4.7 Review

Synthesis of nanomaterials using various top-down and bottom-up approaches, influencing factors, advantages, and disadvantages: A review

Related references

Note: Only part of the references are listed.
Article Physics, Condensed Matter

Investigation on structural, optical and photocatalytic activity of CoMn2O4 nanoparticles prepared via simple co-precipitation method

John Abel Martin Mark et al.

Summary: Tetragonal spinel Cobalt manganite nanoparticles were successfully prepared via co-precipitation route, with crystal structure and phase purity confirmed by PXRD and optical band gap measured at 1.70 and 2.0 eV. Morphological analysis was conducted using SEM images, with elemental composition determined by EDX spectrum. FTIR and PL spectrum provided information on functional groups and crystal defects, while magnetic properties were analyzed with VSM. Photocatalytic activity against organic dyes under direct sunlight showed degradation efficiencies of 87.80%, 79.43%, and 52.78% for MG, MB, and CR dyes respectively.

PHYSICA B-CONDENSED MATTER (2021)

Article Energy & Fuels

Investigation on performance of CdTe solar cells with CdS and bilayer ZnS/CdS windows grown by thermal evaporation technique

Rashmitha Keshav et al.

Summary: This paper focuses on enhancing the performance of CdS/CdTe solar cells by replacing CdS with a ZnS/CdS bilayer window. The study shows that the ZnS/CdS bilayer window offers higher fill factor and conversion efficiency, leading to better overall performance.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Chemistry, Multidisciplinary

Solvent-Free Mechanochemical Synthesis of ZnO Nanoparticles by High-Energy Ball Milling of ε-Zn(OH)2 Crystals

Gil Otis et al.

Summary: A novel solvent-free mechanochemical synthesis approach was presented for producing ZnO nanoparticles from ε-Zn(OH)2 crystals, with a focus on the milling process and characterization of the resulting nanoparticles. The transformation mechanism from ε-Zn(OH)2 to ZnO was investigated, providing insights into the reaction pathway. This study offers a simple, cost-effective, and environmentally friendly method to obtain ZnO nanoparticles, potentially opening up new synthetic pathways in the field.

NANOMATERIALS (2021)

Review Materials Science, Multidisciplinary

Nanomaterials: a review of synthesis methods, properties, recent progress, and challenges

Nadeem Baig et al.

Summary: Nanomaterials are a class of materials with exceptional properties that can be tuned through design, playing a crucial role in the advancement of nanotechnology. Various synthesis methods and unique features of nanomaterials have been discussed in this review, along with a brief history and future perspectives in the field.

MATERIALS ADVANCES (2021)

Review Engineering, Biomedical

Synthesis methods of functionalized nanoparticles: a review

Niyou Wang et al.

Summary: With the continuous improvement of nanoparticle synthesis methods, it is possible to better meet the needs of different applications and enhance their widespread use.

BIO-DESIGN AND MANUFACTURING (2021)

Review Multidisciplinary Sciences

Chemical vapour deposition

Luzhao Sun et al.

Summary: Chemical vapour deposition (CVD) is a powerful technology for producing high-quality solid thin films and coatings, continually being developed to adapt to new materials. This overview and best practices in CVD provide insight into future directions by analyzing current limitations and optimizations.

NATURE REVIEWS METHODS PRIMERS (2021)

Article Materials Science, Multidisciplinary

The synthesis of carbon-based nanomaterials by pulsed laser ablation in water

Entesar A. Ganash et al.

MATERIALS RESEARCH EXPRESS (2020)

Review Engineering, Electrical & Electronic

Metal oxides nanoparticles via sol-gel method: a review on synthesis, characterization and applications

Mritunjaya Parashar et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2020)

Article Chemistry, Physical

Hybrid TiO2-ZnO Nanomaterials Prepared Using Laser Ablation in Liquid

Neli Mintcheva et al.

MATERIALS (2020)

Review Multidisciplinary Sciences

Effect of structure: A new insight into nanoparticle assemblies from inanimate to animate

Chuanhui Huang et al.

SCIENCE ADVANCES (2020)

Article Materials Science, Ceramics

Aerosol assisted chemical vapour deposition of nanostructured ZnO thin films for NO2 and ethanol monitoring

Jian Ding et al.

CERAMICS INTERNATIONAL (2020)

Review Chemistry, Multidisciplinary

Detail review on chemical, physical and green synthesis, classification, characterizations and applications of nanoparticles

Irfan Ijaz et al.

GREEN CHEMISTRY LETTERS AND REVIEWS (2020)

Article Chemistry, Multidisciplinary

Chemical Vapour Deposition of Graphene for Durable Anticorrosive Coating on Copper

Dali Ji et al.

