☆ 4.6 Article

Effect of the Al, Cr and B elements on the mechanical properties and oxidation resistance of Nb-Si based alloys: a review

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2021)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Influence of high pressure on the structure, hardness and brittle-to-ductile transition of NbSi2 ceramics

D. L. Pu et al.

Summary: This study applies first-principles calculations to investigate the impact of pressure on the properties of NbSi2. It is found that increasing pressure results in higher hardness and elastic modulus of NbSi2, as well as induces a transition from brittleness to ductility in different phases. The enhancement of mechanical properties is attributed to the increased electronic hybridization between Nb and Si under pressure, demonstrated by chemical bonding interactions.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Review Chemistry, Physical

Oxidation protection of tungsten alloys for nuclear fusion applications: A comprehensive review

Tao Fu et al.

Summary: Tungsten, as the most prominent plasma-oriented material in nuclear fusion reactors, suffers from poor oxidation resistance at high temperatures. Scholars have suggested that self-passivating tungsten alloy and surface protection technology are effective ways to address this issue. Studies on various alloys and coatings for oxidation protection of tungsten have been reviewed, with analysis on their microstructure, oxidation behavior, and failure mechanism. Future development direction and trend in oxidation protection of W-based materials are also discussed.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Structural, electronic, mechanical and thermodynamic properties of Cr-Si binary silicides from first-principles investigations

Y. Pan et al.

Summary: Cr-Si binary silicides are promising advanced functional materials widely used in semiconductors, thermoelectric, and high temperature industries. Structural, mechanical, electronic, and thermodynamic properties of Cr-Si silicides were studied using first-principles. A novel Cr2Si orthorhombic structure was predicted and different silicides showed varying properties, with Cr3Si having larger moduli but Cr2Si exhibiting better ductility and plasticity. These findings provide insight into the comprehensive properties of Cr-Si silicides and guide future improvements in their performance.

VACUUM (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of Functional Surface Layers on Stainless Steels by Laser Alloying

Zoia Duriagina et al.

Summary: Laser alloying is an effective method for forming functional surface layers on metallic materials, particularly stainless steels. By optimizing parameters, coatings with complex microstructures and high wear resistance can be produced on AISI 420 and AISI 304 stainless steels.

METALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Cr2O3 Content on Microstructure and Mechanical Properties of Al2O3 Matrix Composites

Kunkun Cui et al.

Summary: Al2O3-Cr2O3 refractories are solid solutions that can resist slag erosion effectively. The introduction of Cr2O3 in the composite material leads to decreased compactness and mechanical properties, as well as reduced thermal shock resistance. A Cr2O3 content of 20-30% in the composite refractory can meet the requirements for smelting reduction iron making kiln lining.

COATINGS (2021)

Add to Collection

Article Materials Science, Ceramics

Formation of MoSi2 and Si/MoSi2 coatings on TZM (Mo-0.5Ti-0.1Zr-0.02C) alloy by hot dip silicon-plating method

Yingyi Zhang et al.

Summary: MoSi2 and Si-MoSi2 composite coatings with fine MoSi2 grain size and high surface silicon concentration were successfully deposited on TZM alloy using a hot dip silicon-plating method. The gradient structure of the coatings, including MoSi2 layer, Mo5Si3C layer, and Si-MoSi2 layer, contributes to reducing stress mutation and crack propagation. SEM and CLSM results demonstrate that a significant portion of MoSi2 grains are covered by silicon layer, leading to very low coating surface roughness when deposition time exceeds 10 minutes.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Microstructure and Oxidation Behavior of Metal-Modified Mo-Si-B Alloys: A Review

Laihao Yu et al.

Summary: This study evaluated the oxidation performance of Mo-Si-B alloys and found that alloying is an effective way to improve their oxidation resistance.

COATINGS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Pyrometallurgical recovery of zinc and valuable metals from electric arc furnace dust - A review

Jie Wang et al.

