☆ 4.7 Article

First-principles investigation of oxidation mechanism of Al-doped Mo5Si3 silicide

CERAMICS INTERNATIONAL (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

New insight into the structural, mechanical, electronic, and thermodynamic properties of the monoclinic TMAl3-type aluminides

Yong Pan

Summary: This study predicts and investigates the structure, elastic, electronic, and thermodynamic properties of five novel monoclinic TMAl3 aluminides using first-principles calculations, revealing that some of the alloys exhibit high hardness and stability.

INTERNATIONAL JOURNAL OF QUANTUM CHEMISTRY (2022)

Add to Collection

Article Physics, Condensed Matter

First-principles study on the elasticity and thermal properties of heavy Fermi compounds CePtSix (X=1,2,3)

Zhuangzhuang Kong et al.

Summary: In this study, the elastic constants, elastic anisotropy, and thermal properties of heavy Fermi compound CePtSix were computed using density functional theory. The Vickers hardness was calculated using a theoretical model and the elastic anisotropy ranking was determined through a 3D surface construction. CePtSi3 was found to have the strongest bond strength and highest thermal conductivity based on the sequence of Debye temperature.

PHYSICA B-CONDENSED MATTER (2022)

Add to Collection

Article Materials Science, Multidisciplinary

New insight into the structural stability, ductility and melting point of Mo5SiB2 under high-pressure environment

Delin Pu et al.

Summary: This study investigates the influence of high pressure on the structural stability, mechanical properties, and melting point of Mo5SiB2 using first-principles calculations. The results show that all Mo5SiB2 phases are thermodynamically stable and pressure significantly increases ductility and melting point. Additionally, pressure can adjust the localized hybridization between Mo, Si, and B atoms in Mo5SiB2.

VACUUM (2022)

Add to Collection

Article Materials Science, Ceramics

Influence of high pressure on the structure, hardness and brittle-to-ductile transition of NbSi2 ceramics

D. L. Pu et al.

Summary: This study applies first-principles calculations to investigate the impact of pressure on the properties of NbSi2. It is found that increasing pressure results in higher hardness and elastic modulus of NbSi2, as well as induces a transition from brittleness to ductility in different phases. The enhancement of mechanical properties is attributed to the increased electronic hybridization between Nb and Si under pressure, demonstrated by chemical bonding interactions.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Chemistry, Physical

Sulfur vacancy enhances the electronic and optical properties of FeS2 as the high performance electrode material

Yong Pan et al.

Summary: FeS2 disulfide is a promising electrode material for sodium ion batteries. The introduction of sulfur vacancies in FeS2 improves electronic transfer and optical properties, with cubic FeS2 showing better stability. S vacancies enhance the electrical jump and catalytic activity of FeS2, making it an effective method to improve the performance of FeS2 electrode material.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

First-principles calculations on the adhesion strength, fracture mechanism, interfacial bonding of the semi-coherent Al(111)/Al3BC(0001) interfaces

Mingjun Peng et al.

Summary: The study systematically explored the atomic structure, adhesion work, interfacial energy, and fracture mechanism of the semi-coherent Al(111)/Al3BC(0001) interface using first-principles calculations. It was found that the B-terminated Al(111)/Al3BC(0001) interface in HCP2 configuration exhibits the highest adhesion work and lowest interfacial energy, indicating its stability. The formation of strong Al-B covalent bonds at the interface ultimately leads to mechanical failure in the Al slab at the B-HCP2 interface.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Influence of transition metal on the mechanical and electronic properties of RuB2 from first-principles calculations

Yong Pan

Summary: The research demonstrates that transition metals doping can enhance the hardness and various mechanical properties of RuB2, mainly due to the hybridization effect between transition metals and RuB2 atoms.

CHEMICAL PHYSICS LETTERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A first-principles investigation of interfacial properties and electronic structure of SiO2/Al interface

Wenlong Zhang et al.

