial rheological properties of lithium-ion battery cathode slurries from elevated mixing and coating temperatures

W. Blake Hawley et al.

JOURNAL OF ENERGY STORAGE (2019)

Add to Collection

Article Energy & Fuels

Effect of calendering and temperature on electrolyte wetting in lithium-ion battery electrodes

Ali Davoodabadi et al.

JOURNAL OF ENERGY STORAGE (2019)

Add to Collection

Article Chemistry, Physical

High-Speed electron beam curing of thick electrode for high energy density Li-ion batteries

Zhijia Du et al.

GREEN ENERGY & ENVIRONMENT (2019)

Add to Collection

Article Chemistry, Physical

Solid-state electrolyte considerations for electric vehicle batteries

Hao Shen et al.

SUSTAINABLE ENERGY & FUELS (2019)

Add to Collection

Article Electrochemistry

Elucidation of Separator Effect on Energy Density of Li-Ion Batteries

Dhrupad Parikh et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Prospects of production technologies and manufacturing costs of oxide-based all-solid-state lithium batteries

Joscha Schnell et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Correlation between the physical parameters and the electrochemical performance of a silicon anode in lithium-ion batteries

Guobin Zhu et al.

JOURNAL OF MATERIOMICS (2019)

Add to Collection

Article Electrochemistry

Achievement of the High-Capacity Retention Rate for the Li[Ni0.8Co0.15Al0.05]O2 (NCA) Cathode Containing an Aqueous Binder with CO2 Gas Treatment Using the Cavitation Effect (CTCE)

Katsuya Kimura et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Electrochemistry

Localized Swelling Inhomogeneity Detection in Lithium Ion Cells Using Multi-Dimensional Laser Scanning

Yan Zhao et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Scalable Dry Processing of Binder-Free Lithium-Ion Battery Electrodes Enabled by Holey Graphene

Dylan J. Kirsch et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Computer Science, Information Systems

Enabling the Electric Future of Mobility: Robotic Automation for Electric Vehicle Battery Assembly

Ajit Sharma et al.

IEEE ACCESS (2019)

Add to Collection

Article Electrochemistry

Good Practices for Rechargeable Lithium Metal Batteries

Bingbin Wu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Article Electrochemistry

Weakened Capacity Fading of Li-Rich Cathode via Aqueous Binder for Advanced Lithium Ion Batteries

Meng Yu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Add to Collection

Proceedings Paper Engineering, Industrial

Automated inline visual inspection and 3D measuring in electrode manufacturing

Andreas Frommknecht et al.

OPTICAL MEASUREMENT SYSTEMS FOR INDUSTRIAL INSPECTION XI (2019)

Add to Collection

Article Chemistry, Physical

Wettability in electrodes and its impact on the performance of lithium-ion batteries

Dong Hyup Jeon

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Electrochemistry

Increased Cycling Performance of Li-Ion Batteries by Phosphoric Acid Modified LiNi0.5Mn1.5O4 Cathodes in the Presence of LiBOB

Maheeka Yapa Abeywardana et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMISTRY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Disintegration of Meatball Electrodes for LiNi x Mn y Co z O2 Cathode Materials

R. Xu et al.

EXPERIMENTAL MECHANICS (2018)

Add to Collection

Article Polymer Science

Water-soluble binder PAALi with terpene resin emulsion as tackifier for LiFePO4 cathode

Jiarong He et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Practical Beginner's Guide to Cyclic Voltammetry

Noemie Elgrishi et al.

JOURNAL OF CHEMICAL EDUCATION (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Comparative Analysis of Aqueous Binders for Acid High-Energy Li-Rich NMC as a Lithium-Ion Cathode and the Impact of Adding Phosphoric

Arefeh Kazzazi et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Energy & Fuels

Model-based thermal runaway prediction of lithium-ion batteries from kinetics analysis of cell components

Dongsheng Ren et al.

APPLIED ENERGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Complementary Strategies Toward the Aqueous Processing of High-Voltage LiNi0.5Mn1.5O4 Lithium-Ion Cathodes

Matthias Kuenzel et al.

CHEMSUSCHEM (2018)

Add to Collection

Article Electrochemistry

Water-based LiNi1/3Mn1/3Co1/3O2-cathodes with good electrochemical performance by use of additives

Michaela Memm et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Electrochemistry

Three-dimensional conductive network formed by carbon nanotubes in aqueous processed NMC electrode

Zhijia Du et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Electrochemistry

Enabling high rate charge and discharge capability, low internal resistance, and excellent cycleability for Li-ion batteries utilizing graphene additives

Hsiu-Ling Tsai et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Energy & Fuels

Analysis of Manufacturing-Induced Defects and Structural Deformations in Lithium-Ion Batteries Using Computed Tomography

Yi Wu et al.

ENERGIES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Chemo-mechanical expansion of lithium electrode materials - on the route to mechanically optimized all-solid-state batteries

Raimund Koerver et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Dissolution, migration, and deposition of transition metal ions in Li-ion batteries exemplified by Mn-based cathodes - a critical review

Chun Zhan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Si Oxidation and H2 Gassing During Aqueous Slurry Preparation for Li-Ion Battery Anodes

Kevin A. Hays et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Article Chemistry, Physical

All-solid-state lithium-ion and lithium metal batteries - paving the way to large-scale production

Joscha Schnell et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Short-range contacts govern the performance of industry-relevant battery cathodes

Samantha L. Morelly et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Binder migration during drying of lithium-ion battery electrodes: Modelling and comparison to experiment

F. Font et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

What makes lithium substituted polyacrylic acid a better binder than polyacrylic acid for silicon-graphite composite anodes?

