☆ 4.7 Article

An effective heat dissipation strategy improving efficiency and thermal stability of phosphor-in-glass for high-power WLEDs

CERAMICS INTERNATIONAL (2022)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Chromaticity-tunable remote LuYAG: Ce phosphor-in-glass film on regular textured glass substrate for white light emitting diodes

Guoying Zhao et al.

Summary: The fabrication method of embedding (Lu, Y)(3)Al5O12: Ce3+ (LuYAG: Ce) phosphors in borosilicate glass film was reported, which showed tunable broadband emission from green to yellow region with excellent thermal stability by adjusting the molar concentration of Y3+ ions. The SEM images revealed homogeneously distributed phosphor particles within the glass matrix, and the constructed WLEDs achieved a consistent color temperature and high color rendering index.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Synthesis and luminescence properties of color-tunable Ce, Mn co-doped LuAG transparent ceramics by sintering under atmospheric pressure

Chenyao Zhao et al.

Summary: Transparent ceramics Lu3-x-yCexMnyAl5-ySiyO12 were prepared through high-temperature solid-state reaction under a flowing O-2 atmosphere and exhibited excellent optical transmittance and luminescent properties. The color-tunable Ce, Mn co-doped LuAG transparent ceramics showed promising potential as candidates for white LEDs due to their outstanding luminescence thermal stability and efficient energy transfer.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

Fabrication of stacked color converter for high-power WLEDs with ultra-high color rendering

Yang Peng et al.

Summary: A stacked color converter consisting of red CASN PiS layer and green YAGG PiG layer was fabricated for high-power WLEDs to achieve high color rendering. The converter exhibits broad emission and pure white light output, with stable color quality maintained under various driving currents by adjusting the PiS layer thickness.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Phosphor in glass using β-SiAlON:Eu2+, CaAlSiN3:Eu2+ and Nd-doped silicate glass for enhanced color gamut of white LED

Yoon Hee Nam et al.

Summary: This study focuses on the fabrication of a robust white LED using phosphor-in-glass technology, which achieved white light emission by utilizing green and red phosphors as well as Nd2O3 doped silicate glass. It was found that a white LED with 5% Nd2O3 doped glass had an enhanced color gamut up to 88%.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Ceramics

A new BaAl2O4-YAG: Ce composite ceramic phosphor for white LEDs and LDs lighting

Yanna Tian et al.

Summary: BaAl2O4-YAG: Ce composite ceramic phosphor shows excellent luminescent performances with great application potential in high brightness white LEDs/LDs lighting.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Chemistry, Physical

Phosphor-in-glass with full-visible-spectrum emission based on ultra-low melting Sn-F-P-O glass pumped by NUV LED chips

Run Wang et al.

Summary: In this study, phosphor-in-glass (PiG) with full-visible-spectrum emission was successfully fabricated using a one-step sintering method. The Sn2+ ions exhibit intense blue-green emission characteristics under NUV excitation, and embedding phosphors can enhance their PL intensity.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Optics

Phosphor-in-glass (PIG) converter sintered by a fast Joule heating process for high-power laser-driven white lighting

Yifu Liang et al.

Summary: This study utilized a simple, fast, and high temperature Joule heating process to fabricate phosphor-in-glass blocks, significantly improving production efficiency. The optimized PIG converter demonstrated high and robust luminous efficacy, as well as good temperature management under high power.

OPTICS EXPRESS (2021)

Add to Collection

Article Engineering, Environmental

Designed glass frames full color in white light-emitting diodes and laser diodes lighting

Haisheng Yang et al.

Summary: Phosphor-in-glass (PiGs) is a key strategy to address thermal issues in high-power white light-emitting diodes and laser diodes. By carefully designing the glass composition and fabricating at a relatively low temperature, high internal quantum efficiency and luminous efficacy have been achieved.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Reliable and Efficient Phosphor-in-Glass-Based Chip-Scale Packaging for High-Power White LEDs

Xiwen Zhang et al.

Summary: The paper introduces a CSP technology based on phosphor-in-glass (PiG) for high-power WLEDs, and optimizes the optical performance by adjusting the film thickness of PiG. The PiG-CSP technology exhibits higher luminous efficiency and lower correlated color temperature compared to traditional PiS-CSP technology.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2021)

Add to Collection

Article Materials Science, Ceramics

High color rendering index composite phosphor-in-glass for high-power white laser lighting

Yujie Zhang et al.

Summary: The study demonstrates that tunable warm white light-emitting diodes with high internal quantum efficiency and luminous efficiency can be achieved by adjusting sample thickness and phosphor content. The constructed LuAG&CASN-PiG converted LDs with a heat sink exhibit high-quality white light, showing potential for solid-state laser light sources.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Composition and structure design of three-layered composite phosphors for high color rendering chip-on-board light-emitting diode devices

Xin Liu et al.

Summary: The study demonstrates that a WLED designed with a three-layered phosphor structure of red+cyan+yellow emits neutral white light, achieves high luminous efficacy, and exhibits good color performance, making it a promising candidate for achieving high color rendering lighting.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Materials Science, Ceramics

Efficient spectral regulation in Ce:Lu3(Al,Cr)5O12 and Ce:Lu3(Al,Cr)5O12/Ce:Y3Al5O12 transparent ceramics with high color rendering index for high-power white LEDs/LDs

Tianyuan Zhou et al.