Summary: Electric arc furnace dust (EAFD) is a kind of metallurgical solid waste with huge production, and how to efficiently recover valuable metals from it has become the aim of various treatment processes. This paper discusses the physical and chemical properties of EAFD, as well as various treatment processes and the properties of the metals obtained from them. It provides theoretical guidance and practical reference for the treatment and utilization of EAFD.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

High-throughput synthesis of oxidation-resistant Nb-Si based alloy thin film by magnetron co-sputtering

Chen Sun et al.

Summary: In this study, a high-throughput method was applied to study the oxidation behavior of Nb-Si based alloy using composition spread alloy film as combinatorial libraries. By depositing Nb-Si based alloy film with extended composition gradients through (multi)magnetron co-sputtering, the film composed of amorphous phase was obtained. Different oxide scales were efficiently defined across the entire composition space by combinatorial libraries after oxidation at 1250 degrees C for 10 min and 20 min.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Evolution of surface morphology, roughness and texture of tungsten disilicide coatings on tungsten substrate

Yingyi Zhang et al.

Summary: The hot dip silicon-plating method is a promising surface coating technology, but the correlation between process parameters and properties of WSi2 coatings is not entirely clear. SEM, TEM, AFM, and EBSD methods were used to study the evolution behavior of surface and interface morphologies, roughness, and texture of tungsten disilicide coatings. The results showed that the surface morphologies and roughness were influenced by deposition time, and the orientation of WSi2 grains was biased towards (100) and (110) crystal planes due to the vigorous bombardment of high-energy Si ions.

VACUUM (2021)

Add to Collection

Article Chemistry, Physical

Role of hydrogen on the structural stability, mechanical and thermodynamic properties of the cubic TM3Si silicides

Yong Pan

Summary: This study investigates the influence of hydrogen on the TM3Si silicides using first-principles calculations, revealing its effects on the structural stability, mechanical properties, and thermodynamic properties of the materials.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Add to Collection

Article Materials Science, Ceramics

Microstructure and mechanical properties of CaAl12O19 reinforced Al2O3-Cr2O3 composites

Kunkun Cui et al.

Summary: Al2O3-Cr2O3 composites with CaO addition exhibit improved mechanical properties, sintering properties, and thermal shock resistance. The presence of CaO enhances the compactness of the composites and helps fill the gaps between solid solutions, resulting in reduced porosity. Excessive CaO addition, however, deteriorates the mechanical properties by increasing porosity.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Improvement of oxidation resistance of Nb-Ti-Si based alloys with additions of Al, Cr and B at different temperatures

Guangxin Sun et al.

Summary: The effects of Cr, Al, and B on the microstructure and high-temperature oxidation behaviors of Nb-Ti-Si based alloys were studied. Among the three elements, Al and Cr were beneficial to oxidation resistance at 1200°C, while B was favorable at 1300°C. The ratio of these alloying elements may play a significant role in enhancing oxidation resistance.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Rare Earth Elements Enhanced the Oxidation Resistance of Mo-Si-Based Alloys for High Temperature Application: A Review

Laihao Yu et al.

Summary: This study systematically reviewed the effects of rare earth elements on the microstructure and oxidation behavior of Mo-Si-based alloys, as well as the strengthening mechanism of rare earth elements on the oxidation behavior. The research showed that adding rare earth elements can optimize the microstructure, promote the formation of protective oxide scales, and enhance the oxidation resistance of the alloy, providing a direction for expanding the application field in the future.

COATINGS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

The Protection, Challenge, and Prospect of Anti-Oxidation Coating on the Surface of Niobium Alloy

Xu Zhang et al.

Summary: This article reviews the research on surface coatings of niobium (Nb)-based alloys conducted by scholars from domestic and foreign institutions over the past 30 years. Various preparation methods and oxidation behavior of the coatings are summarized, aiming to provide valuable insights for addressing the application limitations of Nb-based alloys in high-temperature, oxygen-enriched environments.