Kevin A. Hays et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Modeling and analysis of solvent removal during Li-ion battery electrode drying

Naresh Susarla et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Chemistry, Physical

Performance tuning of lithium ion battery cells with area-oversized graphite based negative electrodes

Tim Dagger et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Electrochemistry

Improvement of the Cyclability and Coulombic Efficiency of Li-Ion Batteries Using Li[Ni0.8Co0.15Al0.05]O2 Cathode Containing an Aqueous Binder with Pressurized CO2 Gas Treatment

Katsuya Kimura et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Electrochemistry

Improving the Electrochemical Performance of Polypropylene Separator through Instantaneous Photo-Induced Functionalization

Wenyi Zhu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Electrochemistry

Impact of Pore Tortuosity on Electrode Kinetics in Lithium Battery Electrodes: Study in Directionally Freeze-Cast LiNi0.8Co0.15Al0.05O2 (NCA)

Benjamin Delattre et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Physical

Mn versus Al in Layered Oxide Cathodes in Lithium-Ion Batteries: A Comprehensive Evaluation on Long-Term Cyclability

Wangda Li et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Review Energy & Fuels

Current status and challenges for automotive battery production technologies

Arno Kwade et al.

NATURE ENERGY (2018)

Add to Collection

Article Energy & Fuels

Identifying degradation mechanisms in lithium-ion batteries with coating defects at the cathode

Lamuel David et al.

APPLIED ENERGY (2018)

Add to Collection

Article Engineering, Electrical & Electronic

The Influence of Current Ripples on the Lifetime of Lithium-Ion Batteries

Martin Johannes Brand et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Physical

Balancing formation time and electrochemical performance of high energy lithium-ion batteries

Chengyu Mao et al.

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Electrochemistry

Characterization of Surface Free Energy of Composite Electrodes for Lithium-Ion Batteries

Ali Davoodabadi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Physical

Extending the Service Life of High-Ni Layered Oxides by Tuning the Electrode-Electrolyte Interphase

Jianyu Li et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Micron-size Silicon Monoxide Asymmetric Membranes for Highly Stable Lithium Ion Battery Anode

Ji Wu et al.

CHEMISTRYSELECT (2018)

Add to Collection

Article Electrochemistry

X-ray Based Visualization of the Electrolyte Filling Process of Lithium Ion Batteries

Antje Schilling et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Add to Collection

Article Engineering, Chemical

Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP

David L. Wood et al.

DRYING TECHNOLOGY (2018)

Add to Collection

Review Nanoscience & Nanotechnology

A review of laser electrode processing for development and manufacturing of lithium-ion batteries

Wilhelm Pfleging

NANOPHOTONICS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Alternative binders for sustainable electrochemical energy storage - the transition to aqueous electrode processing and bio-derived polymers

Dominic Bresser et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Electrochemistry

Sodium Alginate: A Water-Processable Binder in High-Voltage Cathode Formulations

Francesca Bigoni et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Review Chemistry, Physical

Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and Perspectives

Seung-Taek Myung et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Compatibility issues between electrodes and electrolytes in solid-state batteries

Yaosen Tian et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries

Jianlin Li et al.

JOM (2017)

Add to Collection

Article Chemistry, Physical

Investigation on xanthan gum as novel water soluble binder for LiFePO4 cathode in lithium-ion batteries

Jiarong He et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Electrochemistry

Understanding limiting factors in thick electrode performance as applied to high energy density Li-ion batteries

Zhijia Du et al.

JOURNAL OF APPLIED ELECTROCHEMISTRY (2017)

Add to Collection

Article Chemistry, Physical

Experimental investigation into battery electrode surfaces: The distribution of liquid at the surface and the emptying of pores during drying

Stefan Jaiser et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Carboxymethyl chitosan/poly(ethylene oxide) water soluble binder: Challenging application for 5 V LiNi0.5Mn1.5O4 cathode

Haoxiang Zhong et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Physical

Anisotropic Lattice Strain and Mechanical Degradation of High- and Low-Nickel NCM Cathode Materials for Li-Ion Batteries

Aleksandr O. Kondrakov et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Physical

Microstructure formation of lithium-ion battery electrodes during drying An - ex-situ study using cryogenic broad ion beam slope cutting and scanning electron microscopy (Cryo-BIB-SEM)

Stefan Jaiser et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

Investigation of binder distribution in graphite anodes for lithium-ion batteries

Marcus Mueller et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

Fast formation cycling for lithium ion batteries

Seong Jin An et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

Solvent-free dry powder coating process for low-cost manufacturing of LiNi1/3Mn1/3Co1/3O2 cathodes in lithium-ion batteries

Mohanad Al-Shroofy et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

Enabling aqueous processing for crack-free thick electrodes

Zhijia Du et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

The high-temperature and high-humidity storage behaviors and electrochemical degradation mechanism of LiNi0.6Co0.2Mn0.2O2 cathode material for lithium ion batteries

Zhiqiang Chen et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Electrochemistry

Is There a Benefit in Employing Graded Electrodes for Lithium-Ion Batteries?

Yanbo Qi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Electrochemistry

Chemical Weathering of Layered Ni-Rich Oxide Electrode Materials: Evidence for Cation Exchange

Ilya A. Shkrob et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Electrochemistry

Mechanistic Understanding of the Role of Evaporation in Electrode Processing

Malcolm Stein et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Electrochemistry

Correlation of Electrolyte Volume and Electrochemical Performance in Lithium-Ion Pouch Cells with Graphite Anodes and NMC532 Cathodes

Seong Jin An et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Electrochemistry

Design and Demonstration of Three-Electrode Pouch Cells for Lithium-Ion Batteries

Seong Jin An et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Intergranular Cracking as a Major Cause of Long-Term Capacity Fading of Layered Cathodes

Hao Liu et al.

