Related references
Note: Only part of the references are listed.Microstructure and superior mechanical property of in situ (TiBw plus TiCp)/ Ti composites with laminated structure
Hao Wu et al.
CERAMICS INTERNATIONAL (2021)
Controlled Interfacial Reactions and Superior Mechanical Properties of High Energy Ball Milled/Spark Plasma Sintered Ti-6Al-4V-Graphene Composite
Yue Zhou et al.
ADVANCED ENGINEERING MATERIALS (2021)
Interface engineering of graphene/copper matrix composites decorated with tungsten carbide for enhanced physico-mechanical properties
L. L. Dong et al.
CARBON (2021)
In-situ CVD synthesis of Ni@N-CNTs/carbon paper electrode for electro-reduction of CO2
Zhichao Miao et al.
CARBON (2021)
Microstructure and tribological properties of titanium matrix nanocomposites through powder metallurgy using graphene oxide nanosheets enhanced copper powders and spark plasma sintering
N. Tian et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Microstructure and mechanical properties of SiC nanowires reinforced titanium matrix composites
Yue Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effect of nickel addition on densification, microstructure and wear behaviour of spark plasma sintered CP-titanium
Azeez Lawan Rominiyi et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Carbonaceous nanomaterial reinforced Ti-6Al-4V matrix composites: Properties, interfacial structures and strengthening mechanisms
L. L. Dong et al.
CARBON (2020)
Effect of TiB2 addition on the microstructure and wear resistance of Ti-6Al-4V alloy fabricated through direct metal laser sintering (DMLS)
Aniruddha S. Patil et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Nanodiamonds reinforced titanium matrix nanocomposites with network architecture
Faming Zhang et al.
COMPOSITES PART B-ENGINEERING (2019)
Synthesis, microstructural and phase evolution in Ti-2Ni and Ti-10Ni binary alloys consolidated by spark plasma sintering technique
Azeez Lawan Rominiyi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Effect of transition layer on the performance of hydroxyapatite/titanium nitride coating developed on Ti-6Al-4V alloy by magnetron sputtering
Jianwei Qi et al.
CERAMICS INTERNATIONAL (2019)
Microstructure and mechanical properties of selective laser melted Ti-3Al-8V-6Cr-4Zr-4Mo compared to Ti-6Al-4V
C. Madikizela et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Transformation-induced plasticity and high strength in beta titanium alloy manufactured by selective laser melting
Y. J. Liu et al.
MATERIALIA (2019)
Uniform dispersion and interface analysis of nickel coated graphene nanoflakes/pure titanium matrix composites
X. N. Mu et al.
CARBON (2018)
Interface structure and strengthening behavior of graphene/CuCr composites
Ke Chu et al.
CARBON (2018)
Sintering effect on microstructural evolution and mechanical properties of spark plasma sintered Ti matrix composites reinforced by reduced graphene oxides
L. L. Dong et al.
CERAMICS INTERNATIONAL (2018)
Interface and mechanical/thermal properties of graphene/copper composite with Mo2C nanoparticles grown on graphene
Ke Chu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Strength distribution of Ti/SiC metal-matrix composites under monotonic loading
Sivasambu Mahesh et al.
ENGINEERING FRACTURE MECHANICS (2018)
Mechanical property and microstructure evolution of nitrogen-modified Ti-6Al-4V alloy with core-shell structure by hot compression
X. Zhou et al.
MATERIALS CHARACTERIZATION (2018)
Improvement of interfacial interaction and mechanical properties in copper matrix composites reinforced with copper coated carbon nanotubes
Hu Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and mechanical properties of a high-oxygen core-shell network structured Ti6Al4V alloy
Y. S. Zhang et al.
VACUUM (2018)
Graphene defect engineering for optimizing the interface and mechanical properties of graphene/copper composites
Ke Chu et al.
CARBON (2018)
Interdependencies between graphitization of carbon nanotubes and strengthening mechanisms in titanium matrix composites
Khurram S. Munir et al.
