4.6 Article

Seismic behaviour of piles in non-liquefiable and liquefiable soil

Journal

BULLETIN OF EARTHQUAKE ENGINEERING
Volume 20, Issue 1, Pages 77-111

Publisher

SPRINGER
DOI: 10.1007/s10518-021-01244-4

Keywords

Liquefaction; Soil-pile-structure interaction; Shake table; Seismic; Dynamic finite element; OpenSees

Ask authors/readers for more resources

This study investigated the nonlinear soil-pile-structure interaction using three-dimensional nonlinear finite element models and verified them with large-scale shaking table tests. It evaluated pile responses in different soil conditions to ground motions with varying intensities, considering kinematic and inertial interaction effects. The study found that piles in liquefiable soil experienced significantly increased bending moments, with inertial interaction contributing the most to bending moments at the top and interface of piles.
This paper investigates the nonlinear soil-pile-structure interaction employing three-dimensional nonlinear finite element models verified with the results of large-scale shaking table tests of model pile groups-superstructure systems. The responses of piles in both liquefiable and non-liquefiable soil sites to ground motion with varying intensities were evaluated considering both kinematic and inertial interaction. The calculated piles and soil responses agreed well with the responses measured during the shaking events. The numerical models correctly predicted the different pile deformation modes that were exhibited in the experiments. The finite element analysis was then employed to perform a parametric study to evaluate the kinematic and inertial effects on the piles' response, considering different ground motion Intensity and piles characteristics. It was found that the bending moment of piles in the liquefiable site increases significantly, compared to the non-liquefiable site, due to the loss of lateral support of the liquified soil, and the maximum bending moment occurs at the interface between the loose and dense sand layers. The inertial interaction contributes the most to the bending moments at the pile top and the interface between the top clay and liquefied loose sand layers. For piles with a larger diameter, the bending moment due to kinematic interaction increases significantly, and the bending moment distribution corresponds to short (rigid) pile behaviour. In addition, the piles at the saturated site displace laterally as a rigid body during strong ground motions because the pile base loses the lateral support due to the soil liquefaction. Finally, the kinematic interaction effect becomes more significant for piles with higher elastic modulus.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.6
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available