4.7 Review

A review of recent advances in the science and technology of seawater-mixed concrete

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Experimental study of mechanical and fresh properties of HVFA-SCC with and without PP fibers

Lingzhu Zhou et al.

Summary: This paper investigates the mechanical and fresh properties of novel high-volume fly ash-self compacting concretes (HVFA-SCCs) and explores the effects of adding high-volume polypropylene (PP) fibers and seawater on its performance. The results suggest that HVFA-SCC, high-volume PP fibers reinforced HVFA-SCC, seawater and sea-sand HVFA-SCC can be feasibly used in various constructions.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Interactions of sodium chloride solution and calcium silicate hydrate with different calcium to silicon ratios: A molecular dynamics study

Hongyang Deng et al.

Summary: This article investigates the influence of the structure and properties of C-S-H on the durability of concrete, proposing a Ca/Si ratio gradient microstructure design to prevent chloride ion penetration.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Effect of fiber content on mechanical performance and cracking characteristics of ultra-high-performance seawater sea-sand concrete (UHP-SSC)

Bo-Tao Huang et al.

Summary: This study developed a new type of ultra-high-performance seawater sea-sand concrete (UHP-SSC) by using ultra-high-molecular-weight polyethylene fibers to address the challenges of sustainable marine and coastal construction. Experimental results showed that increasing fiber content in UHP-SSC significantly improved tensile strength and strain capacity while slightly decreasing compressive strength. A probabilistic model was successfully used to estimate the allowed tensile strain of UHP-SSC based on crack width and cumulative probability in practical applications.

ADVANCES IN STRUCTURAL ENGINEERING (2021)

Article Construction & Building Technology

Effect of seawater as mixing water on the hydration behaviour of tricalcium aluminate

Yamei Cai et al.

Summary: This study found that seawater delayed the hydration of C3A by contaminating reactive sites on its surface with co-existing Ca2+ and SO42-, as well as prolonging the induction period with precipitation of Mg(OH)2. Cl-was observed to preferentially react with C3A to form Friedel's salt, leading to an accumulation of Al3+ in solution and hindering further dissolution of C3A.

CEMENT AND CONCRETE RESEARCH (2021)

Article Polymer Science

Environmental Impacts of Glass- and Carbon-Fiber-Reinforced Polymer Bar-Reinforced Seawater and Sea Sand Concrete Beams Used in Marine Environments: An LCA Case Study

Shaoce Dong et al.

Summary: This paper conducted a life cycle assessment of constructing three kinds of beams in marine environments, and found that FRP bar-reinforced SWSSC beams have lower environmental impacts compared to common concrete beams, with production stages being the main influencing factor.

POLYMERS (2021)

Article Construction & Building Technology

Seawater sea-sand engineered/strain-hardening cementitious composites (ECC/SHCC): Assessment and modeling of crack characteristics

Bo-Tao Huang et al.

Summary: This study assesses and models the crack characteristics of Seawater sea-sand Engineered Cementitious Composites (SS-ECC), exploring the influence of sea-sand size, fiber length, and fiber dosage. Proposed methods, including a five-dimensional representation and a probabilistic model, facilitate the design of SS-ECC in marine and coastal structures by considering crack characteristics and mechanical properties comprehensively.

CEMENT AND CONCRETE RESEARCH (2021)

Article Engineering, Multidisciplinary

Degradation of epoxy/glass interface in hygrothermal environment: An atomistic investigation

Xing Quan Wang et al.

Summary: Through molecular dynamics simulations, it has been shown that degradation at the glass fiber/matrix interface in hygrothermal environment is mainly due to the decrease in adhesion energy and weakened intermolecular interactions.

COMPOSITES PART B-ENGINEERING (2021)

Article Engineering, Civil

Design of Marine Dock Using Concrete Mixed with Seawater and FRP Bars

Vanessa Benzecry et al.

Summary: This paper discusses the design and reconstruction of a marine dock in Miami, Florida after being damaged by Hurricane Irma in 2017. The innovative structure utilizes accelerated bridge construction methods and sustainable materials to enhance hurricane resistance and resilience.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2021)

Article Construction & Building Technology

Effects of Seawater, NaCl, and Na2SO4 Solution Mixing on Hydration Process of Cement Paste

Weiwen Li et al.

Summary: The use of seawater as mixing water for concrete production has significant effects on hydration, microstructure, and strength development of cement pastes, resulting in a denser cement matrix and enhanced early strength but diminishing enhancement with curing time. Chloride ions in seawater play a dominant role in promoting hydration and crystal growth, while sodium sulfate initially enhances strength but later inhibits strength development.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2021)

Article Construction & Building Technology

Early-age and microstructural properties of glass powder blended cement paste: Improvement by seawater

Jian-Xin Lu et al.

Summary: The study evaluated the effectiveness of using seawater as mixing water in improving the early-age properties of cement pastes/mortars prepared with low-reactive waste glass powder. The results showed that the combination of seawater and waste glass powder enhanced early-age strength by accelerating hydration and refining pore structure, overcoming the dilution effect and prolonged setting time. The incorporation of waste glass powder increased yield stress and plastic viscosity of the cement paste, while seawater further changed the rheological properties by accelerating cement hydration.

