4.7 Article

Spherical In2S3 anchored on g-C3N4 nanosheets for efficient elemental mercury removal in the wide temperature range

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Bimetallic sulfides ZnIn2S4 modified g-C3N4 adsorbent with wide temperature range for rapid elemental mercury uptake from coal-fired flue gas

Fangjun Wang et al.

Summary: A new type of bimetallic sulfide ZnIn2S4 modified g-C3N4 adsorbent has been prepared for capturing Hg-0 from coal-fired flue gas, showing stable adsorption efficiency and high capacity. The adsorbent is promising for mercury pollution remediation and may guide future development of similar materials for industrial flue gas treatment.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Nanosized ZnIn2S4 supported on facet-engineered CeO2 nanorods for efficient gaseous elemental mercury immobilization

Tao Jia et al.

Summary: CeO2/ZnIn2S4 composite material shows excellent adsorption performance towards elemental mercury in a wide temperature range, with higher adsorption capacity and better resistance to sulfur, oxygen, and nitrogen oxidation compared to pure CeO2. Density functional theory calculations and experimental results confirm that the active oxygen and sulfur sites on the surface are the most stable adsorption sites for mercury.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Effect of flue gas on elemental mercury removal capacity of defective carbonaceous surface: A first-principles study

Ping He et al.

Summary: This study investigates the atomic interaction between elemental mercury and defective carbonaceous surfaces using first-principles calculations. Vacancies were found to increase the activity of neighboring carbon atoms but decrease the mercury removal capacity. Various flue gas molecules were examined, showing different adsorption behaviors for mercury on the defective carbonaceous surface. Among these molecules, CO was found to enhance mercury removal efficiency, while CO2, NO, NO2, and H2O led to an increase in adsorption energies.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Shell-thickness-induced spontaneous inward migration of mercury in porous ZnO@CuS for gaseous mercury immobilization

Qinyuan Hong et al.

Summary: This study investigates the mercury adsorption performance and bonding stability of porous ZnO@CuS with different shell thicknesses. The porous shell structure allows for inward migration of Hg-0, improving adsorption performance and bonding stability. The optimal ZnO@CuS shows enhanced resistance against O-2, SO2, and H2O, making it promising for mercury adsorption on sulfides.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Facile preparation of nanosized copper sulfide functionalized macroporous skeleton for efficient vapor-phase mercury sequestration

Hailong Li et al.

Summary: The development of a feasible and facile synthesis procedure based on CTAB-assisted precipitation process has successfully produced nano-sized copper sulfide/PUF material with high throughput morphology, uniform distribution of active components, and various surface sulfur ligands, promising efficient Hg0 sequestration in a fixed-bed scenario.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Adsorption of Gaseous Mercury for Engineering Optimization: From Macrodynamics to Adsorption Kinetics and Thermodynamics

Qinyuan Hong et al.

Summary: This study designed a scale-up fixed-bed reaction unit with CuS-coated Al2O3 sorbent to investigate the influence of gaseous diffusion, particle size, and wall effect on Hg-0 removal. Lower gas flow rate enhanced mercury removal efficiency, and the combination of CuS/Al2O3 with a certain particle size and reaction tube maintained nearly complete mercury removal. The Hg-0 adsorption process was found to be controlled by external diffusion processes, with the parameters suggesting a spontaneous, irreversible, and endothermic progress.

ACS ES&T ENGINEERING (2021)

Article Engineering, Environmental

Recent advances in MnO2-based adsorbents for mercury removal from coal-fired flue gas

Dong Ye et al.

Summary: This review discusses the progress in the application of MnO2-based materials for mercury removal, summarizing the fundamentals of MnO2, the properties of various adsorbents, and the effects of gas species on mercury capture capacity. The possible mercury adsorption mechanisms and regeneration methods are also explored, with a suggestion for the development of new MnO2-based adsorbents for future research.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Review Engineering, Environmental

Novel carbon -based sorbents for elemental mercury removal from gas streams: A review

Dongjing Liu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Materials Science, Multidisciplinary

Adsorption of gas molecules on group III atoms adsorbed g-C3N4: A first-principles study

Kaifei Bai et al.