MATERIALIA (2018)
Formation of TiCX during reactive spark plasma sintering of mechanically milled Ti/carbon nanotube mixtures
K. Vasanthakumar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Microstructure Microstructure and mechanical property evolutions of bulk core-shell structured Ti-N alloys during annealing
Y. S. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effects of first-scale TiBw on secondary-scale Ti5Si3 characteristics and mechanical properties of in-situ (Ti5Si3d+TiBw)/Ti6A14V composites
Y. Jiao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Microstructure growth behavior and its evolution mechanism during laser additive manufacture of in-situ reinforced (TiB plus TiC)/Ti composite
Mujian Xia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Improving the strengthening efficiency of carbon nanotubes in titanium metal matrix composites
Khurram S. Munir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and mechanical properties of carbon nanotubes reinforced titanium matrix composites fabricated via spark plasma sintering
Khurram S. Munir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
High tensile-strength and ductile titanium matrix composites strengthened by TiB nanowires
Liqing Huang et al.
SCRIPTA MATERIALIA (2017)
Microstructure, mechanical and wear properties of core-shell structural particle reinforced Ti-O alloys
Y. S. Zhang et al.
VACUUM (2017)
Metallurgical Challenges in Carbon Nanotube-Reinforced Metal Matrix Nanocomposites
Abolfazl Azarniya et al.
METALS (2017)
Titanium/nanodiamond nanocomposites: Effect of nanodiamond on microstructure and mechanical properties of titanium
Faming Zhang et al.
MATERIALS & DESIGN (2017)
Simultaneously enhancing the strength, ductility and conductivity of copper matrix composites with graphene nanoribbons
Ming Yang et al.
CARBON (2017)
Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)-reinforced aluminum matrix composites
B. Chen et al.
CARBON (2017)
Role of Process Control Agent in the Synthesis of Multi-Walled Carbon Nanotubes Reinforced Titanium Metal Matrix Powder Mixtures
Khurram S. Munir et al.
ADVANCED ENGINEERING MATERIALS (2016)
Identifying and understanding the effect of milling energy on the synthesis of carbon nanotubes reinforced titanium metal matrix composites
Khurram S. Munir et al.
CARBON (2016)
Pulsed current field assisted surface modification of carbon nanotubes with nanocrystalline titanium carbide
Farhad Saba et al.
CARBON (2016)
Fabrication and characterisation of Titanium Matrix Composites obtained using a combination of Self propagating High temperature Synthesis and Spark Plasma Sintering
M. A. Lagos et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Synthesis and mechanical properties of TiAl particle reinforced Ti-6Al-4V
Sabine Decker et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Simultaneously enhancing strength and ductility of carbon nanotube/aluminum composites by improving bonding conditions
B. Chen et al.
SCRIPTA MATERIALIA (2016)
In Situ Synthesis of (TiC + Ti3SiC2 + Ti5Si3)/Ti6Al4V Composites with Tailored Two-scale Architecture
C. Liu et al.
ADVANCED ENGINEERING MATERIALS (2015)
Strengthening mechanisms in carbon nanotube-reinforced aluminum composites
Jong Gil Park et al.
CARBON (2015)
Rapid and low temperature spark plasma sintering synthesis of novel carbon nanotube reinforced titanium matrix composites
Fu-Chi Wang et al.
CARBON (2015)
Deformation behavior of aluminum alloy matrix composites reinforced with few-layer graphene
S. E. Shin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
A comparison of Ti-Ni and Ti-Sn binary alloys processed using powder metallurgy
Hung-Wei Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Microstructure and mechanical properties of investment casted titanium matrix composites with B4C additions
Jiheng Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Ag/CNT nanocomposites and their single- and double-layer electromagnetic wave absorption properties
Gan Jet Hong Melvin et al.
SYNTHETIC METALS (2015)
Effect of dispersion method on the deterioration, interfacial interactions and re-agglomeration of carbon nanotubes in titanium metal matrix composites
Khurram S. Munir et al.
