Related references
Note: Only part of the references are listed.Fabrication and characterization of non-foamed and foamed geopolymers from industrial waste clays
M. F. Zawrah et al.
CERAMICS INTERNATIONAL (2021)
Cellular ceramic foam derived from potassium-based geopolymer composite: Thermal, mechanical and structural properties
Tomas Kovarik et al.
MATERIALS & DESIGN (2021)
Role of Sintering Temperature in Production of Nepheline Ceramics-Based Geopolymer with Addition of Ultra-High Molecular Weight Polyethylene
Romisuhani Ahmad et al.
MATERIALS (2021)
Physico-mechanical performance of lightweight geopolymer foam aggregates developed by geopolymerization through microwave-oven irradiations
Sadia Hanif et al.
Journal of King Saud University, Engineering Sciences (2021)
Physico-mechanical performance and durability of artificial lightweight aggregates synthesized by cementing and geopolymerization
Munib Ul Rehman et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
In-situ formation of geopolymer foams through addition of silica fume: Preparation and sinterability
S. E. Abo Sawan et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Effect of nano sand on the properties of metakaolin-based geopolymer: Study on its low rate sintering
M. F. Zawrah et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Fabrication, sinterabilty and characterization of non-colored and colored geopolymers with improved properties
S. E. Abo Sawan et al.
MATERIALS RESEARCH EXPRESS (2019)
A critical review of geopolymer properties for structural fire-resistance applications
Mukund Lahoti et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Fire-resistant geopolymer bricks synthesized from high-calcium fly ash with outdoor heat exposure
Prinya Chindaprasirt et al.
CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2018)
Thermal and structural micro analysis of micro silica blended fly ash based geopolymer composites
M. Sivasakthi et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)
Microstructure and thermal conductivity of cement-based foam: A review
Farnaz Batool et al.
JOURNAL OF BUILDING ENGINEERING (2018)
A huge number of artificial waste material can be supplementary cementitious material (SCM) for concrete production - a review part II
Evi S. Aprianti
JOURNAL OF CLEANER PRODUCTION (2017)
An investigation on alkali-activated Egyptian metakaolin pastes blended with quartz powder subjected to elevated temperatures
Alaa M. Rashad et al.
APPLIED CLAY SCIENCE (2016)
Recycling and utilization assessment of waste fired clay bricks (Grog) with granulated blast-furnace slag for geopolymer production
M. F. Zawrah et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2016)
Superplasticizer Addition to Carbon Fly Ash Geopolymers Activated at Room Temperature
Lorenza Carabba et al.
MATERIALS (2016)
Thermal Behaviour of Metakaolin/Fly Ash Geopolymers with Chamotte Aggregate
Pavel Rovnanik et al.
MATERIALS (2016)
Thermal properties of novel binary geopolymers based on metakaolin and alternative silica sources
Monica A. Villaquiran-Caicedo et al.
APPLIED CLAY SCIENCE (2015)
A review on thermophysical evaluation of alkali-activated geopolymers
M. B. Mohd Salahuddin et al.
CERAMICS INTERNATIONAL (2015)
Mechanical behaviour at high temperature of alkali-activated aluminosilicates (geopolymers)
Antonia Martin et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
New synthesis method for the production of coal fly ash-based foamed geopolymers
Nuran Boeke et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Behaviour of Passive Fire Protection K-Geopolymer under Successive Severe Fire Incidents
Konstantinos Sakkas et al.
MATERIALS (2015)
Effect of nano-silica on strength and durability of fly ash based geopolymer mortar
D. Adak et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Influence of sand on the mechanical properties of metakaolin geopolymers
C. Kuenzel et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Potassium based geopolymer for passive fire protection of concrete tunnels linings
K. Sakkas et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2014)
The Characteristics of Metakaolinite-based Geopolymer at Different Temperature
Jieyu Chen et al.
MATERIALS ENGINEERING AND MECHANICAL AUTOMATION (2014)
Effect of nano-SiO2 on the alkali-activated characteristics of metakaolin-based geopolymers
Kang Gao et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Production of nepheline/quartz ceramics from geopolymer mortars
C. Kuenzel et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)
Sintering and technological properties of alumina/zirconia/nano-TiO2 ceramic composites
M. M. S. Wahsh et al.
MATERIALS RESEARCH BULLETIN (2013)
Technical and commercial progress in the adoption of geopolymer cement
Jannie S. J. van Deventer et al.
MINERALS ENGINEERING (2012)
Effects of high-temperature heat treatment on the mechanical properties of unidirectional carbon fiber reinforced geopolymer composites
Peigang He et al.
CERAMICS INTERNATIONAL (2010)
Thermal Character of Geopolymers Synthesized from Class F Fly Ash Containing High Concentrations of Iron and alpha-Quartz
William D. A. Rickard et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2010)
Use of analytical techniques for identification of inorganic polymer gel composition
D. Zaharaki et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Formation of Ceramics from Metakaolin-Based Geopolymers. Part II: K-Based Geopolymer
Jonathan L. Bell et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)
Damage behavior of geopolymer composites exposed to elevated temperatures
Daniel L. Y. Kong et al.
CEMENT & CONCRETE COMPOSITES (2008)
Factors affecting the performance of metakaolin geopolymers exposed to elevated temperatures
Daniel L. Y. Kong et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperatures
Daniel L. Y. Kong et al.
CEMENT AND CONCRETE RESEARCH (2007)
Definitions of terms relating to the structure and processing of sols, gels, networks, and inorganic-organic hybrid materials (IUPAC Recommendations 2007)
J. Aleman et al.
PURE AND APPLIED CHEMISTRY (2007)
Geopolymer technology:: the current state of the art
P. Duxson et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Physical evolution of Na-geopolymer derived from metakaolin up to 1000°C
Peter Duxson et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Effect of zircon additions on low and ultra-low cement alumina and bauxite castables
M. F. Zawrah
CERAMICS INTERNATIONAL (2007)
Synthesis and thermal behavior of inorganic-organic hybrid geopolymer composites
M Hussain et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
Study on concrete at high temperature in China -: an overview
JZ Xiao et al.
FIRE SAFETY JOURNAL (2004)
Thermal behaviour of inorganic geopolymers and composites derived from sodium polysialate
VFF Barbosa et al.
MATERIALS RESEARCH BULLETIN (2003)
Microstructure and mechanical characteristics of laser-alloyed alumina ceramics
MF Zawrah et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Share Paper