Summary: The structural, adhesive and electronic properties of a SiO2/Al interface were investigated via first-principles calculations. The most stable SiO2 (0001) surface was terminated with two oxygen atoms, and the most stable SiO2/Al interface was at the hollow site with the smallest interfacial energy and largest work of adhesion. Electronic structure investigations showed polar covalent bonding at the SiO2/Al interface, attributed to the interaction between s and p orbitals of O atoms and p orbitals of Al atoms. The study provides valuable data for the design and multi-scale simulations of oxidized-SiC reinforced aluminum matrix composites.

COMPUTATIONAL MATERIALS SCIENCE (2021)

Add to Collection

Article Engineering, Electrical & Electronic

The influence of Ag and Cu on the electronic and optical properties of ZrO from first-principles calculations

Yong Pan

Summary: The structural, electronic and optical properties of ZrO were studied, showing better thermodynamic stability and electronic properties compared to ZrO2, as well as strong ultraviolet behavior. The addition of Ag and Cu improved the electronic jump between bands and the storage optical properties.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Cr2O3 Content on Microstructure and Mechanical Properties of Al2O3 Matrix Composites

Kunkun Cui et al.

Summary: Al2O3-Cr2O3 refractories are solid solutions that can resist slag erosion effectively. The introduction of Cr2O3 in the composite material leads to decreased compactness and mechanical properties, as well as reduced thermal shock resistance. A Cr2O3 content of 20-30% in the composite refractory can meet the requirements for smelting reduction iron making kiln lining.

COATINGS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Insight into the Mechanical Properties and Fracture Behavior of Pt3Al Coating by Experiment and Theoretical Simulation

Yong Pan

Summary: The polycrystalline Pt3Al coating prepared by the arc-melting method exhibits lamellar cleavage fracture with a measured fracture strength of 449.5 MPa. The theoretical investigation and MD simulation show that the cleavage fracture of Pt3Al is attributed to atomic cluster and thermal activation, respectively. This indicates a close correlation between experimental and theoretical results in understanding the fracture mechanism of Pt3Al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Evolution of surface morphology, roughness and texture of tungsten disilicide coatings on tungsten substrate

Yingyi Zhang et al.

Summary: The hot dip silicon-plating method is a promising surface coating technology, but the correlation between process parameters and properties of WSi2 coatings is not entirely clear. SEM, TEM, AFM, and EBSD methods were used to study the evolution behavior of surface and interface morphologies, roughness, and texture of tungsten disilicide coatings. The results showed that the surface morphologies and roughness were influenced by deposition time, and the orientation of WSi2 grains was biased towards (100) and (110) crystal planes due to the vigorous bombardment of high-energy Si ions.

VACUUM (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of noble metals on the electronic and optical properties of the monoclinic ZrO2: A first-principles study

Yong Pan et al.

Summary: The study found that noble metal doping can improve the electronic properties of monoclinic ZrO2, but it also leads to a reduction in the band gap.

VACUUM (2021)

Add to Collection

Article Chemistry, Physical

Role of hydrogen on the structural stability, mechanical and thermodynamic properties of the cubic TM3Si silicides

Yong Pan

Summary: This study investigates the influence of hydrogen on the TM3Si silicides using first-principles calculations, revealing its effects on the structural stability, mechanical properties, and thermodynamic properties of the materials.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Influence of noble metals on the electronic and optical properties of LiH hydride: First-principles calculations

Ende Yu et al.

Summary: In this study using first-principles calculations, it was found that noble metals have thermodynamic stability in LiH hydride, with Pt-doped LiH showing dynamical stability. The introduction of noble metals improves electronic transfer performance of LiH and eliminates the band gap when H-1s state is induced to the Fermi level. Additionally, Pt doping enhances the optical activity of LiH for visible and infrared light.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Prediction the structure, mechanical properties and melting point of D8m-Mo5SiB2 and Cmcm-Mo5SiB2

Delin Pu et al.

Summary: In this study, two possible phases of Mo5SiB2 were predicted using first principles method, and their structural stability, mechanical properties, melting point, and electronic structure were studied. The results show that both phases are stable, have high melting points, and exhibit metallic behavior.