CEMENT & CONCRETE COMPOSITES (2021)

Review Construction & Building Technology

Development of sustainable concrete incorporating seawater: A critical review on cement hydration, microstructure and mechanical strength

Peiran Li et al.

Summary: This research reviews the performance differences between seawater-mixed and conventional concretes, highlighting the chloride-induced hydration mechanism in seawater. While additives and curing conditions can mitigate some of the negative effects, the unstable chloride binding ability in cement hydrates limits the practical application of seawater in concrete for the risk of rebar corrosion. Recommendations are made for future applications in the construction industry while emphasizing the importance of carefully considering the trade-offs associated with using seawater in concrete.

CEMENT & CONCRETE COMPOSITES (2021)

Review Construction & Building Technology

A review on seawater sea-sand concrete: Mixture proportion, hydration, microstructure and properties

Yifan Zhao et al.

Summary: This paper reviews the current research status of seawater sea-sand concrete (SSSC) and emphasizes the importance of appropriate material composition for its performance, proposing that better performance can be achieved through optimizing the mixture proportion. In addition, the use of SCMs with high aluminum content can significantly improve the properties of concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Construction & Building Technology

Strength, hydration, and microstructure of seawater sea-sand concrete using high-ferrite Portland cement

Shiwen Han et al.

Summary: The study demonstrates that using high ferrite Portland cement (HFPC) for preparing seawater sea-sand concrete (SWSSC) can effectively enhance the early strength of concrete and address the issues typically encountered by ordinary Portland cement (OPC) in marine environments.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Chemistry, Multidisciplinary

Mechanisms on Accelerating Hydration of Alite Mixed with Inorganic Salts in Seawater and Characteristics of Hydration Products

Yanjie Sun et al.

Summary: This study investigated the hydration of alite, a major clinker phase in Portland cement, in seawater with added common salt solutions. It was found that the addition of salts accelerated the hydration rate of alite, leading to an increase in the formation of C-S-H and portlandite at early ages. Different salts also influenced the morphology and polymerization degree of C-S-H, with gypsum and brucite formed as new hydration products in specific salt systems.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Construction & Building Technology

The durability of seawater sea-sand concrete beams reinforced with metal bars or non-metal bars in the ocean environment

Zhiqiang Dong et al.

ADVANCES IN STRUCTURAL ENGINEERING (2020)

Article Construction & Building Technology

Performance of Seawater-Mixed Recycled-Aggregate Concrete

Adel Younis et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2020)

Article Chemistry, Multidisciplinary

Olive leaf extract as a green corrosion inhibitor of reinforced concrete contaminated with seawater

Marwa Ben Harb et al.

ARABIAN JOURNAL OF CHEMISTRY (2020)

Article Nanoscience & Nanotechnology

The effects of seawater and nanosilica on the performance of blended cements and composites

Pawel Sikora et al.

APPLIED NANOSCIENCE (2020)

Article Construction & Building Technology

Investigation on early-age hydration, mechanical properties and microstructure of seawater sea sand cement mortar

Peiran Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Durability of pultruded GFRP tubes subjected to seawater sea sand concrete and seawater environments

Milad Bazli et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Rheological properties, compressive strength, hydration products and microstructure of seawater-mixed cement pastes

Junjie Wang et al.

CEMENT & CONCRETE COMPOSITES (2020)

Article Construction & Building Technology

High-strength seawater sea-sand Engineered Cementitious Composites (SS-ECC): Mechanical performance and probabilistic modeling

Bo-Tao Huang et al.

CEMENT & CONCRETE COMPOSITES (2020)

Article Engineering, Civil

Durability of Commercially Available GFRP Reinforcement in Seawater-Mixed Concrete under Accelerated Aging Conditions

Morteza Khatibmasjedi et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2020)

Article Materials Science, Composites

Seawater sea-sand Engineered Cementitious Composites (SS-ECC) for marine and coastal applications

Bo-Tao Huang et al.

COMPOSITES COMMUNICATIONS (2020)

Article Construction & Building Technology

Preparation of sea water sea sand high performance concrete (SHPC) and serving performance study in marine environment

Tianyu Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Mechanical and durability performance of marine sand and seawater concrete incorporating silicomanganese slag as coarse aggregate

Matthew Zhi Yeon Ting et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Applicability of seawater as a mixing and curing agent in 4-year-old concrete

Amry Dasar et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Review Construction & Building Technology

A review on durability of fiber reinforced polymer (FRP) bars reinforced seawater sea sand concrete

Azzam Ahmed et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Chemistry, Multidisciplinary

Influence of Seawater on the Morphological Evolution and the Microchemistry of Hydration Products of Tricalcium Silicates (C3S)

Sarah Abduljabbar Yaseen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Proceedings Paper Engineering, Environmental

Flowability of self-compacting concrete containing marine materials and steel fiber

A. Raidyarto et al.

3RD INTERNATIONAL CONFERENCE ON CIVIL AND ENVIRONMENTAL ENGINEERING (ICCEE 2019) (2020)

Article Construction & Building Technology

Modeling early age hydration kinetics and the hydrated phase of cement paste blended with chloride and sulfate

Yuanzhang Cao et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Development and mechanical behaviour of ultra-high-performance seawater sea-sand concrete

Jin-Guang Teng et al.

