4.7 Article

High-temperature CO2 capture by fly ash derived sorbents: Effect of scale-up on sorbents performance

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Performance of a silica-polyethyleneimine adsorbent for post-combustion CO2 capture on a 100 kg scale in a fluidized bed continuous unit

Jae-Young Kim et al.

Summary: The study reported the continuous 150-hour test using silica-PEI on a fluidized bed unit, demonstrating its potential for CO2 capture and evaluating the efficiency and capacity. Results showed over 90% CO2 removal efficiency and 7.5 wt% dynamic sorption capacity achieved during continuous operation.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Molten shell-activated, high-performance, un-doped Li4SiO4 for high-temperature CO2 capture at low CO2 concentrations

Ke Wang et al.

Summary: This study successfully synthesized a highly efficient and pure form of Li4SiO4 using a new method and demonstrated its excellent sorption performance at low CO2 concentrations. The newly synthesized Li4SiO4 sample has a highly porous nano-agglomerate-like structure, allowing for rapid CO2 adsorption.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Wet chemically derived Li4SiO4 nanowires as efficient CO2 sorbents at intermediate temperatures

P. V. Subha et al.

Summary: The compositionally tuned lithium silicate nanowires have been shown to overcome kinetic limitations of CO2 sorption at lower temperatures, resulting in an absorption capacity of 300 mgg(-1) at 450 degrees C, a rare achievement for lithium silicate based materials at such low temperatures. This modification allows for enhanced CO2 capture and the possibility of using modified lithium silicate compositions as CO2 sorbents in industrially significant chemical reaction processes at temperatures ranging from 350-450 degrees C.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Applied

Novel synthesis of tailored Li4SiO4-based microspheres for ultrafast CO2 adsorption

Yuandong Yang et al.

Summary: It has been widely acknowledged that Li4SiO4-based adsorbents with smaller particle size and tailored structure will exhibit superior CO2 capture performance. This study proposed a novel two-phase synthesis method to produce micro-scale Li4SiO4-based adsorbents with ultrafast CO2 capture rate. Experimental results showed that the adsorbent calcined at 600 degrees C exhibited the best morphology, with hollow-structured microspheres with a uniform diameter of 1-2 μm, showing the fastest adsorption rate and highest adsorption capacity.

FUEL PROCESSING TECHNOLOGY (2021)

Article Engineering, Environmental

Li4SiO4-based sorbents from expanded perlite for high-temperature CO2 capture

Shiyi Ni et al.

Summary: In this study, expanded perlite (EP) was used as a silicon source to synthesize Li4SiO4 sorbent. It was found that metal impurities in EP can improve the sorption performance of the sorbent, and adding agar or using organic lithium source can enhance the sorption capacity of the pellets.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Understanding the CO2 chemical reaction path on Li6ZnO4, a new possible high temperature CO2 captor

Xia Zhou et al.

Summary: Li6ZnO4 showed excellent CO2 chemisorption efficiency even at low CO2 partial pressures. The kinetic analysis revealed fast and efficient CO2 carbonation, with a cyclic test demonstrating around 60.0% efficiency after 10 cycles.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Sol-gel derived, Na/K-doped Li4SiO4-based CO2 sorbents with fast kinetics at high temperature

Hongjie Cui et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Tuning Na2ZrO3 for fast and stable CO2 adsorption by solid state synthesis

S. Munro et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Environmental

Li-LSX-zeolite evaluation for post-combustion CO2 capture

Rasmus Kodasma et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Review Biochemistry & Molecular Biology

Performance of Li4SiO4 Material for CO2 Capture: A Review

Xianyao Yan et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)

Article Chemistry, Multidisciplinary

CO2 sorption properties of Li4SiO4 with a Li2ZrO3 coating

L. C. Buelens et al.

JOURNAL OF CO2 UTILIZATION (2019)

Article Energy & Fuels

Pilot testing of enhanced sorbents for calcium looping with cement production

Maria Erans et al.