COATINGS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Microstructure and Oxidation Behavior of Anti-Oxidation Coatings on Mo-Based Alloys through HAPC Process: A Review

Tao Fu et al.

Summary: Mo and its alloys have excellent high temperature mechanical properties but poor oxidation resistance. The halide activated pack cementation (HAPC) technology is considered an ideal method to solve the oxidation problem. This work summarizes the microstructure, oxide growth mechanism, oxidation characteristics, and future research direction of HAPC coatings.

COATINGS (2021)

Add to Collection

Article Chemistry, Physical

Synthesis WSi2 coating on W substrate by HDS method with various deposition times

Yingyi Zhang et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

The hydrogenation mechanism of PtAl and IrAl thermal barrier coatings from first-principles investigations

Y. Pan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Materials Science, Coatings & Films

Investigation of morphology and texture properties of WSi2 coatings on W substrate based on contact-mode AFM and EBSD

Yingyi Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Toughening Mechanism of Mullite Matrix Composites: A Review

Kunkun Cui et al.

COATINGS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructures in a Nb-Cr-V-W-Ta high entropy alloy during annealing

S. K. Varma et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of the microstructure refinement by powder metallurgy on the oxidation behavior of Nb-6Mo-20Si-3Cr silicide-based alloy

Ki Beom Park et al.

MATERIALS CHARACTERIZATION (2020)

Add to Collection

Article Materials Science, Ceramics

Insight into the structures, melting points, and mechanical properties of NbSi2 from first-principles calculations

Shuang-Lun Wang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Microstructure and Mechanical Properties of MoSi2 Coating Deposited on Mo Substrate by Hot Dipping Processes

Yingyi Zhang et al.

JOURNAL OF NANOELECTRONICS AND OPTOELECTRONICS (2019)

Add to Collection

Article Materials Science, Ceramics

Effect of hot-dip siliconizing time on phase composition and microstructure of Mo-MoSi2 high temperature structural materials

Yingyi Zhang et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Si on thermal stability of Nb-22.5Cr alloy

Liping Deng et al.

VACUUM (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural evolution and mechanical properties of Nb-Si-Cr ternary alloys with a tri-phase Nb/Nb5Si3/Cr2Nb microstructure fabricated by spark plasma sintering

Shasha Zhang et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Physical

A Study of the Effects of Al, Cr, Hf, and Ti Additions on the Microstructure and Oxidation of Nb-24Ti-18Si Silicide Based Alloys

Jack Nelson et al.

MATERIALS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental studies and modeling for the transition from internal to external oxidation of three-phase Nb-Si-Cr alloys

Wei Jiang et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Physical

Effect of Cr on the evolution of microstructures in as-cast ternary niobium-silicide-based composites

Poulami Maji et al.

INTERMETALLICS (2017)

Add to Collection

Article Materials Science, Ceramics

Microstructure and oxidation behavior of Si-MoSi2 functionally graded coating on Mo substrate

Yingyi Zhang et al.

CERAMICS INTERNATIONAL (2017)

Add to Collection

Article Chemistry, Physical

Alloying effects on the microstructure and properties of Nb-Si based ultrahigh temperature alloys

Song Zhang et al.

INTERMETALLICS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Oxidation response of three Nb-Cr-Mo-Si-B alloys in air

Kathryn S. Thomas et al.

CORROSION SCIENCE (2015)

Add to Collection

Article Chemistry, Physical

Effects of B addition on the microstructure and properties of Nb silicide based ultrahigh temperature alloys

Song Zhang et al.

INTERMETALLICS (2015)

Add to Collection

Article Chemistry, Physical

Simultaneous coating of Si and B on Nb-Si-B alloys by a halide activated pack cementation method and oxidation behaviors of the alloys with coatings at 1100 °C

Jingchang Cheng et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Room temperature mechanical properties and high temperature oxidation resistance of a high Cr containing Nb-Si based alloy

L. N. Jia et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Improvement in the oxidation resistance of Nb-Ti-Si-Cr-Al-Hf alloys containing alloyed Ge and B

Linfen Su et al.

