Related references
Note: Only part of the references are listed.Numerical investigation on the mixing mechanism in a cross-torus paddle mixer using the DEM-CFD method
Shuo Li et al.
POWDER TECHNOLOGY (2021)
CFD-DEM modelling of mixing of granular materials in multiple jets fluidized beds
Runjia Liu et al.
POWDER TECHNOLOGY (2020)
A review of existing mixing indices in solid-based continuous blending operations
Pooja Bhalode et al.
POWDER TECHNOLOGY (2020)
Process intensification of biomass fast pyrolysis through autothermal operation of a fluidized bed reactor
Joseph P. Polin et al.
APPLIED ENERGY (2019)
Large-scale GPU based DEM modeling of mixing using irregularly shaped particles
Nicolin Govender et al.
ADVANCED POWDER TECHNOLOGY (2018)
Numerical investigation of a coarse-grain discrete element method in solid mixing in a spouted bed
Kazuya Takabatake et al.
CHEMICAL ENGINEERING JOURNAL (2018)
DEM study of the effect of blade-support spokes on mixing performance in a ribbon mixer
G. R. Chandratilleke et al.
POWDER TECHNOLOGY (2018)
Heat and Mass Transfer Effects in a Furnace-Based Micropyrolyzer
Juan Proano-Aviles et al.
ENERGY TECHNOLOGY (2017)
Numerical study of the mixing efficiency of a batch mixer using the discrete element method
Gytis Basinskas et al.
POWDER TECHNOLOGY (2016)
Characterizing 3D granular flow structures in a double screw mixer using X-ray particle tracking velocimetry
Todd A. Kingston et al.
POWDER TECHNOLOGY (2015)
Analysis of the mixing of solid particles in a plowshare mixer via discrete element method (DEM)
Meysam Alian et al.
POWDER TECHNOLOGY (2015)
The effect of low-concentration oxygen in sweep gas during pyrolysis of red oak using a fluidized bed reactor
Kwang Ho Kim et al.
FUEL (2014)
Flow and Mixing of Cohesive Particles in a Vertical Bladed Mixer
Rohana Chandratilleke et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Quantifying mixing in 3D binary particulate systems
Norman K. G. Keller et al.
CHEMICAL ENGINEERING SCIENCE (2013)
The kinematics of non-cohesive, sphero-cylindrical particles in a low-speed, vertical axis mixer
X. Hua et al.
CHEMICAL ENGINEERING SCIENCE (2013)
A particle-scale index in the quantification of mixing of particles
G. R. Chandratilleke et al.
AICHE JOURNAL (2012)
A comprehensive frictional-kinetic model for gas-particle flows: Analysis of fluidized and moving bed regimes
Simon Schneiderbauer et al.
CHEMICAL ENGINEERING SCIENCE (2012)
Mixing of powders and granular materials by mechanical means-A perspective
John Bridgwater
PARTICUOLOGY (2012)
Progress in Chemical-Looping Combustion and Reforming technologies
Juan Adanez et al.
PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2012)
CFD simulation of a chemical-looping fuel reactor utilizing solid fuel
Kartikeya Mahalatkar et al.
CHEMICAL ENGINEERING SCIENCE (2011)
Drag law for monodisperse gas-solid systems using particle-resolved direct numerical simulation of flow past fixed assemblies of spheres
S. Tenneti et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2011)
A Review of X-Ray Flow Visualization With Applications to Multiphase Flows
Theodore J. Heindel
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2011)
Enhancing mixing of particles by baffles in a rotating drum mixer
Maoqiang Jiang et al.
PARTICUOLOGY (2011)
Effect of blade angle and particle size on powder mixing performance in a rectangular box
Muhammad Shafiq Siraj et al.
POWDER TECHNOLOGY (2011)
Possibilities and Limits of Application of Electrical Resistance Tomography in Hydrodynamics of Bubble Columns
Dominique Toye et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2010)
Double X-ray Tomography of a Bubbling Fluidized Bed
R. F. Mudde
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)
Numerical Analysis of Solids Mixing in Pressurized Fluidized Beds
Niels C. Deen et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)
Effect of Blade Speed on Granular Flow and Mixing in a Cylindrical Mixer
G. R. Chandratilleke et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)
Time-resolved X-ray tomography of a fluidized bed
R. F. Mudde
POWDER TECHNOLOGY (2010)
Mixing characteristics of wet granular matter in a bladed mixer
Stefan Radl et al.
POWDER TECHNOLOGY (2010)
A comprehensive probability density function formalism for multiphase flows
Madhusudan G. Pai et al.
JOURNAL OF FLUID MECHANICS (2009)
Effects of blade rake angle and gap on particle mixing in a cylindrical mixer
G. R. Chandratilleke et al.
POWDER TECHNOLOGY (2009)
Local time-averaged gas holdup in a fluidized bed with side air injection using X-ray computed tomography
Nathan R. Franka et al.
POWDER TECHNOLOGY (2009)
Predicting the flow mode from hoppers using the discrete element method
William R. Ketterhagen et al.
POWDER TECHNOLOGY (2009)
Procedure for estimation and reporting of uncertainty due to discretization in CFD applications
Ishmail B. Celik et al.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Enskog theory for polydisperse granular mixtures.: II.: Sonine polynomial approximation
Vicente Garzo et al.
PHYSICAL REVIEW E (2007)
Quantitative measurement of solids distribution in gas-solid riser flows using electrical impedance tomography and gamma densitometry tomography
P. R. Tortora et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2006)
Time-resolved γ-densitometry imaging within fluidized beds
RF Mudde et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)
Electrical capacitance tomography for conventional fluidized bed measurements-remarks on the measuring technique
YT Makkawi et al.
POWDER TECHNOLOGY (2004)
Kinetic temperatures for a granular mixture -: art. no. 041301
SR Dahl et al.
PHYSICAL REVIEW E (2002)
Transient fluidization and segregation of binary mixtures of particles
A Marzocchella et al.
AICHE JOURNAL (2000)