NANO LETTERS (2017)

Add to Collection

Article Multidisciplinary Sciences

Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries

Pengfei Yan et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Advances in electrode materials for Li-based rechargeable batteries

Hui Zhang et al.

RSC ADVANCES (2017)

Add to Collection

Article Polymer Science

The Impotence of Non-Brownian Particles on the Gel Transition of Colloidal Suspensions

Samantha L. Morelly et al.

POLYMERS (2017)

Add to Collection

Review Chemistry, Physical

A review of Ni-based layered oxides for rechargeable Li-ion batteries

Jing Xu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Review Chemistry, Physical

Core-shell and concentration-gradient cathodes prepared via co-precipitation reaction for advanced lithium-ion batteries

Peiyu Hou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Review Chemistry, Physical

Recent advances in all-solid-state rechargeable lithium batteries

Chunwen Sun et al.

NANO ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Understanding Interfacial-Energy-Driven Dry Powder Mixing for Solvent-Free Additive Manufacturing of Li-Ion Battery Electrodes

Brandon Ludwig et al.

ADVANCED MATERIALS INTERFACES (2017)

Add to Collection

Article Energy & Fuels

The effect of external compressive loads on the cycle lifetime of lithium-ion pouch cells

Anup Barai et al.

JOURNAL OF ENERGY STORAGE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Performance and Ageing Robustness of Graphite/NMC Pouch Prototypes Manufactured through Eco-Friendly Materials and Processes

Nicholas Loeffler et al.

CHEMSUSCHEM (2017)

Add to Collection

Article Engineering, Chemical

Development of a three-stage drying profile based on characteristic drying stages for lithium-ion battery anodes

Stefan Jaiser et al.

DRYING TECHNOLOGY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Electrolyte Volume Effects on Electrochemical Performance and Solid Electrolyte Interphase in Si-Graphite/NMC Lithium-Ion Pouch Cells

Seong Jin An et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Food Science & Technology

Investigation of Carboxymethyl Cellulose (CMC) on Mechanical Properties of Cold Water Fish Gelatin Biodegradable Edible Films

Mahsa Tabari

FOODS (2017)

Add to Collection

Review Chemistry, Multidisciplinary

High-voltage positive electrode materials for lithium-ion batteries

Wangda Li et al.

CHEMICAL SOCIETY REVIEWS (2017)

Add to Collection

Article Engineering, Chemical

Simulation of microwave thin layer drying process by a new theoretical model

Jun Jiang et al.

CHEMICAL ENGINEERING SCIENCE (2017)

Add to Collection

Article Electrochemistry

Preparation of Water-Resistant Surface Coated High-Voltage LiNi0.5Mn1.5O4 Cathode and Its Cathode Performance to Apply a Water-Based Hybrid Polymer Binder to Li-Ion Batteries

Toyokazu Tanabe et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Article Electrochemistry

Temperature effects on SEI formation and cyclability of Si nanoflake powder anode in the presence of SEI-forming additives

Masakazu Haruta et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Article Chemistry, Physical

Nickel-Rich and Lithium-Rich Layered Oxide Cathodes: Progress and Perspectives

Arumugam Manthiram et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Energy & Fuels

Influence of Solvent Evaporation Rate in the Preparation of Carbon-Coated Lithium Iron Phosphate Cathode Films on Battery Performance

Attila Goren et al.

ENERGY TECHNOLOGY (2016)

Add to Collection

Article Pharmacology & Pharmacy

Twin Screw Extruders as Continuous Mixers for Thermal Processing: a Technical and Historical Perspective

Charlie Martin

AAPS PHARMSCITECH (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Thermal Stability and Reactivity of Cathode Materials for Li-Ion Batteries

Yiqing Huang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Review Engineering, Chemical

A Review of the Operating Limits in Slot Die Coating Processes

Xiaoyu Ding et al.

AICHE JOURNAL (2016)

Add to Collection

Article Physics, Applied

Surface degradation of Li1-xNi0.80Co0.15Al0.05O2 cathodes: Correlating charge transfer impedance with surface phase transformations

S. Sallis et al.

APPLIED PHYSICS LETTERS (2016)

Add to Collection

Review Chemistry, Physical

The state of understanding of the lithium-ion-battery graphite solid electrolyte interphase (SEI) and its relationship to formation cycling

Seong Jin An et al.

CARBON (2016)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Coating of Li[Ni0.33Mn0.33Co0.33]O2 Particles to Enable Aqueous Electrode Processing

Nicholas Loeffler et al.

CHEMSUSCHEM (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Advanced Separators for Lithium-Ion and Lithium-Sulfur Batteries: A Review of Recent Progress

Yinyu Xiang et al.

CHEMSUSCHEM (2016)

Add to Collection

Article Electrochemistry

Investigation and improvement on the electrochemical performance and storage characteristics of LiNiO2-based materials for lithium ion battery

Xiaobo Zheng et al.

ELECTROCHIMICA ACTA (2016)

Add to Collection

Article Electrochemistry

Towards high durable lithium ion batteries with waterborne LiFePO4 electrodes

Andriy Kvasha et al.

ELECTROCHIMICA ACTA (2016)

Add to Collection

Article Electrochemistry

Cross-Linked Solid Polymer Electrolyte for All-Solid-State Rechargeable Lithium Batteries

Hicham Ben Youcef et al.