INTERNATIONAL JOURNAL OF QUANTUM CHEMISTRY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

First-Principles Investigation of the Structural, Mechanical, and Thermodynamic Properties of Hexagonal and Cubic MoAl5 Alloy

Yong Pan

Summary: In this study, the structural stability, elastic and thermodynamic properties of MoAl5 were investigated using first-principles calculations. It was found that the hexagonal phase of MoAl5 exhibits superior mechanical properties compared to the cubic phase, attributed to the strong localized hybridization between Mo and Al. The high temperature thermodynamic properties of MoAl5 were related to the vibration of Al atom and Al-Mo bond, as indicated by density of state and chemical bonding analysis.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The influence of N-vacancy on the electronic and optical properties of bulk InN nitrides

Yong Pan

Summary: The study reveals that N-vacancy in bulk InN is thermodynamically stable, affecting its optical and electronic properties and leading to changes in band gaps and metallic behavior.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2021)

Add to Collection

Article Physics, Condensed Matter

First-principles investigation of structural stability, mechanical and thermodynamic properties of Pt3Zr5 compounds

Yong Pan et al.

Summary: Pt3Zr5 has four thermodynamically stable structures, with the hexagonal phase being the most stable. The tetragonal structure exhibits stronger bulk deformation resistance, while the hexagonal structure shows higher elastic stiffness and shear deformation resistance. The high mechanical properties of Pt3Zr5 are attributed to the strong cohesive force between the Pt and Zr layers.

PHYSICA B-CONDENSED MATTER (2021)

Add to Collection

Article Materials Science, Ceramics

The structure and stability of the low-index surfaces of D8m-Mo5Si3 by first-principles calculations

S. Gu et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of welding speed on microstructure and corrosion resistance of Al-Li alloy weld joint

Mei Yang et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2020)

Add to Collection

Article Materials Science, Ceramics

First-principles investigation of oxidation behavior of Mo5SiB2

Yong Pan et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Influence of Vacancy on the Mechanical, Electronic and Thermodynamic Properties of Mo5SiB2 from First-Principles Calculations

Yong Pan et al.

JOURNAL OF ELECTRONIC MATERIALS (2020)

Add to Collection

Article Electrochemistry

Effect of Laser Power on Corrosion Properties of Hybrid Welded 2195 Al-Li Alloy

Mei Yang et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2020)

Add to Collection

Article Energy & Fuels

Exploring the novel structure, transportable capacity and thermodynamic properties of TiH2 hydrogen storage material

Yong Pan et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Add to Collection

Article Chemistry, Physical

First-principles investigation of phonon dynamics and electrochemical performance of TiO2-x oxides lithium-ion batteries

Yong Pan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Adjusting the correlation between the oxidation resistance and mechanical properties of Pt-based thermal barrier coating

Yong Pan et al.

VACUUM (2020)

Add to Collection

Article Electrochemistry

Effect of Er on the Characteristics of an Oxide Coating Prepared by Micro-Arc Oxidation on a 7075 Aluminum Alloy

XianJu Zhang et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

The hydrogenation mechanism of PtAl and IrAl thermal barrier coatings from first-principles investigations

Y. Pan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Influence of alloying elements on the mechanical and thermodynamic properties of ZrB12 ceramics from first-principles calculations

Yong Pan et al.

INTERNATIONAL JOURNAL OF QUANTUM CHEMISTRY (2020)

Add to Collection

Article Biochemical Research Methods

A first principles investigation on the influence of transition-metal elements on the structural, mechanical, and anisotropic properties of CaM2Al20 intermetallics

Xudong Zhang et al.

JOURNAL OF MOLECULAR GRAPHICS & MODELLING (2020)

Add to Collection

Article Materials Science, Coatings & Films

Investigation of morphology and texture properties of WSi2 coatings on W substrate based on contact-mode AFM and EBSD

Yingyi Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of transition metal on the mechanical and thermodynamic properties of IrAl thermal barrier coating

Yong Pan et al.