ADVANCES IN STRUCTURAL ENGINEERING (2019)

Article Construction & Building Technology

Hydration, Pore Solution, and Porosity of Cementitious Pastes Made with Seawater

Luca Montanari et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

Article Construction & Building Technology

New insights from reactivity testing of supplementary cementitious materials

Prannoy Suraneni et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Construction & Building Technology

Mechanical properties of alkali-activated slag concrete mixed by seawater and sea sand

Shutong Yang et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Seawater cement paste: Effects of seawater and roles of water film thickness and superplasticizer dosage

L. G. Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Effect of fly ash on compressive strength and chloride binding of seawater-mixed mortars

Faiz Uddin Ahmed Shaikh et al.

JOURNAL OF SUSTAINABLE CEMENT-BASED MATERIALS (2019)

Review Engineering, Civil

Benefits of using sea sand and seawater in concrete: a comprehensive review

Tanaz Dhondy et al.

AUSTRALIAN JOURNAL OF STRUCTURAL ENGINEERING (2019)

Review Multidisciplinary Sciences

A Review on Modeling Techniques of Cementitious Materials under Different Length Scales: Development and Future Prospects

Xing Quan Wang et al.

ADVANCED THEORY AND SIMULATIONS (2019)

Article Construction & Building Technology

Durability of glass fiber-reinforced polymer bars conditioned in moist seawater-contaminated concrete under sustained load

Hilal El-Hassan et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Life cycle cost analysis of structural concrete using seawater, recycled concrete aggregate, and GFRP reinforcement

Adel Younis et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Review Construction & Building Technology

Effect of mixed chlorides on the degradation and sulfate diffusion of cast-in-situ concrete due to sulfate attack

Gaowen Zhao et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Materials Science, Multidisciplinary

Durability of fiber reinforced polymer (FRP) in simulated seawater sea sand concrete (SWSSC) environment

F. Guo et al.

CORROSION SCIENCE (2018)

Article Construction & Building Technology

Phase Diagram and Volume Change of the Ca(OH)2 CaCl2 H2O System for Varying Ca(OH)2/CaCl2 Molar Ratios

Chunyu Qiao et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)

Article Construction & Building Technology

Fresh and hardened properties of seawater-mixed concrete

Adel Younis et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Effects of seawater and supplementary cementitious materials on the durability and microstructure of lightweight aggregate concrete

Shukai Cheng et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Multiscale investigations on hydration mechanisms in seawater OPC paste

Junjie Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Green & Sustainable Science & Technology

Impacts of booming concrete production on water resources worldwide

Sabbie A. Miller et al.

NATURE SUSTAINABILITY (2018)

Review Construction & Building Technology

Use of sea-sand and seawater in concrete construction: Current status and future opportunities

Jianzhuang Xiao et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Effect of chloride content on mechanical properties of ultra high performance concrete

Sukhoon Pyo et al.

CEMENT & CONCRETE COMPOSITES (2017)

Article Engineering, Multidisciplinary

Molecular dynamics simulations on adhesion of epoxy-silica interface in salt environment

Yohannes L. Yaphary et al.

COMPOSITES PART B-ENGINEERING (2017)

Article Construction & Building Technology

Performance evaluation and microstructural characterization of GFRP bars in seawater-contaminated concrete

Hilal El-Hassan et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Long-term durability of basalt- and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment

Zike Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Construction & Building Technology

Secondary aggregates and seawater employment for sustainable concrete dyke blocks production: Case study

Miren Etxeberria et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Construction & Building Technology

Influence of seawater and blast furnace cement employment on recycled aggregate concretes' properties

Miren Etxeberria et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Multidisciplinary Sciences

Mesoscopic packing of disk-like building blocks in calcium silicate hydrate

Zechuan Yu et al.

SCIENTIFIC REPORTS (2016)

Article Construction & Building Technology

Chloride resistance of concrete with metakaolin addition and seawater mixing: A comparative study

Qiu Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Combined effect of metakaolin and sea water on performance and microstructures of concrete

Zhiguang Shi et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Some Considerations for Applicability of Seawater as Mixing Water in Concrete

Takahiro Nishida et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)

Proceedings Paper Construction & Building Technology

Porosity, pore size and compressive strength of self compacting concrete using sea water

Erniati et al.

CIVIL ENGINEERING INNOVATION FOR A SUSTAINABLE (2015)

Article Geochemistry & Geophysics

Lessons from a lost technology: The secrets of Roman concrete

Jan Elsen et al.

AMERICAN MINERALOGIST (2013)

Article Geochemistry & Geophysics

Unlocking the secrets of Al-tobermorite in Roman seawater concrete

Marie D. Jackson et al.

AMERICAN MINERALOGIST (2013)

Article Materials Science, Multidisciplinary

Characterization of the intrinsic strength between epoxy and silica using a multiscale approach

Denvid Lau et al.

JOURNAL OF MATERIALS RESEARCH (2012)