Related references
Note: Only part of the references are listed.Experimental and numerical analysis of void structure in random packed beds of spheres
Jennie von Seckendorff et al.
POWDER TECHNOLOGY (2021)
Numerical study on porosity distribution and hydrodynamics of packed bed in narrow square channels
Anthony Basuni Hamzah et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2020)
Computational Fluid Dynamics for Fixed Bed Reactor Design
Anthony G. Dixon et al.
ANNUAL REVIEW OF CHEMICAL AND BIOMOLECULAR ENGINEERING, VOL 11 (2020)
Predicting the pressure drop of a biofilter and the specific surface area of the packing material
S. Woudberg et al.
POWDER TECHNOLOGY (2019)
Particle-resolved simulation of packed beds by non-body conforming locally refined orthogonal hexahedral mesh
Bing Yuan et al.
CHINESE JOURNAL OF CHEMICAL ENGINEERING (2019)
Computational study on fluid flow and heat transfer characteristic of hollow structured packed bed
Zehua Guo et al.
POWDER TECHNOLOGY (2019)
CFD analysis of fluid flow and particle-to-fluid heat transfer in packed bed with radial layered configuration
Zehua Guo et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Particle-resolved simulations of catalytic fixed bed reactors: Comparison of turbulence models, LES and PIV measurements
G.M. Karthik et al.
POWDER TECHNOLOGY (2019)
2D flow fields in fixed-bed reactor design: a robust methodology for continuum models
Philipp J. Donaubauer et al.
CHEMICAL ENGINEERING SCIENCE (2019)
Assessment of hydrodynamics in a novel bench-scale wall-cooled packed bioreactor under abiotic conditions
Gerardo A. Gomez-Ramos et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Synthetic Packed-Bed Generation for CFD Simulations: Blender vs. STAR-CCM
Steffen Flaischlen et al.
CHEMENGINEERING (2019)
Multiscale modeling of fixed-bed reactors with porous (open-cell foam) non-spherical particles: Hydrodynamics
Saurish Das et al.
CHEMICAL ENGINEERING JOURNAL (2018)
Computational study of flow and heat transfer in fixed beds with cylindrical particles for low tube to particle diameter ratios
Zhang Minhua et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2018)
Direct numerical simulation of fluid flow and mass transfer in dense fluid-particle systems with surface reactions
Jiangtao Lu et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Comparison of computational fluid dynamics (CFD) and pressure drop correlations in laminar flow regime for packed bed reactors and columns
Andraz Pavlisic et al.
POWDER TECHNOLOGY (2018)
Pore-scale simulation of flow and turbulence characteristics in three-dimensional randomly packed beds
Jiang Linsong et al.
POWDER TECHNOLOGY (2018)
On the influence of particle shape and process conditions in the pressure drop and hydrodynamics in a wall-effect fixed bed
R. Quintana-Solorzano et al.
CHEMICAL ENGINEERING COMMUNICATIONS (2018)
Rigid Body Dynamics Algorithm for Modeling Random Packing Structures of Nonspherical and Nonconvex Pellets
Elyas M. Moghaddam et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)
Effect of particle shape on fluid flow and heat transfer for methane steam reforming reactions in a packed bed
G. M. Karthik et al.
AICHE JOURNAL (2017)
Contact Modifications for CFD Simulations of Fixed-Bed Reactors: Cylindrical Particles
Gregor D. Wehinger et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Pressure drop in slender packed beds with novel packing arrangement
Zehua Guo et al.
POWDER TECHNOLOGY (2017)
An integrated workflow for resolved-particle packed bed models with complex particle shapes
Behnam Partopour et al.
POWDER TECHNOLOGY (2017)
Computational Fluid Dynamics Simulations of Gas-Phase Radial Dispersion in Fixed Beds with Wall Effects
Anthony G. Dixon et al.
FLUIDS (2017)
Local transport and reaction rates in a fixed bed reactor tube: Endothermic steam methane reforming
Anthony G. Dixon
CHEMICAL ENGINEERING SCIENCE (2017)
A simple approach to describe hydrodynamics and its effect on heat and mass transport in an industrial wall-cooled fixed bed catalytic reactor: ODH of ethane on a MoVNbTeO formulation
Gustavo Aparicio-Mauricio et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Non-Darcian flow of shear-thinning fluids through packed beads: Experiments and predictions using Forchheimer's law and Ergun's equation
Antonio Rodriguez de Castro et al.
ADVANCES IN WATER RESOURCES (2017)
An analytical Ergun-type equation for porous foams
S. Woudberg et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Study of flow through a packed bed using discrete element method and computational fluid dynamics
Rahul Mohanty et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2016)
Computational study of fluid flow and heat transfer in composite packed beds of spheres with low tube to particle diameter ratio
Jian Yang et al.
NUCLEAR ENGINEERING AND DESIGN (2016)
Modeling of oxidative dehydrogenation of ethane to ethylene on a MoVTeNbO/TiO2 catalyst in an industrial-scale packed bed catalytic reactor
Gamaliel Che-Galicia et al.
CHEMICAL ENGINEERING JOURNAL (2015)
Validation of a novel open-source work-flow for the simulation of packed-bed reactors
Gianluca Boccardo et al.
