☆ 4.7 Article

Mechanical properties and corrosion behavior of galvanized steel/Al dissimilar joints

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

Related references

Note: Only part of the references are listed.

Article Mechanics

Effect of locking mode on mechanical properties and failure behavior of CFRP/Al electromagnetic riveted joint

Hao Jiang et al.

Summary: This study investigated three ways of joining CFRP and Al sheets using EMR, and studied the deformation characteristics, mechanical properties, and failure behavior of the joints in different locking modes. The results indicated that the locking mode and discharge energy significantly affected the performance of the joint, and each joint had its own characteristics, providing guidance for selecting the appropriate locking mode based on actual requirements.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

Fatigue behaviors and mechanism-based life evaluation on SPR-bonded aluminum joint

Guanghan Wu et al.

Summary: The fatigue behaviors of hybrid joints, which combine cold-formed mechanical fastening with adhesive bonding, are not fully understood due to complex load transfer paths and interactions between the two joining techniques. This study investigated fatigue tests on different joint types and evaluated failure mechanisms through terminated fatigue tests and numerical analysis. It was found that periodic and asymmetric failure modes exist in SPR-bonded joints, where crack pinning and asymmetric failure affect crack growth in adhesive bonding and intensify damage on SPR joining. A mechanism-based fatigue life evaluation method was proposed and showed good correlations with experimental results under different loading conditions.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Construction & Building Technology

Study on surface characteristics and stochastic model of corroded steel in neutral salt spray environment

Min Xia et al.

Summary: An artificial accelerated corrosion test was conducted to study the surface morphology characteristic of corroded steel in a neutral salt spray environment. Results showed that the corrosion depth of steel surfaces generally follows a normal distribution, while the pit depth and aspect ratio follow a lognormal distribution. The parameters of the corroded steel surfaces changed with the degree of corrosion.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

The effects of harsh aging environments on the properties of neat and MWCNT reinforced epoxy resins

Abdullah Aslan et al.

Summary: This study investigated the effects of different harsh aging environments on the properties of neat and MWCNT reinforced epoxy resins, showing that acidic environments led to increased water absorption and decreased strength. Surprisingly, the strength of specimens aged in NaCl solution environment increased by 29%, contrary to previous literature. Additionally, MWCNT reinforcement was found to adversely affect the strength of the epoxy resin.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Corrosion performance of hot-dip galvanized zinc-aluminum coated steel rebars in comparison to the conventional pure zinc coated rebars in concrete environment

Abdulaziz Al-Negheimish et al.

Summary: In this study, zinc was alloyed with aluminum to enhance the corrosion resistance of hot-dip galvanized coated steel rebars, with the 10%Al-90%Zn alloy providing the best results. The corrosion resistance performances of the coated rebars were evaluated using various test methods, and the 10AZ-coated rebar showed superior performance compared to the 100Z-coated rebar. Various techniques were employed to study the kinetics and corrosion mechanism of the coated rebars.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Engineering, Industrial

Numerical modelling and experimental investigation of the Riv-Bonding process

Yunpeng Liu et al.

Summary: Riv-Bonding technique is a major joining approach in the automotive industry, combining the advantages of adhesive bonding and self-pierce riveting. This study developed a finite element model suitable for industrial applications to accurately predict the Riv-Bonding process.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Manufacturing

Corrosion behavior in aluminum/galvanized steel resistance spot welds and self-piercing riveting joints in salt spray environment

Bo Pan et al.

Summary: This paper investigated the corrosion behavior of aluminum alloy/galvanized steel joints fabricated by different methods exposed to salt-spray cycles, highlighting the impact of crevice on corrosion behavior and the difference in corrosion between RSW and SPR joints. The stable corrosion products of Al and Zn-Fe alloy, as well as additional observed corrosion products, were explained using Pourbaix diagrams, metastable corrosion products, and possible chemical reactions.