ELECTROCHIMICA ACTA (2016)

Add to Collection

Article Thermodynamics

Application-specific electrical characterization of high power batteries with lithium titanate anodes for electric vehicles

Alexander Farmann et al.

ENERGY (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Electrolyte additives for lithium ion battery electrodes: progress and perspectives

Atetegeb Meazah Haregewoin et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Electrochemistry

The application of a water-based hybrid polymer binder to a high-voltage and high-capacity Li-rich solid-solution cathode and its performance in Li-ion batteries

Kouhei Notake et al.

JOURNAL OF APPLIED ELECTROCHEMISTRY (2016)

Add to Collection

Article Chemistry, Physical

Energy impact of cathode drying and solvent recovery during lithium-ion battery manufacturing

Shabbir Ahmed et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Chemistry, Physical

Carboxymethyl chitosan/conducting polymer as water-soluble composite binder for LiFePO4 cathode in lithium ion batteries

Haoxiang Zhong et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Chemistry, Physical

Changes of the balancing between anode and cathode due to fatigue in commercial lithium-ion cells

Karin Kleiner et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Chemistry, Physical

Effect of electrode manufacturing defects on electrochemical performance of lithium-ion batteries: Cognizance of the battery failure sources

D. Mohanty et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Electrochemistry

Electron Beam Curing of Composite Positive Electrode for Li-Ion Battery

Zhijia Du et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Add to Collection

Article Electrochemistry

Characterization of Electronic and Ionic Transport in Li1-xNi0.33Mn0.33Co0.33O2 (NMC333) and Li1-xNi0.50Mn0.20Co0.30O2 (NMC523) as a Function of Li Content

Ruhul Amin et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of aqueous-based cathode slurry pH and immersion time on corrosion of aluminum current collector in lithium-ion batteries

S. Y. Li et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2016)

Add to Collection

Article Materials Science, Multidisciplinary

High-rate performance of LiFe0.4Mn0.6PO4 cathode materials with poly(3,4-ethylenedioxythiopene):poly(styrene sulfonate)/carboxymethylcellulose

R. V. Apraksin et al.

MATERIALS LETTERS (2016)

Add to Collection

Article Engineering, Multidisciplinary

A method to quantify coating thickness and porosity of electrodes for lithium-ion-batteries

Ph. Just et al.

MEASUREMENT (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of solid loading on the processing and behavior of PEDOT:PSS binder based composite cathodes for lithium ion batteries

Pratik R. Das et al.

SYNTHETIC METALS (2016)

Add to Collection

Article Multidisciplinary Sciences

Failure mechanisms of single-crystal silicon electrodes in lithium-ion batteries

Feifei Shi et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Chemistry, Physical

Control and Optimization of the Electrochemical and Mechanical Properties of the Solid Electrolyte Interphase on Silicon Electrodes in Lithium Ion Batteries

Anton Tokranov et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Review Chemistry, Physical

Conveying Advanced Li-ion Battery Materials into Practice The Impact of Electrode Slurry Preparation Skills

Alexander Kraytsberg et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers

Rasheed Atif et al.

BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries

Brandon Ludwig et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Polymer Science

Study of Water-Based Lithium Titanate Electrode Processing: The Role of pH and Binder Molecular Structure

Diogo Vieira Carvalho et al.

POLYMERS (2016)

Add to Collection

Editorial Material Energy & Fuels

Getting solid

Yong-Sheng Hu

NATURE ENERGY (2016)

Add to Collection

Review Chemistry, Physical

Progress in electrolytes for rechargeable Li-based batteries and beyond

Qi Li et al.

GREEN ENERGY & ENVIRONMENT (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Evaluation Residual Moisture in Lithium-Ion Battery Electrodes and Its Effect on Electrode Performance

Jianlin Li et al.

MRS ADVANCES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Holey Graphene Nanomanufacturing: Structure, Composition, and Electrochemical Properties

Yi Lin et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Add to Collection

Article Electrochemistry

Functional binders as graphite exfoliation suppressants in aggressive electrolytes for lithium-ion batteries

Fabian Jeschull et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Electrochemistry

Cyanoethylated Carboxymethyl Chitosan as Water Soluble Binder with Enhanced Adhesion Capability and electrochemical performances for LiFePO4 Cathode

Jiarong He et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Electrochemistry

Effects of Capacity Ratios between Anode and Cathode on Electrochemical Properties for Lithium Polymer Batteries

Cheon-Soo Kim et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Performance Improvement of Lithium Manganese Phosphate by Controllable Morphology Tailoring with Acid-Engaged Nano Engineering

Hui Guo et al.

INORGANIC CHEMISTRY (2015)

Add to Collection

Article Chemistry, Physical

Electrode-Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights

Magali Gauthier et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Add to Collection

Article Chemistry, Physical

Heat transfer enhancement in a lithium-ion cell through improved material-level thermal transport

Vivek Vishwakarma et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Physical

Influence of dry mixing and distribution of conductive additives in cathodes for lithium ion batteries

Werner Bauer et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Physical

Characterization of mixed titanium-niobium oxide Ti2Nb10O29 annealed in vacuum as anode material for lithium-ion battery

Toshiki Takashima et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Physical

Prospects for reducing the processing cost of lithium ion batteries

David L. Wood et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Artificial Solid Electrolyte Interphase-Protected LixSi Nanoparticles: An Efficient and Stable Prelithiation Reagent for Lithium-Ion Batteries

Jie Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Article Electrochemistry

Characterization of Electronic and Ionic Transport in Li1-xNi0.8Co0.15Al0.05O2 (NCA)

Ruhul Amin et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Article Electrochemistry

Characterization of Lithium-Ion Battery Thermal Abuse Behavior Using Experimental and Computational Analysis

Carlos F. Lopez et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of gradual cobalt substitution on lithium nickel phosphate nano-scale composites for high voltage applications

Ahmet Ornek et al.

