Experimental and numerical study on thermal performance of an indirectly irradiated solar reactor with a clapboard-type internally circulating fluidized bed

Fluidized-bed based solar reactors for the gasification of biomass have been widely recognized as a promising approach to produce high-quality syngas due to the merits, e.g. continuous operation and superior heat and mass transport. In this work, a novel high-temperature solar reactor with a clapboard-type internally circulating configuration that can efficiently mitigate the overheating of the bed wall affected by non-uniform solar radiation, is designed, constructed, and experimentally investigated under Singapore's first 28 kWe high-flux solar simulator. To investigate the flow dynamics in the high-temperature solar reactor, a transient 3D computational fluid dynamics multi-phase model is developed accordingly and validated by the experimental data. The simulated results can well clarify the flow and thermal behaviours in experiments. The effects of the gas flow rate and bed mass on the thermal performances of different Group-B particle materials are studied through experiments and simulation. The results indicate that increasing the bed mass in the solar reactor is capable of mitigating the overheating of the absorber surface caused by hot spots. The gas flow rate is dependent on the particle thermo-physical properties and shape as well as the clapboard geometric parameters. The highest solar-tothermal conversion efficiency (defined as the ratio of the accumulated sensible heat of the particles to the solar power input) of 10.7 +/- 0.4% is achieved by SiC due to its superior thermal conductivity.

Automated summary

Fluidized-bed based solar reactors for biomass gasification are considered promising for producing high-quality syngas. A novel high-temperature solar reactor was designed and investigated under a high-flux solar simulator. Experiment and simulation results showed that increasing bed mass can mitigate overheating, and gas flow rate is influenced by particle properties and reactor geometry.