JOURNAL OF MANUFACTURING PROCESSES (2021)

Add to Collection

Article Engineering, Civil

Comparative study on joining quality of electromagnetic driven self-piecing riveting, adhesive and hybrid joints for Al/steel structure

Hao Jiang et al.

Summary: The electromagnetic self-piecing riveted-adhesive hybrid joining method is proposed for Al/steel structure, showing superior performance in peak load and energy absorption, as well as better reliability and security during the failure process.

THIN-WALLED STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Comparative assessment of mechanical properties of HPS between electrochemical corrosion and spray corrosion

Linfa Xiao et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Engineering, Industrial

Analysis of effects of process factors on corrosion resistance of adhesive bonded joints for aluminum alloys

Sang Yoon Park et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Multidisciplinary

Effect of atmospheric pressure plasma treatment on surface physicochemical properties of carbon fiber reinforced polymer and its interfacial bonding strength with adhesive

Jianping Lin et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Raman and XPS depth profiling technique to investigate the corrosion behavior of FeSiAl alloy in salt spray environment

Yang Guo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Coatings & Films

The effect of exposure conditions on performance evaluation of post-treated anodic oxides on an aerospace aluminium alloy: Comparison between salt spray and immersion testing

B. J. Usman et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Engineering, Manufacturing

Joint quality of self-piercing riveting (SPR) and mechanical behavior under the frictional effect of various rivet coatings

Md Abdul Karim et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

Add to Collection

Article Engineering, Civil

Investigations on mechanical properties and microtopography of electromagnetic self-piercing riveted joints with carbon fiber reinforced plastics/aluminum alloy 5052

Jusong Liang et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)

Add to Collection

Article Engineering, Civil

Microstructure and mechanical property evolution of CFRP/Al electromagnetic riveted lap joint in a severe condition

Hao Jiang et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Review Engineering, Multidisciplinary

Review on techniques to improve the strength of adhesive joints with composite adherends

X. Shang et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Mechanics

Shear failure behavior of CFRP/Al and steel/Al electromagnetic self-piercing riveted joints subject to high-speed loading

Hao Jiang et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Chemical

Effect of zinc chloride added to self-etching primer on bond strength to caries-affected dentin and chemical-physical-mechanical properties of adhesives

R. M. P. Campos et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Structural design of half hollow rivet for electromagnetic self-piercing riveting process of dissimilar materials

Hao Jiang et al.

MATERIALS & DESIGN (2019)

Add to Collection

Review Engineering, Civil

Quality of self-piercing riveting (SPR) joints from cross-sectional perspective: A review

Rezwanul Haque

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)

Add to Collection

Article Electrochemistry

Cross comparison of TCP conversion coating performance on aluminum alloys during neutral salt-spray and thin-layer mist accelerated degradation testing

Catherine A. Munson et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Engineering, Chemical

Fatigue resistance of an aluminium one-component polyurethane adhesive joint for the automotive industry: Effect of surface roughness and adhesive thickness

Y. Boutar et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)

Add to Collection

Article Chemistry, Applied

A microclimate model to simulate neutral salt spray testing for corrosion inhibitor evaluation and functional coating development

F. F. Chen et al.

PROGRESS IN ORGANIC COATINGS (2017)

Add to Collection

Article Engineering, Industrial

Joining of dissimilar materials

K. Martinsen et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)

Add to Collection

Article Automation & Control Systems

Self-piercing riveting of similar and dissimilar titanium sheet materials

Xiaocong He et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

Add to Collection

Article Engineering, Industrial

Single-sided piercing riveting for adhesive bonding in vehicle body assembly

Yuhong Liu et al.

JOURNAL OF MANUFACTURING SYSTEMS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Durability on alternate immersion test of self-piercing riveting aluminium joint

Luigi Calabrese et al.

MATERIALS & DESIGN (2013)

Add to Collection

Article Materials Science, Multidisciplinary

The behavior of aluminum in alkaline media

KC Emregül et al.

CORROSION SCIENCE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.