4.7 Article

Manipulating free-standing, flexible and scalable microfiber carbon papers unlocking ultra-high initial Coulombic efficiency and storage sodium behavior

Related references

Note: Only part of the references are listed.
Review Chemistry, Physical

Materials Design for High-Safety Sodium-Ion Battery

Chao Yang et al.

Summary: Sodium-ion batteries are gaining attention for their resource abundance and cost advantages, but safety is crucial, especially for large-scale applications. Thermal energy generated in typical batteries is the main cause of thermal abuse, highlighting the need for further research on improving battery safety.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

MgO-Template Synthesis of Extremely High Capacity Hard Carbon for Na-Ion Battery

Azusa Kamiyama et al.

Summary: High-capacity hard carbon with a reversible capacity of 478 mAh g(-1) is successfully synthesized using MgO-template technique, with nanostructures and synthetic conditions optimized to maximize Na storage properties. Leaching of MgO and carbonization at high temperature result in a large reversible capacity and high Coulombic efficiency of 88% in the first cycle.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Engineering, Environmental

Tuning microstructures of hard carbon for high capacity and rate sodium storage

Qianzheng Jin et al.

Summary: Hard carbon materials are favored for use as anodes in sodium ion batteries due to their cost-effectiveness, abundance, and high sodium storage capacity. However, the relationship between microstructures and electrochemical behaviors of hard carbon remains unclear, hindering the rational design and customization of structures and morphologies for optimized sodium storage capacities and rates. This study investigates the effects of microstructural evolution on sodium storage behaviors, showing that improving ordering degree and increasing surface area can enhance storage performance. An optimized hard carbon product exhibits excellent reversible capacity and cycling stability, providing guidance for designing high-performance sodium ion battery anodes.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Chemistry, Multidisciplinary

Promises and Challenges of Next-Generation Beyond Li-ion Batteries for Electric Vehicles and Grid Decarbonization

Yaosen Tian et al.

Summary: The significant advancements in performance and cost of lithium-ion batteries have made them the preferred technology for electrical energy storage, but they may not meet all the requirements for large-scale applications. Hence, exploration of beyond lithium-ion technologies including sodium-ion batteries, potassium-ion batteries, all-solid-state batteries, and multivalent batteries is accelerating.

CHEMICAL REVIEWS (2021)

Review Chemistry, Physical

Hard Carbon Anodes: Fundamental Understanding and Commercial Perspectives for Na-Ion Batteries beyond Li-Ion and K-Ion Counterparts

Ling-Fei Zhao et al.

Summary: Hard carbon is recognized as a promising anode material for alkali metal-ion batteries, particularly showing outstanding performance in sodium-ion batteries, with in-depth research and commercial prototype demonstration. Challenges and research perspectives for future development and early commercialization of HC-based sodium-ion batteries are also discussed comprehensively.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Influence of Pore Architecture and Chemical Structure on the Sodium Storage in Nitrogen-Doped Hard Carbons

Konstantin Schutjajew et al.

Summary: Hard carbon is the preferred material for sodium ion battery anodes, but understanding the sodium storage mechanisms is still incomplete. Research on nitrogen functionalities and pore geometry reveals that nitrogen content affects sloping capacity, while materials with less nitrogen and more extensive graphene layers have higher plateau capacities.

SMALL (2021)

Article Chemistry, Physical

Carbon Anode Materials: A Detailed Comparison between Na-ion and K-ion Batteries

Lupeng Zhang et al.

Summary: This article discusses the development status and comparative analysis of carbon anode materials for SIBs and PIBs, emphasizing the importance of understanding the storage/release mechanisms of Na+/K+ in carbon materials for achieving ideal performance.

ADVANCED ENERGY MATERIALS (2021)

Review Chemistry, Physical

Boost sodium-ion batteries to commercialization: Strategies to enhance initial Coulombic efficiency of hard carbon anode

Minghao Zhang et al.

Summary: Sodium-ion batteries with hard carbon electrodes have potential for large-scale energy storage due to their low cost and inexhaustible sodium reserves. However, the insufficient initial Coulombic efficiency of hard carbon hinders its practical commercialization, with strategies such as structure modification and electrolyte optimization being effective in improving it.

NANO ENERGY (2021)

Article Chemistry, Physical

High-performance hard carbon anode prepared via an ingenious green-hydrothermal route

Jing Wang et al.

Summary: A eco-friendly phenolic resin was prepared by a hydrothermal synthesis process using glyoxylic acid instead of carcinogenic formaldehyde. By adjusting the carbonization temperature, the obtained hard carbon anode material exhibited high reversible capacity and initial coulombic efficiency.

APPLIED SURFACE SCIENCE (2021)

Article Nanoscience & Nanotechnology

Developing an Interpenetrated Porous and Ultrasuperior Hard-Carbon Anode via a Promising Molten-Salt Evaporation Method

Zhaohua Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Physical

Mechanism of Sodium Storage in Hard Carbon: An X-Ray Scattering Analysis

Yusuke Morikawa et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

Nonignorable Influence of Oxygen in Hard Carbon for Sodium Ion Storage

Chen Chen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Chemistry, Physical

Fabrication of porous Na3V2(PO4)3/reduced graphene oxide hollow spheres with enhanced sodium storage performance

Jingyi Xu et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Article Chemistry, Physical

Ultralow-Concentration Electrolyte for Na-Ion Batteries

Yuqi Li et al.