MATERIALS CHARACTERIZATION (2015)

Add to Collection

Article Materials Science, Multidisciplinary

New functional conducting poly-3,4-ethylenedioxythiopene: polystyrene sulfonate/carboxymethylcellulose binder for improvement of capacity of LiFePO4-based cathode materials

S. N. Eliseeva et al.

MATERIALS LETTERS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Li-ion battery materials: present and future

Naoki Nitta et al.

MATERIALS TODAY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Advances in spinet Li4Ti5O12 anode materials for lithium-ion batteries

Xiangcheng Sun et al.

NEW JOURNAL OF CHEMISTRY (2015)

Add to Collection

Article Engineering, Environmental

Recovery of cathode materials and Al from spent lithium-ion batteries by cleaning

Li-Po He et al.

WASTE MANAGEMENT (2015)

Add to Collection

Article Chemistry, Physical

Lithium Polyacrylate (LiPAA) as an Advanced Binder and a Passivating Agent for High-Voltage Li-Ion Batteries

Nicholas P. W. Pieczonka et al.

ADVANCED ENERGY MATERIALS (2015)

Add to Collection

Review Chemistry, Physical

Future generations of cathode materials: an automotive industry perspective

Dave Andre et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Review Energy & Fuels

Separators for Lithium-Ion Batteries: A Review on the Production Processes and Recent Developments

Valadoula Deimede et al.

ENERGY TECHNOLOGY (2015)

Add to Collection

Article Electrochemistry

Understanding Anomalous Behavior in Coulombic Efficiency Measurements on Li-Ion Batteries

Balazs Gyenes et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Recent advances in the electrolytes for interfacial stability of high-voltage cathodes in lithium-ion batteries

Nam-Soon Choi et al.

RSC ADVANCES (2015)

Add to Collection

Article Chemistry, Analytical

Non-destructive evaluation of slot-die-coated lithium secondary battery electrodes by in-line laser caliper and IR thermography methods

Debasish Mohanty et al.

ANALYTICAL METHODS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Processing of water-based LiNi1/3Mn1/3Co1/3O2 pastes for manufacturing lithium ion battery cathodes

Fatih A. Cetinel et al.

BULLETIN OF MATERIALS SCIENCE (2014)

Add to Collection

Article Materials Science, Ceramics

Effect of Al2O3/SiO2 composite ceramic layers on performance of polypropylene separator for lithium-ion batteries

Hongyu Liu et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Article Materials Science, Ceramics

Rheological properties and stability of NMP based cathode slurries for lithium ion batteries

Werner Bauer et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Electrolytes and Interphases in Li-Ion Batteries and Beyond

Kang Xu

CHEMICAL REVIEWS (2014)

Add to Collection

Review Chemistry, Physical

Recent Progress in Research on High-Voltage Electrolytes for Lithium-Ion Batteries

Shi Tan et al.

CHEMPHYSCHEM (2014)

Add to Collection

Article Electrochemistry

Improvement of the thermal stability of LiMn2O4/graphite cells with methylene methanedisulfonate as electrolyte additive

Xiaoxi Zuo et al.

ELECTROCHIMICA ACTA (2014)

Add to Collection

Review Chemistry, Multidisciplinary

A review of recent developments in membrane separators for rechargeable lithium-ion batteries

Hun Lee et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Chemistry, Applied

A Raman spectroscopic method to find binder distribution in electrodes during drying

Hideki Hagiwara et al.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion of aluminum electrodes in aqueous slurries for lithium-ion batteries

Benjamin C. Church et al.

JOURNAL OF MATERIALS SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Effect of a thin ceramic-coating layer on thermal and electrochemical properties of polyethylene separator for lithium-ion batteries

Chuan Shi et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

Modeling mass and density distribution effects on the performance of co-extruded electrodes for high energy density lithium-ion batteries

Code L. Cobb et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

Performance of LiNi1/3Mn1/3Co1/3O2/graphite batteries based on aqueous binder

Nicholas Loeffler et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

A novel slurry concept for the fabrication of lithium-ion battery electrodes with beneficial properties

Boris Bitsch et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

In-situ investigation of solid-electrolyte interphase formation on the anode of Li-ion batteries with Atomic Force Microscopy

Lixin Wang et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

State of health and charge measurements in lithium-ion batteries using mechanical stress

John Cannarella et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

Fabrication of all-solid-state battery using epitaxial Li CoO2 thin films

Susumu Shiraki et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

Capacity fading of LiAlyNi1-x-yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (effect of depth of discharge in charge-discharge cycling on the suppression of the micro-crack generation of LiAlyNi1-x-yCoxO2 particle)

Shoichiro Watanabe et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

Enabling aqueous binders for lithium battery cathodes - Carbon coating of aluminum current collector

Italo Doberdo et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

A comparative study of different binders and their effects on electrochemical properties of LiMn2O4 cathode in lithium ion batteries

Zhian Zhang et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Electrochemistry

The Origin of Stress in the Solid Electrolyte Interphase on Carbon Electrodes for Li Ion Batteries

A. Tokranov et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Electrochemistry

Microstructure Evolution in Lithium-Ion Battery Electrode Processing

Zhixiao Liu et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Electrochemistry

The Impact of Vinylene Carbonate, Fluoroethylene Carbonate and Vinyl Ethylene Carbonate Electrolyte Additives on Electrode/Electrolyte Reactivity Studied Using Accelerating Rate Calorimetry

Lin Ma et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Polymer Science

Effect of Al2O3 Coatings Prepared by RF Sputtering on Polyethylene Separators for High-Power Lithium Ion Batteries

Taejoo Lee et al.