VACUUM (2020)

Add to Collection

Article Materials Science, Ceramics

Influence of alloying elements on the structural stability, elastic, hardness and thermodynamic properties of Mo5SiB2 from first-principles calculations

Yong Pan et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Structural Stability and Electronic and Optical Properties of Bulk WS2from First-Principles Investigations

Shuang Chen et al.

JOURNAL OF ELECTRONIC MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Origin of the antioxidation mechanism of RuAl(110) surface from first-principles calculations

Y. Pan et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Substrate temperature induced physical property variation of InxAl1-xN alloys prepared on Al2O3 by magnetron sputtering

Yijian Zhou et al.

VACUUM (2020)

Add to Collection

Article Materials Science, Multidisciplinary

The structural, mechanical and thermodynamic properties of the orthorhombic TMA1 (TM=Ti, Y, Zr and Hf) aluminides from first-principles calculations

Yong Pan

VACUUM (2020)

Add to Collection

Article Materials Science, Ceramics

Insight into the structures, melting points, and mechanical properties of NbSi2 from first-principles calculations

Shuang-Lun Wang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of Al and Cr elements on the oxidation resistance of MoSi2 via first-principles calculation

Liwu Jiang et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Coatings & Films

Anti-wear titanium carbide coating on low-carbon steel by thermo-reactive diffusion

Jin Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Electrochemistry

Corrosion and Electrochemical Impedance Properties of Ti6Al4V Alloy and Ti-3Zr-2Sn-3Mo-25Nb Alloy Treated by Micro-arc Oxidation Process

Mei Yang et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of process parameters and rare earth content on the properties of niobium carbide coatings synthesized by pack cementation

Shuai Li et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Role of Zr in strengthening MoSi2 from density functional theory calculations

Hui Zheng et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Ceramics

First-principles investigation of new structure, mechanical and electronic properties of Mo-based silicides

Yong Pan et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Physical

First-principles study of the effect of Cr and Al on the oxidation resistance of WSi2

Shuanglun Wang et al.

CHEMICAL PHYSICS LETTERS (2018)

Add to Collection

Article Materials Science, Ceramics

Insight into the oxidation mechanism of MoSi2: Ab-initio calculations

Yong Pan et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Insight into the oxidation mechanism of Nb3Si(111) surface: First-principles calculations

Yong Pan et al.

MATERIALS RESEARCH BULLETIN (2018)

Add to Collection

Article Electrochemistry

Effects of duty ratio on properties of micro-arc film on Ti-3Zr-2Sn-3Mo-25Nb

Mei Yang et al.

TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Ti addition on the thermal expansion anisotropy of Mo5Si3

M. A. Azim et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Chemistry, Physical

Influence of siliconizing on the oxidation behavior of plasma sprayed MoSi2 coating for niobium based alloy

Jia Sun et al.

INTERMETALLICS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

A comparison of the effect of Cr and Al additions on the oxidation behaviour of alloys from the Nb-Cr-Si system

N. Esparza et al.

MATERIALS AT HIGH TEMPERATURES (2016)

Add to Collection

Article Chemistry, Physical

Effects of ternary additions on the microstructure and thermal stability of directionally-solidified MoSi2/Mo5Si3 eutectic composites

Kosuke Fujiwara et al.

INTERMETALLICS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure, mechanical properties and oxidation resistance of Mo5Si3-Al2O3 composite

Hui Chen et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Phonon-limited mobility in n-type single-layer MoS2 from first principles

Kristen Kaasbjerg et al.

PHYSICAL REVIEW B (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Oxidation performance of Mo3Si with Al additions

I. Rosales et al.

CORROSION SCIENCE (2009)

Add to Collection

Article Nanoscience & Nanotechnology

Oxidation behavior and effect of oxidation on mechanical properties of Mo5Si3 particle-reinforced Si3N4 composites

T Iizuka et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Add to Collection

Article Physics, Condensed Matter

First-principles simulation: ideas, illustrations and the CASTEP code

MD Segall et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2002)

Add to Collection

Article Nanoscience & Nanotechnology

Processing of single phase Mo5Si3 by microwave activated combustion synthesis

JR Jokisaari et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.