Summary: Ce,Cr:LuAG TCs achieved efficient spectral regulation through Cr3+ doping, enhancing their luminescence properties in white LED/LD applications. By combining with other materials, such as 0.5 at% Ce:YAG TC, even better results were obtained in terms of CRI values for TC based white LEDs and LDs.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Highly efficient and thermally robust cyan-green phosphor-in-glass films for high-brightness laser lighting

Huajun Wu et al.

Summary: Laser-driven white lighting with high-brightness, efficiency, and compact size has gained attention, but suffers from low color rendering due to a wide Cyan cavity. A novel cyan-green color converter, CSS-PiG film, with added Na+ improves internal quantum efficiency and achieves efficient cyan-green emission with excellent thermal stability. When combined with a red-emitting layer, the composite film shows ultra-broadband emission, improving color rendering to above 90, making it a promising candidate for laser lighting.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Article Chemistry, Multidisciplinary

YAG:Ce3+ Transparent Ceramic Phosphors Brighten the Next-Generation Laser-Driven Lighting

Qi Yao et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Materials Science, Ceramics

Red-emitting YAG: Ce, Mn transparent ceramics for warm WLEDs application

Junrong Ling et al.

JOURNAL OF ADVANCED CERAMICS (2020)

Add to Collection

Article Materials Science, Ceramics

Comparative study of Al2O3-YAG:Ce composite ceramic and single crystal YAG:Ce phosphors for high-power laser lighting

Jian Xu et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Multidisciplinary Sciences

Highly efficient phosphor-glass composites by pressureless sintering

Dao Zhang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Engineering, Environmental

A high quantum efficiency CaAlSiN3:Eu2+ phosphor-in-glass with excellent optical performance for white light-emitting diodes and blue laser diodes

Yujie Zhang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Realizing high-brightness and ultra-wide-color-gamut laser-driven backlighting by using laminated phosphor-in-glass (PiG) films

Le Wang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Article Materials Science, Ceramics

Facile preparation and optical properties of Te/Pb-free Y3AlO2:Ce3+ phosphor-in-glass via a screen-printing route for high-power WLEDs

Libin Xia et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Optics

LED-based fiber quantum key distribution: toward low-cost applications

Xiu-Xiu Xia et al.

PHOTONICS RESEARCH (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Protected-annealing regulated defects to improve optical properties and luminescence performance of Ce:YAG transparent ceramics for white LEDs

Bingheng Sun et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Unique Color Converter Architecture Enabling Phosphor-in-Glass (PiG) Films Suitable for High-Power and High-Luminance Laser-Driven White Lighting

Peng Zheng et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Materials Science, Ceramics

Stable and efficient all-inorganic color converter based on phosphor in tellurite glass for next-generation laser-excited white lighting

Yang Peng et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)

Add to Collection

Article Chemistry, Physical

A robust red-emitting phosphor-in-glass (PiG) for use in white lighting sources pumped by blue laser diodes

Qiang-Qiang Zhu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Add to Collection

Article Optics

Strong thermal stability of Lu3Al5O12:Ce3+ single crystal phosphor for laser lighting

T. W. Kang et al.

JOURNAL OF LUMINESCENCE (2017)

Add to Collection

Article Materials Science, Ceramics

Phosphor-in-glass thick film formation with low sintering temperature phosphosilicate glass for robust white LED

Sang Hyun Ahn et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Eu3+-Doped Phosphor-in-Glass: A Route toward Tunable Multicolor Materials for Near-UV High-Power Warm-White LEDs

Jiankun Deng et al.

ADVANCED OPTICAL MATERIALS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

All-Inorganic Light Convertor Based on Phosphor-in-Glass Engineering for Next-Generation Modular High-Brightness White LEDs/LDs

Xuejie Zhang et al.

ACS PHOTONICS (2017)

Add to Collection

Article Materials Science, Ceramics

Transparent YAG:Ce ceramics for WLEDs with high CRI: Ce3+ concentration and sample thickness effects

Song Hu et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Chemistry, Physical

A Comparison on Ce3+ Luminescence in Borate Glass and YAG Ceramic: Understanding the Role of Host's Characteristics

Atul D. Sontakke et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and luminescence properties of a H2 annealed Mn-doped Y3Al5O12:Ce3+ single crystal for WLEDs

Guorui Gu et al.

CRYSTENGCOMM (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Facile synthesis of a thermally stable Ce3+:Y3Al5O12 phosphor-in-glass for white LEDs

Jun Huang et al.

CRYSTENGCOMM (2015)

Add to Collection

Article Materials Science, Multidisciplinary

beta-Sialon:Eu phosphor-in-glass: a robust green color converter for high power blue laser lighting

Qiang-Qiang Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Temperature dependence of Ce:YAG single-crystal phosphors for high-brightness white LEDs/LDs

Stelian Arjoca et al.

MATERIALS RESEARCH EXPRESS (2015)

Add to Collection

© Peeref 2019-2024. All rights reserved.