MACROMOLECULAR RESEARCH (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and performance of layered Li[Li0.182Ni0.182Co0.091Mn0.545]O2 cathode with different binders

Zenghui Han et al.

MATERIALS LETTERS (2014)

Add to Collection

Article Energy & Fuels

Effect of calendering on electrode wettability in lithium-ion batteries

Yangping Sheng et al.

FRONTIERS IN ENERGY RESEARCH (2014)

Add to Collection

Proceedings Paper Electrochemistry

Cathode Materials Review

Claus Daniel et al.

REVIEW ON ELECTROCHEMICAL STORAGE MATERIALS AND TECHNOLOGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

In Situ Atomic Force Microscopy of Lithiation and Delithiation of Silicon Nanostructures for Lithium Ion Batteries

Collin R. Becker et al.

ACS NANO (2013)

Add to Collection

Article Electrochemistry

Investigations on high energy lithium-ion batteries with aqueous binder

Qingliu Wu et al.

ELECTROCHIMICA ACTA (2013)

Add to Collection

Article Chemistry, Physical

Optimization of multicomponent aqueous suspensions of lithium iron phosphate (LiFePO4) nanoparticles and carbon black for lithium-ion battery cathodes

Jianlin Li et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2013)

Add to Collection

Article Chemistry, Physical

Tris(trimethylsilyl) borate as an electrolyte additive to improve the cyclability of LiMn2O4 cathode for lithium-ion battery

Yanbo Liu et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Physical

Effect of tris(trimethylsilyl)borate on the high voltage capacity retention of LiNi0.5Co0.2Mn0.3O2/graphite cells

Xiaoxi Zuo et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Physical

Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x=1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries

Hyung-Joo Noh et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Electrochemistry

Lithium Ion Cell Performance Enhancement Using Aqueous LiFePO4 Cathode Dispersions and Polyethyleneimine Dispersant

Jianlin Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Electrochemistry

Theory of SEI Formation in Rechargeable Batteries: Capacity Fade, Accelerated Aging and Lifetime Prediction

Matthew B. Pinson et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Electrochemistry

Lattice Boltzmann Simulation for Electrolyte Transport in Porous Electrode of Lithium Ion Batteries

Sang Gun Lee et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Electrochemistry

How Do Reactions at the Anode/Electrolyte Interface Determine the Cathode Performance in Lithium-Ion Batteries?

Steffen Krueger et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Latex Migration in Battery Slurries during Drying

Sanghyuk Lim et al.

LANGMUIR (2013)

Add to Collection

Article Chemistry, Physical

Observation of Microstructural Evolution in Li Battery Cathode Oxide Particles by In Situ Electron Microscopy

Dean J. Miller et al.

ADVANCED ENERGY MATERIALS (2013)

Add to Collection

Article Multidisciplinary Sciences

Li-rich Thin Film Cathode Prepared by Pulsed Laser Deposition

Binggong Yan et al.

SCIENTIFIC REPORTS (2013)

Add to Collection

Article Oncology

Evaluation of Reproductive Disorders in Female Rats Exposed to N-Methyl-2-Pyrrolidone

Krystyna Sitarek et al.

BIRTH DEFECTS RESEARCH PART B-DEVELOPMENTAL AND REPRODUCTIVE TOXICOLOGY (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Design criteria for electrochemical shock resistant battery electrodes

William H. Woodford et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Add to Collection

Article Chemistry, Physical

Computational and experimental studies of laser cutting of the current collectors for lithium-ion batteries

Dongkyoung Lee et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection

Article Chemistry, Physical

Interactions between organic additives and active powders in water-based lithium iron phosphate electrode slurries

Chia-Chen Li et al.

JOURNAL OF POWER SOURCES (2012)

Add to Collection

Article Electrochemistry

Superior Performance of LiFePO4 Aqueous Dispersions via Corona Treatment and Surface Energy Optimization

Jianlin Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Optimization of LiFePO4 Nanoparticle Suspensions with Polyethyleneimine for Aqueous Processing

Jianlin Li et al.

LANGMUIR (2012)

Add to Collection

Article Chemistry, Physical

Electrochemical and electronic properties of LiCoO2 cathode investigated by galvanostatic cycling and EIS

Xiang-Yun Qiu et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2012)

Add to Collection

Review Biochemistry & Molecular Biology

Membranes in Lithium Ion Batteries

Min Yang et al.

MEMBRANES (2012)

Add to Collection

Review Chemistry, Multidisciplinary

Olivine LiFePO4: development and future

Yonggang Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Who will drive electric vehicles, olivine or spinel?

Ok Kyung Park et al.