VACUUM (2020)

Article Engineering, Environmental

Stepwise Ions Incorporation Method for Continuously Activating PbS to Recover Mercury from Hg0-Rich Flue Gas

Qinyuan Hong et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Engineering, Environmental

Removal of elemental mercury from simulated flue gas by ZSM-5 modified with Mn-Fe mixed oxides

Zhen Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Engineering, Environmental

Anion exchange synthesis of hollow β-In2S3 nanoparticles: Adsorption and visible light photocatalytic performances

He Li et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Article Energy & Fuels

Gaseous Mercury Capture by Copper-Activated Nanoporous Carbon Nitride

Dongjing Liu et al.

ENERGY & FUELS (2018)

Article Chemistry, Inorganic & Nuclear

Incorporation of In2S3 Nanoparticles into a Metal-Organic Framework for Ultrafast Removal of Hg from Water

Linfeng Liang et al.

INORGANIC CHEMISTRY (2018)

Article Materials Science, Multidisciplinary

Graphitic carbon nitride for elemental mercury capture

Cheng Lu et al.

MATERIALS LETTERS (2018)

Article Chemistry, Analytical

Hierarchical spheres In2S3-based cataluminescence sensor for ammonium sulfide

Pingyang Cai et al.

MICROCHEMICAL JOURNAL (2018)

Review Environmental Sciences

Elemental mercury: Its unique properties affect its behavior and fate in the environment

Hansell Gonzalez-Raymat et al.

ENVIRONMENTAL POLLUTION (2017)

Article Engineering, Environmental

Is C3N4 Chemically Stable toward Reactive Oxygen Species in Sunlight-Driven Water Treatment?

Jiadong Xiao et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

Article Engineering, Environmental

[MoS4]2- Cluster Bridges in Co-Fe Layered Double Hydroxides for Mercury Uptake from S-Hg Mixed Flue Gas

Haomiao Xu et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)

Article Chemistry, Physical

A visible-light-driven heterojunction for enhanced photocatalytic water splitting over Ta2O5 modified g-C3N4 photocatalyst

Yuanzhi Hong et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Multidisciplinary

Formation of Hierarchical In2S3-CdIn2S4 Heterostructured Nanotubes for Efficient and Stable Visible Light CO2 Reduction

Sibo Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Engineering, Environmental

Coexistence of enhanced Hg0 oxidation and induced Hg2+ reduction on CuO/TiO2 catalyst in the presence of NO and NH3

Hailong Li et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Article Chemistry, Physical

Photocatalytic oxidation of gas-phase Hg0 on the exposed reactive facets of BiOI/BiOIO3 heterostructures

Ruixing Zhou et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Article Engineering, Environmental

Adsorptive removal of gas-phase mercury by oxygen non-thermal plasma modified activated carbon

Jun Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Article Engineering, Environmental

Copper modified activated coke for mercury removal from coal-fired flue gas

Bin Zhao et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Article Engineering, Environmental

Development of Nano-Sulfide Sorbent for Efficient Removal of Elemental Mercury from Coal Combustion Fuel Gas

Hailong Li et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)

Article Chemistry, Physical

Role of Pd nanoparticles in gas sensing behaviour of Pd@In2O3 yolk-shell nanoreactors

Prabhakar Rai et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Physical

Hydrothermal synthesis of In2S3/g-C3N4 heterojunctions with enhanced photocatalytic activity

Chaosheng Xing et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2014)

Article Materials Science, Multidisciplinary

Mechanical properties of doped g-C3N4 - A first-principle study

Lin-wei Ruan et al.

VACUUM (2014)

Article Engineering, Environmental

Photocatalytic degradation of 2,4,6-trichlorophenol over g-C3N4 under visible light irradiation

Huanhuan Ji et al.

CHEMICAL ENGINEERING JOURNAL (2013)

Review Engineering, Environmental

A Critical Review on the Heterogeneous Catalytic Oxidation of Elemental Mercury in Flue Gases

Yanshan Gao et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)

Review Engineering, Environmental

Mercury as a Global Pollutant: Sources, Pathways, and Effects

Charles T. Driscoll et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)

Editorial Material Multidisciplinary Sciences

Mercury and Health

Marcia McNutt

SCIENCE (2013)

Article Engineering, Environmental

Effect of SO2 on mercury binding on carbonaceous surfaces

Jing Liu et al.

CHEMICAL ENGINEERING JOURNAL (2012)

Article Chemistry, Physical

Photocatalytic performance of tetragonal and cubic β-In2S3 for the water splitting under visible light irradiation

Xianliang Fu et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2010)

Article Chemistry, Physical

From molecules to solids with the DMol3 approach

B Delley

JOURNAL OF CHEMICAL PHYSICS (2000)