APPLIED ENERGY (2018)

Article Engineering, Environmental

CO2 sorption/desorption performance study on K2CO3-doped Li4SiO4-based pellets

Maurizia Seggiani et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Engineering, Chemical

Study of Pressure Drop in Fixed Bed Reactor Using a Computational Fluid Dynamics (CFD) Code

Soroush Ahmadi et al.

CHEMENGINEERING (2018)

Article Engineering, Environmental

Kinetics of CO2 adsorption on cherry stone-based carbons in CO2/CH4 separations

N. Alvarez-Gutierrez et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Review Engineering, Environmental

High temperature CO2 sorbents and their application for hydrogen production by sorption enhanced steam reforming process

Marziehossadat Shokrollahi Yancheshmeh et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Article Environmental Sciences

Potassium-based sorbents from fly ash for high-temperature CO2 capture

Aimaro Sanna et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2016)

Article Energy & Fuels

CO2 chemisorption and cyclability analyses in -Li5AlO4: effects of Na2CO3 and K2CO3 addition

M. Teresa Flores-Martinez et al.

GREENHOUSE GASES-SCIENCE AND TECHNOLOGY (2015)

Article Engineering, Chemical

The Applications of Mixed Metal Oxides to Capture the CO2 and Convert to Syn-Gas

Sajan Babhare et al.

BULLETIN OF CHEMICAL REACTION ENGINEERING AND CATALYSIS (2015)

Article Chemistry, Multidisciplinary

Perspective of microporous metal-organic frameworks for CO2 capture and separation

Zhangjing Zhang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Engineering, Multidisciplinary

Transesterification of used cooking oil over alkali metal (Li, Na ,K) supported rice husk silica as potential solid base catalyst

Noor Hindryawati et al.

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2014)

Proceedings Paper Chemistry, Applied

Test Operation Results of the 10 MWe-scale Dry-sorbent CO2 Capture Process Integrated with a Real Coal-fired Power Plant in Korea

Young Cheol Park et al.

12TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-12 (2014)

Proceedings Paper Chemistry, Applied

Novel Na-silicates CO2 sorbents from fly ash

Aimaro Sanna et al.

12TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-12 (2014)

Article Green & Sustainable Science & Technology

Alkali promoted lithium orthosilicate for CO2 capture at high temperature and low concentration

M. Seggiani et al.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2013)

Review Thermodynamics

Capturing CO2 in flue gas from fossil fuel-fired power plants using dry regenerable alkali metal-based sorbent

Chuanwen Zhao et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2013)

Article Engineering, Chemical

Carbonation and Active-Component-Distribution Behaviors of Several Potassium-Based Sorbents

Chuanwen Zhao et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2011)

Article Green & Sustainable Science & Technology

High-temperature and low concentration CO2 sorption on Li4SiO4 based sorbents: Study of the used silica and doping method effects

M. Seggiani et al.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2011)

Review Materials Science, Multidisciplinary

Review: liquid phase sintering

Randall M. German et al.

JOURNAL OF MATERIALS SCIENCE (2009)

Article Chemistry, Multidisciplinary

Novel carbon dioxide solid acceptors using sodium containing oxides

A López-Ortiz et al.

SEPARATION SCIENCE AND TECHNOLOGY (2004)

Article Engineering, Chemical

Kinetics of carbon dioxide sorption on potassium-doped lithium zirconate

RT Xiong et al.

CHEMICAL ENGINEERING SCIENCE (2003)

Article Engineering, Environmental

Mechanism of high-temperature CO2 sorption on lithium zirconate

J Ida et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2003)

Article Materials Science, Multidisciplinary

Carbon dioxide absorption by lithium orthosilicate in a wide range of temperature and carbon dioxide concentrations

M Kato et al.

JOURNAL OF MATERIALS SCIENCE LETTERS (2002)

Article Engineering, Environmental

What future for carbon capture and sequestration?

H Herzog

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2001)