ENERGY & ENVIRONMENTAL SCIENCE (2011)

Add to Collection

Article Chemistry, Physical

Electrochemical behavior and passivation of current collectors in lithium-ion batteries

Seung-Taek Myung et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Add to Collection

Article Chemistry, Physical

Electrochemical properties of cross-linked polymer electrolyte by electron beam irradiation and application to lithium ion batteries

M. Ueno et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. I. Experimental investigation

D. Andre et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Use of natural binders and ionic liquid electrolytes for greener and safer lithium-ion batteries

G. T. Kim et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Review Chemistry, Physical

Materials processing for lithium-ion batteries

Jianlin Li et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Aging of LiNi1/3Mn1/3Co1/3O2 cathode material upon exposure to H2O

Xiaoyu Zhang et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Review Chemistry, Physical

A review of the electrochemical performance of alloy anodes for lithium-ion batteries

Wei-Jun Zhang

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Electrochemistry

Binder Distributions in Water-Based and Organic-Based LiCoO2 Electrode Sheets and Their Effects on Cell Performance

Chia-Chen Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

Add to Collection

Article Engineering, Chemical

Efficiency of different dispersing devices for dispersing nanosized silica and alumina

Carsten Schilde et al.

POWDER TECHNOLOGY (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical characterization of LiPON films using nanoindentation

E. G. Herbert et al.

THIN SOLID FILMS (2011)

Add to Collection

Article Electrochemistry

Lithium Tetrafluoro Oxalato Phosphate as Electrolyte Additive for Lithium-Ion Cells

Yan Qin et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2010)

Add to Collection

Article Electrochemistry

Electrolyte Reactions with the Surface of High Voltage LiNi0.5Mn1.5O4 Cathodes for Lithium-Ion Batteries

Li Yang et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2010)

Add to Collection

Article Chemistry, Physical

Optimizing the surfactant for the aqueous processing of LiFePO4 composite electrodes

W. Porcher et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection

Article Chemistry, Physical

Porous cathode optimization for lithium cells: Ionic and electronic conductivity, capacity, and selection of materials

Y. -H. Chen et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection

Article Chemistry, Physical

Effect of slurry preparation process on electrochemical performances of LiCoO2 composite electrode

Gil-Won Lee et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection

Article Electrochemistry

Using Poly(4-Styrene Sulfonic Acid) to Improve the Dispersion Homogeneity of Aqueous-Processed LiFePO4 Cathodes

Chia-Chen Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

Add to Collection

Article Electrochemistry

Electrochemical Shock of Intercalation Electrodes: A Fracture Mechanics Analysis

William H. Woodford et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)

Add to Collection

Article Chemistry, Multidisciplinary

The Migration of Styrene Butadiene Latex during the Drying of Coating Suspensions: When and How Does Migration of Colloidal Particles Occur?

Yong-Hua Zang et al.

LANGMUIR (2010)

Add to Collection

Article Electrochemistry

Electrochemical behavior of current collectors for lithium batteries in non-aqueous alkyl carbonate solution and surface analysis by ToF-SIMS

Seung-Taek Myung et al.

ELECTROCHIMICA ACTA (2009)

Add to Collection

Article Electrochemistry

The Effect of Vinylene Carbonate Additive on Surface Film Formation on Both Electrodes in Li-Ion Batteries

L. El Ouatani et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)

Add to Collection

Article Chemistry, Physical

Preparation and characterization of a PVDF-HFP/PEGDMA-coated PE separator for lithium-ion polymer battery by electron beam irradiation

Joon-Yong Sohn et al.

RADIATION PHYSICS AND CHEMISTRY (2009)

Add to Collection

Article Chemistry, Physical

Development of dry polymer electrolyte based on polyethylene oxide with co-bridging agent crosslinked by electron beam

R. Uchiyama et al.

SOLID STATE IONICS (2009)

Add to Collection

Article Electrochemistry

Is LiFePO4 stable in water? Toward greener li-ion batteries

W. Porcher et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2008)

Add to Collection

Article Electrochemistry

Effect of carboxymethyl cellulose on aqueous processing of LiFePO4 cathodes and their electrochemical performance

Jin-Hyon Lee et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2008)

Add to Collection

Article Public, Environmental & Occupational Health

Assessment of reproductive toxicity and gonadotoxic potential of N-methyl-2-pyrrolidone in male rats

Krystyna Sitarek et al.

INTERNATIONAL JOURNAL OF OCCUPATIONAL MEDICINE AND ENVIRONMENTAL HEALTH (2008)

Add to Collection

Article Polymer Science

Surface structures and contact angles of electrospun poly(vinylidene fluoride) nanofiber membranes

Fenlin Huang et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2008)

Add to Collection

Article Chemistry, Physical

Measurements and predictive models for the N-methyl-2-pyrrolidone/water/methanol system

Santiago Aparicio et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2008)

Add to Collection

Article Chemistry, Physical

Aging of LiFePO4 upon exposure to H2O

K. Zaghib et al.

JOURNAL OF POWER SOURCES (2008)

Add to Collection

Article Electrochemistry

Storage characteristics of LiNi0.8Co0.1+xMn0.1-xO2 (x=0, 0.03, and 0.06) cathode materials for lithium batteries

Junho Eom et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)

Add to Collection

Article Chemistry, Physical

The effect of different kinds of nano-carbon conductive additives in lithium ion batteries on the resistance and electrochemical behavior of the LiCoO2 composite cathodes

Wang Guoping et al.

SOLID STATE IONICS (2008)

Add to Collection

Article Microscopy

Dispersion properties of aqueous-based LiFePO4 pastes and their electrochemical performance for lithium batteries

Jin-Hyon Lee et al.

ULTRAMICROSCOPY (2008)

Add to Collection

Article Chemistry, Physical

Effect of CO2 on layered Li1+zNi1-x-yCoxMyO2 (M =Al, Mn) cathode materials for lithium ion batteries

Kenji Shizuka et al.