ACS ENERGY LETTERS (2020)

Article Chemistry, Multidisciplinary

Insights into Lithium and Sodium Storage in Porous Carbon

Gaojing Yang et al.

NANO LETTERS (2020)

Article Chemistry, Multidisciplinary

A Yolk-Shell-Structured FePO4 Cathode for High-Rate and Long-Cycling Sodium-Ion Batteries

Zhuangzhuang Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Editorial Material Chemistry, Multidisciplinary

Introduction: Beyond Li-Ion Battery Chemistry

Y. Shirley Meng

CHEMICAL REVIEWS (2020)

Article Chemistry, Physical

3D carbon-coated MXene architectures with high and ultrafast lithium/sodium-ion storage

Peng Zhang et al.

ENERGY STORAGE MATERIALS (2020)

Article Chemistry, Physical

Surface-dominated storage of heteroatoms-doping hard carbon for sodium-ion batteries

Qianzheng Jin et al.

ENERGY STORAGE MATERIALS (2020)

Article Electrochemistry

Unveiling pseudocapacitive behavior of hard carbon anode materials for sodium-ion batteries

Zoia V. Bobyleva et al.

ELECTROCHIMICA ACTA (2020)

Article Chemistry, Multidisciplinary

Electrolyte-Dependent Sodium Ion Transport Behaviors in Hard Carbon Anode

Min Eui Lee et al.

SMALL (2020)

Article Multidisciplinary Sciences

Rational design of layered oxide materials for sodium-ion batteries

Chenglong Zhao et al.

SCIENCE (2020)

Article Chemistry, Multidisciplinary

A revised mechanistic model for sodium insertion in hard carbons

Heather Au et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Chemistry, Multidisciplinary

A high-energy-density sodium-ion full battery based on tin anode

Mingming Song et al.

SCIENCE CHINA-CHEMISTRY (2019)

Article Chemistry, Multidisciplinary

Hard-Soft Carbon Composite Anodes with Synergistic Sodium Storage Performance

Fei Xie et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Waste Beverage Coffee-Induced Hard Carbon Granules for Sodium-Ion Batteries

Min Eui Lee et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Chemistry, Multidisciplinary

Rapid Sodium-Ion Storage in Hard Carbon Anode Material Derived from Ganoderma lucidum Residue with Inherent Open Channels

Peng-Rong Lu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Chemistry, Multidisciplinary

MXene-Bonded Flexible Hard Carbon Film as Anode for Stable Na/K-Ion Storage

Ning Sun et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Physical

Tuning the Closed Pore Structure of Hard Carbons with the Highest Na Storage Capacity

Qingshi Meng et al.

ACS ENERGY LETTERS (2019)

Review Chemistry, Multidisciplinary

Hard Carbon as Sodium-Ion Battery Anodes: Progress and Challenges

Biwei Xiao et al.

CHEMSUSCHEM (2019)

Article Materials Science, Multidisciplinary

Hard carbons for sodium-ion batteries: Structure, analysis, sustainability, and electrochemistry

Xinwei Dou et al.

MATERIALS TODAY (2019)

Review Chemistry, Physical

Research and development of advanced battery materials in China

Yaxiang Lu et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Physical

A SAXS outlook on disordered carbonaceous materials for electrochemical energy storage

Damien Saurel et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Physical

Defective Hard Carbon Anode for Na-Ion Batteries

Zhifei Li et al.

CHEMISTRY OF MATERIALS (2018)

Review Chemistry, Physical

Sodium and Sodium-Ion Batteries: 50 Years of Research

Claude Delmas

ADVANCED ENERGY MATERIALS (2018)

Article Nanoscience & Nanotechnology

Marriage of an Ether-Based Electrolyte with Hard Carbon Anodes Creates Superior Sodium-Ion Batteries with High Mass Loading

Yongwu He et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Physical

High-Performance Hard Carbon Anode: Tunable Local Structures and Sodium Storage Mechanism

Yu Jin et al.

ACS APPLIED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Long cycle life and high rate sodium-ion chemistry for hard carbon anodes

Panxing Bai et al.

ENERGY STORAGE MATERIALS (2018)

Article Chemistry, Physical

Boosting the rate capability of hard carbon with an ether-based electrolyte for sodium ion batteries

Yuan-En Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Multidisciplinary

Sodium intercalation chemistry in graphite

Haegyeom Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

Article Chemistry, Multidisciplinary

New Mechanistic Insights on Na-Ion Storage in Nongraphitizable Carbon

Clement Bommier et al.

NANO LETTERS (2015)

Article Chemistry, Multidisciplinary

Sodium Storage Behavior in Natural Graphite using Ether-based Electrolyte Systems

Haegyeom Kim et al.

ADVANCED FUNCTIONAL MATERIALS (2015)