MATERIALS & DESIGN (2015)
Fabrication of carbon nanotube reinforced iron based magnetic alloy composites by spark plasma sintering
Mahesh Kumar Mani et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
TLP bonding of Ti-6Al-4V and Mg-AZ31 alloys using pure Ni electro-deposited coats
Anas M. Atieh et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Powder metallurgy Ti-TiC metal matrix composites prepared by in situ reactive processing of Ti-VGCFs system
Shufeng Li et al.
CARBON (2013)
Interface analysis of ultra-high strength carbon nanotube/nickel composites processed by molecular level mixing
J. Y. Hwang et al.
CARBON (2013)
Powder metallurgy titanium metal matrix composites reinforced with carbon nanotubes and graphite
Shufeng Li et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Low volume fraction in situ (Ti5Si3 + Ti2C)/Ti hybrid composites with network microstructure fabricated by reaction hot pressing of Ti-SiC system
L. J. Huang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
The effect of a small addition of boron on the sintering densification, microstructure and mechanical properties of powder metallurgy Ti-7Ni alloy
S. D. Luo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Fabrication of TiCp/Ti-6Al-4V surface composite via friction stir processing (FSP): Process optimization, particle dispersion-refinement behavior and hardening mechanism
Bo Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Formation of intermetallic phase in Ni/Ti multilayer structure by ion implantation and thermal annealing
Suzana Petrovic et al.
INTERMETALLICS (2012)
Electronic structure of Ti-Ni alloys: An XPS and NEXAFS study
B. V. Senkovskiy et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
Bey Vrancken et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
High temperature tensile properties of in situ TiBw/Ti6Al4V composites with a novel network reinforcement architecture
L. J. Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Microstructure and mechanical properties of in situ synthesised (TiC+TiB)/Ti-6Al-4V composites prepared by powder metallurgy
P. Zhou et al.
MATERIALS SCIENCE AND TECHNOLOGY (2011)
Room temperature tensile fracture characteristics of in situ TiBw/Ti6A14V composites with a quasi-continuous network architecture
L. J. Huang et al.
SCRIPTA MATERIALIA (2011)
Development of titanium boride (TiB) dispersed titanium (Ti) matrix composite by direct laser cladding
Jyotsna DuttaMajumdar et al.
MATERIALS LETTERS (2010)
In situ (TiBw + TiCp)/Ti6Al4V composites with a network reinforcement distribution
L. J. Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Suitability of nickel as alloying element in titanium sintered in solid state
I. M. Robertson et al.
POWDER METALLURGY (2009)
In situ TiBw/Ti-6Al-4V composites with novel reinforcement architecture fabricated by reaction hot pressing
L. J. Huang et al.
SCRIPTA MATERIALIA (2009)
Strengthening of copper matrix composites by nickel-coated single-walled carbon nanotube reinforcements
Chuju Kim et al.
SYNTHETIC METALS (2009)
Processing-structure-property aspects of particulate- and whisker-reinforced titanium matrix composites
S. C. Tjong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Enhanced tensile plasticity in ultrafine-grained metallic composite fabricated by friction stir process
C. M. Hu et al.
SCRIPTA MATERIALIA (2008)
Microstructures and tensile behavior of carbon nanotube reinforced Cu matrix nanocomposites
Kyun Tae Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
MWCNTs/AZ31 surface composites fabricated by friction stir processing
Y Morisada et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Strengthening in carbon nanotube/aluminium (CNT/Al) composites
R George et al.
SCRIPTA MATERIALIA (2005)
Direct observation of toughening mechanisms in carbon nanotube ceramic matrix composites
Z Xia et al.
ACTA MATERIALIA (2004)
Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements
S Gorsse et al.
ACTA MATERIALIA (2003)
Thermal transport measurements of individual multiwalled nanotubes
P Kim et al.
PHYSICAL REVIEW LETTERS (2001)
Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties
MF Yu et al.
PHYSICAL REVIEW LETTERS (2000)