CORROSION SCIENCE (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of silicon on the fracture toughness and oxidation behavior of hot pressed NbCr2 alloys

Shiqiang Lu et al.

MATERIALS & DESIGN (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of oxidation resistant suction cast Nb-Si-Al alloy

S. Kashyap et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Add to Collection

Article Materials Science, Multidisciplinary

The effects of uncommon silicides on the oxidation behavior of alloys from the Nb-Cr-Si system

Brendan Voglewede et al.

CORROSION SCIENCE (2012)

Add to Collection

Article Chemistry, Physical

Oxidation behaviors of Nb-Si-B ternary alloys at 1100 °C under ambient atmosphere

Jingchang Cheng et al.

INTERMETALLICS (2012)

Add to Collection

Article Chemistry, Physical

Study of the effect of Cr and Ti additions in the microstructure of Nb-18Si-5Ge based in-situ composites

Zifu Li et al.

INTERMETALLICS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of B and Cr on the high temperature oxidation behaviour of novel γ/γ′-strengthened Co-base superalloys

L. Klein et al.

CORROSION SCIENCE (2011)

Add to Collection

Article Chemistry, Physical

Thermodynamic modeling of the Nb-rich corner in the Nb-Si-B system

Zhiping Sun et al.

INTERMETALLICS (2011)

Add to Collection

Article Chemistry, Physical

Experimental Investigation on the Phase Equilibria of the Nb-Ti-Si-B System at 1500 A°C

Zhiping Sun et al.

JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2011)

Add to Collection

Article Chemistry, Physical

Study of the role of Fe and Sn additions in the microstructure of Nb-24Ti-18Si-5Cr silicide based alloys

N. Vellios et al.

INTERMETALLICS (2010)

Add to Collection

Article Chemistry, Physical

Study of the role of B addition on the microstructure of the Nb-24Ti-18Si-8B alloy

T. Thandorn et al.

INTERMETALLICS (2010)

Add to Collection

Article Chemistry, Physical

Study of the effects of Ge addition on the microstructure of Nb-18Si in situ composites

Li Zifu et al.

INTERMETALLICS (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental study and modeling of high temperature oxidation of Nb-base in situ composites

Dengzun Yao et al.

CORROSION SCIENCE (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Room temperature mechanical properties and high temperature oxidation behavior of MoSi2 matrix composite reinforced by adding La2O3 and Mo5Si3

Jianhui Yan et al.

MATERIALS CHARACTERIZATION (2009)

Add to Collection

Article Chemistry, Applied

Effect of cerium on miemstructures and high temperature oxidation resistance of an nb-si system in-situ composite

Aiqin Liu et al.

JOURNAL OF RARE EARTHS (2007)

Add to Collection

Article Chemistry, Physical

The effects of Ti and Mo additions on the microstructure of Nb-silicide based in situ composites

J. Geng et al.

INTERMETALLICS (2006)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Cyclic-oxidation resistance of niobium-base in situ composites:: Modeling and experimentation

KS Chan

OXIDATION OF METALS (2004)

Add to Collection

Article Nanoscience & Nanotechnology

High-temperature strength and room-temperature toughness of Nb-W-Si-B alloys prepared by arc-melting

J Sha et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Add to Collection

Article Materials Science, Multidisciplinary

Ultrahigh-temperature materials for jet engines

JC Zhao et al.

MRS BULLETIN (2003)

Add to Collection

Article Nanoscience & Nanotechnology

Alloying effects on fracture mechanisms in Nb-based intermetallic in-situ composites

KS Chan

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)

Add to Collection

Article Chemistry, Physical

Oxidation resistance of powder compacts of the Nb-Si-Cr system and Nb3Si5Al2 matrix compacts prepared by spark plasma sintering

T Murakami et al.

INTERMETALLICS (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Oxidation of refractory metals in air and low pressure oxygen gas

JR DiStefano et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.