JOURNAL OF POWER SOURCES (2007)

Add to Collection

Article Electrochemistry

Selection of conductive additives in Li-ion battery cathodes - A numerical study

Y.-H. Chen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Add to Collection

Article Electrochemistry

Effects of the solvent concentration (solid loading) on the processing and properties of the composite electrode

E. Ligneel et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)

Add to Collection

Article Chemistry, Physical

Investigation and improvement on the storage property of LiNi0.8Co0.2O2 as a cathode material for lithium-ion batteries

Hansan Liu et al.

JOURNAL OF POWER SOURCES (2006)

Add to Collection

Article Chemistry, Physical

High-power nanostructured LiMn2-xNixO4 high-voltage lithium-ion battery electrode materials:: Electrochemical impact of electronic conductivity and morphology

Muharrem Kunduraci et al.

CHEMISTRY OF MATERIALS (2006)

Add to Collection

Article Chemistry, Physical

Functional electrolytes: Novel type additives for cathode materials, providing high cycleability performance

K Abe et al.

JOURNAL OF POWER SOURCES (2006)

Add to Collection

Article Electrochemistry

Water adsorption and storage characteristics of optimized LiCoO2 and LiNi1/3Co1/3Mn1/3O2 composite cathode material for Li-ion cells

N Mijung et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)

Add to Collection

Article Electrochemistry

Improvements of dispersion homogeneity and cell performance of aqueous-processed LiCoO2 cathodes by using dispersant of PAA-NH4

CC Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)

Add to Collection

Article Electrochemistry

Comparisons of graphite and spinel Li1.33Ti1.67O4 as anode materials for rechargeable lithium-ion batteries

XL Yao et al.

ELECTROCHIMICA ACTA (2005)

Add to Collection

Article Electrochemistry

Effects of PAA-NH4 addition on the dispersion property of aqueous LiCoO2 slurries and the cell performance of As-prepared LiCoO2 cathodes

CC Li et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2005)

Add to Collection

Article Electrochemistry

Confirmation of long-term cyclability and high thermal stability of LiFePO4 in prismatic lithium-ion cells

M Takahashi et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Conductivity improvements to spray-produced LiFePO4 by addition of a carbon source

SL Bewlay et al.

MATERIALS LETTERS (2004)

Add to Collection

Article Chemistry, Physical

Li2CO3 in LiNi0.8Co0.15Al0.05O2 cathodes and its effects on capacity and power

GV Zhuang et al.

JOURNAL OF POWER SOURCES (2004)

Add to Collection

Article Electrochemistry

The cathode-electrolyte interface in the Li-ion battery

K Edström et al.

ELECTROCHIMICA ACTA (2004)

Add to Collection

Article Electrochemistry

Failure modes of silicon powder negative electrode in lithium secondary batteries

JH Ryu et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2004)

Add to Collection

Article Electrochemistry

Origin of deterioration for LiNiO2 cathode material during storage in air

HS Liu et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2004)

Add to Collection

Article Electrochemistry

Analysis of vinylene carbonate derived SEI layers on graphite anode

H Ota et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

Add to Collection

Article Chemistry, Physical

The role of Li-ion battery electrolyte reactivity in performance decline and self-discharge

SE Sloop et al.

JOURNAL OF POWER SOURCES (2003)

Add to Collection

Article Chemistry, Physical

LiMn2O4-based composites processed by a chemical-route microstructural, electrical, electrochemical, and mechanical characterization

MG Lazarraga et al.

JOURNAL OF POWER SOURCES (2003)

Add to Collection

Article Chemistry, Physical

A comparative study of Li-ion battery, supercapacitor and nonaqueous asymmetric hybrid devices for automotive applications

A Du Pasquier et al.

JOURNAL OF POWER SOURCES (2003)

Add to Collection

Article Electrochemistry

Structure and electrochemistry of Li[NixCo1-2xMnx]O2 (0≤x≤1/2)

DD MacNeil et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2002)

Add to Collection

Article Chemistry, Physical

Electronically conductive phospho-olivines as lithium storage electrodes

SY Chung et al.

NATURE MATERIALS (2002)

Add to Collection

Article Chemistry, Physical

A comparison of the electrode/electrolyte reaction at elevated temperatures for various Li-ion battery cathodes

DD MacNeil et al.

JOURNAL OF POWER SOURCES (2002)

Add to Collection

Article Chemistry, Physical

LiPF6-EC-EMC electrolyte for Li-ion battery

SS Zhang et al.

JOURNAL OF POWER SOURCES (2002)

Add to Collection

Article Electrochemistry

On the use of vinylene carbonate (VC) electrolyte solutions for Li-ion as an additive to batteries

D Aurbach et al.

ELECTROCHIMICA ACTA (2002)

Add to Collection

Article Electrochemistry

Layered Li[NixCo1-2xMnx]O2 cathode materials for lithium-ion batteries

ZH Lu et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2001)

Add to Collection

Article Electrochemistry

A novel coating technology for preparation of cathodes in Li-ion batteries

R Dominko et al.

ELECTROCHEMICAL AND SOLID STATE LETTERS (2001)

Add to Collection

Article Chemistry, Physical

Test of reaction kinetics using both differential scanning and accelerating rate calorimetries as applied to the reaction of LixCoO2 in non-aqueous electrolyte

DD MacNeil et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2001)

Add to Collection

Article Electrochemistry

Optimized LiFePO4 for lithium battery cathodes

A Yamada et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)

Add to Collection

Article Electrochemistry

Thermal stability studies of binder materials in anodes for lithium-ion batteries

H Maleki et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)

Add to Collection

Article Electrochemistry

Electrochemical stability of copper in lithium-ion battery electrolytes

MC Zhao et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.