CHEMICAL ENGINEERING JOURNAL (2015)
A revisit of pressure drop-flow rate correlations for packed beds of spheres
Esra Erdim et al.
POWDER TECHNOLOGY (2015)
Investigation of fluid flow properties in open cell foams: Darcy and weak inertia regimes
Prashant Kumar et al.
CHEMICAL ENGINEERING SCIENCE (2014)
Experimental flow in various porous media and reconciliation of Forchheimer and Ergun relations
Nihad Dukhan et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)
Systematic mesh development for 3D CFD simulation of fixed beds: Contact points study
Anthony G. Dixon et al.
COMPUTERS & CHEMICAL ENGINEERING (2013)
A New Approach to Fixed Bed Radial Heat Transfer Modeling Using Velocity Fields from Computational Fluid Dynamics Simulations
Mohsen Behnam et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)
Performance of iterative equation solvers for mass transfer problems in three-dimensional sphere packings in COMSOL
Birgit Stute et al.
SIMULATION MODELLING PRACTICE AND THEORY (2013)
Fixed bed catalytic reactor modellinguthe radial heat transfer problem
Anthony G. Dixon
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2012)
The role of catalyst activity on the steady state and transient behavior of an industrial-scale fixed bed catalytic reactor for the partial oxidation of o-xylene on V2O5/TiO2 catalysts
C. O. Castillo-Araiza et al.
CHEMICAL ENGINEERING JOURNAL (2011)
Mathematical simulation of radial heat transfer in packed beds by pseudohomogeneous modeling
Rodrigo Bettega et al.
PARTICUOLOGY (2011)
Wall effect on pressure drop in packed beds
Nian-Sheng Cheng
POWDER TECHNOLOGY (2011)
Modeling the Partial Oxidation of o-Xylene in an Industrial Packed-Bed Catalytic Reactor: The Role of Hydrodynamics and Catalyst Activity in the Heat Transport
C. O. Castillo-Araiza et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)
CFD-based analysis of the wall effect on the pressure drop in packed beds with moderate tube/particle diameter ratios in the laminar flow regime
Theodoros Atmakidis et al.
CHEMICAL ENGINEERING JOURNAL (2009)
Analysis of permeability and effective viscosity by CFD on isotropic and anisotropic metallic foams
P. Magnico
CHEMICAL ENGINEERING SCIENCE (2009)
A Coupled DEM and CFD Simulation of Flow Field and Pressure Drop in Fixed Bed Reactor with Randomly Packed Catalyst Particles
Hua Bai et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2009)
Study of the wall effect on particle packing structure using x-ray micro computed tomography
M. Suzuki et al.
ADVANCED POWDER TECHNOLOGY (2008)
Pore-scale derivation of the Ergun equation to enhance its adaptability and generalization
J. Prieur Du Plessis et al.
CHEMICAL ENGINEERING SCIENCE (2008)
3D CFD simulation and experimental validation of particle-to-fluid heat transfer in a randomly packed bed of cylindrical particles
A. H. Ahmadi Motlagh et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2008)
Heat-transfer studies in packed-bed catalytic reactors of low tube/particle diameter ratio
C. O. Castillo-Araiza et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2007)
CFD simulations of hydrodynamic characteristics in a gas-liquid vertical upward slug flow
Donghong Zheng et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2007)
CFD studies on particle-to-fluid mass and heat transfer in packed beds: Free convection effects in supercritical fluids
A. Guardo et al.
CHEMICAL ENGINEERING SCIENCE (2007)
About a correlating equation for predicting pressure drops through packed beds of spheres in a large range of Reynolds numbers
A. Montillet et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2007)
Velocity profile in fixed beds:: A study on the representativeness of the experimental measurement of downstream flow characteristics
Rodrigo Bettega et al.
DRYING TECHNOLOGY (2007)
Analysis of particle porosity distribution in fixed beds using the discrete element method
J. Theuerkauf et al.
POWDER TECHNOLOGY (2006)
Flow through packed bed reactors: 1. Single-phase flow
D Nemec et al.
CHEMICAL ENGINEERING SCIENCE (2005)
A new pseudo-continuous model for the fluid flow in packed beds
B Eisfeld et al.
CHEMICAL ENGINEERING SCIENCE (2005)
Voidage variation in packed beds at small column to particle diameter ratio
A de Klerk
AICHE JOURNAL (2003)
Numerical simulations of single phase reacting flows in randomly packed fixed-bed reactors and experimental validation
H Freund et al.
CHEMICAL ENGINEERING SCIENCE (2003)
A numerical study of the interactions between viscous flow, transport and kinetics in fixed bed reactors
HA Jakobsen et al.
COMPUTERS & CHEMICAL ENGINEERING (2002)
CFD as a design tool for fixed-bed reactors
AG Dixon et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2001)
The influence of confining walls on the pressure drop in packed beds
B Eisfeld et al.
CHEMICAL ENGINEERING SCIENCE (2001)
Mechanisms of catalyst deactivation
CH Bartholomew
APPLIED CATALYSIS A-GENERAL (2001)
Comparison of CFD simulations to experiment for convective heat transfer in a gas-solid fixed bed
M Nijemeisland et al.
CHEMICAL ENGINEERING JOURNAL (2001)