NANOMATERIALS (2020)

Article Materials Science, Multidisciplinary

Synthesis of graphene oxide from graphite by ball milling

Francy Mayoli Casallas Caicedo et al.

DIAMOND AND RELATED MATERIALS (2020)

Article Materials Science, Multidisciplinary

Irradiation induced elongation of Fe nanoparticles embedded in silica films

E. A. Dawi et al.

INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS (2020)

Article Engineering, Chemical

Synthesis and characterization of manganese ferrite nanostructure by co-precipitation, sol-gel, and hydrothermal methods

Leila Asadi Kafshgari et al.

PARTICULATE SCIENCE AND TECHNOLOGY (2019)

Article Chemistry, Physical

Comparative study of magnetite nanoparticles obtained by pulsed laser ablation in water and air

Valery A. Svetlichnyi et al.

APPLIED SURFACE SCIENCE (2019)

Article Chemistry, Inorganic & Nuclear

Hydrothermal synthesis of Ag nanoparticles on the nanocellulose and their antibacterial study

Xuewei Zhang et al.

INORGANIC CHEMISTRY COMMUNICATIONS (2019)

Article Chemistry, Physical

Stability investigation of the γ-MgH2 phase synthesized by high-energy ball milling

Ntumba Lobo et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)

Article Chemistry, Physical

Vapour-solid growth of MoxW1-xTe2 nanobelts by a facile chemical vapour deposition method

Shi-Jian Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Article Instruments & Instrumentation

Materials processing using radio-frequency ion-sources: Ion-beam sputter-deposition and surface treatment

M. Becker et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2019)

Article Electrochemistry

Structural and Optical Properties of Co3O4 Nanoparticles Prepared by Sol-gel Technique for Photocatalytic Application

A. B. Vennela et al.

INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE (2019)

Article Chemistry, Physical

Photocatalytic Activity of Bismuth Ferrite Nanoparticles Synthesized via Sol-Gel Route

Mohsin Siddique et al.

ZEITSCHRIFT FUR PHYSIKALISCHE CHEMIE-INTERNATIONAL JOURNAL OF RESEARCH IN PHYSICAL CHEMISTRY & CHEMICAL PHYSICS (2019)

Review Pharmacology & Pharmacy

Metal nanoparticles synthesis: An overview on methods of preparation, advantages and disadvantages, and applications

Prasad Govindrao Jamkhande et al.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2019)

Article Environmental Sciences

Photocatalytic Degradation Dynamics of Methyl Orange Using Coprecipitation Synthesized Fe3O4 Nanoparticles

Yousef Al-Abdallat et al.

WATER AIR AND SOIL POLLUTION (2019)

Article Nanoscience & Nanotechnology

Pulsed laser ablation of bulk target and particle products in liquid for nanomaterial fabrication

Hongkun Huang et al.

AIP ADVANCES (2019)

Review Materials Science, Multidisciplinary

Review-RF Sputtered Films of Ga2O3

Ashwin Kumar Saikumar et al.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

A brief overview of RF sputtering deposition of boron carbon nitride (BCN) thin films

Moustafa M. Zagho et al.

EMERGENT MATERIALS (2019)

Article Materials Science, Ceramics

Synthesis and characterization of pure tetragonal ZrO2 nanoparticles with enhanced photocatalytic activity

Ch. Venkata Reddy et al.

CERAMICS INTERNATIONAL (2018)

Article Chemistry, Physical

Nanomaterials produced by laser beam ablating Sn-Zn alloy in water

Neli Mintcheva et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Article Chemistry, Multidisciplinary

Synthesis and characterization of magnetite-maghemite nanoparticles obtained by the high-energy ball milling method

A. A. Velasquez et al.

JOURNAL OF NANOPARTICLE RESEARCH (2018)

Article Chemistry, Multidisciplinary

Templated Growth of Pd Nanoparticles Using Sputtering Deposition Process and Its Catalytic Activities

Dario Eberhardt et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2018)

Article Chemistry, Multidisciplinary

Structural, Optical, Morphological and Microbial Studies on SnO2 Nanoparticles Prepared by Co-Precipitation Method

M. V. Arularasu et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2018)

Article Chemistry, Multidisciplinary

Sub-2 nm Single-Crystal Pt Nanoparticles via Sputtering onto a Liquid Polymer

Lianlian Deng et al.

LANGMUIR (2018)

Article Materials Science, Multidisciplinary

Synthesis of ZrO2 nanoparticles using reactive magnetron sputtering and their structural, morphological and thermal studies

Monu Verma et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

Article Materials Science, Multidisciplinary

Preparation and Characterization of Nickel ferrite Nanoparticles via Co-precipitation Method

Suresh Sagadevan et al.

MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2018)

Review Nanoscience & Nanotechnology

Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations

Jaison Jeevanandam et al.

BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2018)

Article Chemistry, Multidisciplinary

Sustainable Synthesis of High-Surface-Area Graphite Oxide via Dry Ball Milling

Alaa El Din Mahmoud et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Materials Science, Multidisciplinary

Ionic liquid assisted hydrothermal synthesis of TiO2 nanoparticles: photocatalytic and antibacterial activity

Kristappagari Manjunath et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2018)

Article Engineering, Electrical & Electronic

Photocatalytic degradation of diverse organic dyes by sol-gel synthesized Cd2V2O7 nanostructures

Fatemeh Mazloom et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)

Article Nanoscience & Nanotechnology

Synthesis of ZnO nanoparticles by co-precipitation method for solar driven photodegradation of Congo red dye at different pH

Rania E. Adam et al.

PHOTONICS AND NANOSTRUCTURES-FUNDAMENTALS AND APPLICATIONS (2018)

Review Materials Science, Multidisciplinary

Sputtering onto a liquid: interesting physical preparation method for multi-metallic nanoparticles

Mai Thanh Nguyen et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2018)

Article Materials Science, Multidisciplinary

Synthesis of graphene nanoplatelets from palm-based waste chicken frying oil carbon feedstock by using catalytic chemical vapour deposition

Mohd Asyadi Azam et al.

MATERIALS TODAY COMMUNICATIONS (2018)

Article Chemistry, Physical

Synthesis and characterization of hausmannite (Mn3O4) nanostructures

B. Jansi Rani et al.

SURFACES AND INTERFACES (2018)

Review Infectious Diseases

The Pros and Cons of the Use of Laser Ablation Synthesis for the Production of Silver Nano-Antimicrobials

Maria Chiara Sportelli et al.

ANTIBIOTICS-BASEL (2018)

Review Chemistry, Physical

Fabrication of efficient metal halide perovskite solar cells by vacuum thermal evaporation: A progress review

Shenghao Wang et al.

CURRENT OPINION IN ELECTROCHEMISTRY (2018)

Article Optics

Enhancement of laser ablation via interacting spatial double-pulse effect

Rui Zhou et al.

OPTO-ELECTRONIC ADVANCES (2018)

Article Engineering, Electrical & Electronic

Exchange Bias Induced by the Spin Glass-Like Surface Spins in Sputter Deposited Fe3O4 Thin Films

Muhammed P. Shameem et al.

IEEE TRANSACTIONS ON MAGNETICS (2017)

Article Chemistry, Inorganic & Nuclear

Effect of different sputtering time on the formation of copper and copper oxide nano particles by magnetron sputtering system

A. Mahmoodi et al.

JOURNAL OF STRUCTURAL CHEMISTRY (2017)

Article Engineering, Electrical & Electronic

Influence of the sol gel synthesis parameters on the photoluminescence properties of ZnO nanoparticles

R. Bekkari et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2017)

Article Physics, Condensed Matter

The magnetic characterization of Fe doped TiO2 semiconducting oxide nanoparticles synthesized by sol-gel method

M. Yeganeh et al.

PHYSICA B-CONDENSED MATTER (2017)

Article Materials Science, Multidisciplinary

Simple mass production of zinc oxide nanostructures via low-temperature hydrothermal synthesis

Samaneh Ghasaban et al.

MATERIALS RESEARCH EXPRESS (2017)

Article Materials Science, Multidisciplinary

Scaling aerosol assisted chemical vapour deposition: Exploring the relationship between growth rate and film properties

Michael J. Powell et al.

MATERIALS & DESIGN (2017)

Article Engineering, Chemical

Sol-gel synthesis, structural and enhanced photocatalytic performance of Al doped ZnO nanoparticles

Reza Mandavi et al.

ADVANCED POWDER TECHNOLOGY (2017)

Review Physics, Applied

A review-application of physical vapor deposition (PVD) and related methods in the textile industry

Sheila Shahidi et al.

EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS (2015)

Review Chemistry, Multidisciplinary

Mechanisms of Nucleation and Growth of Nanoparticles in Solution

Nguyen T. K. Thanh et al.

CHEMICAL REVIEWS (2014)

Review Chemistry, Physical

Research and Development Aspects on Chemical Preparation Techniques of Photoanodes for Dye Sensitized Solar Cells

Nilofar Asim et al.

INTERNATIONAL JOURNAL OF PHOTOENERGY (2014)

Review Physics, Applied

Mechanical properties of nanoparticles: basics and applications

Dan Guo et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2014)

Review Chemistry, Multidisciplinary

Designed CVD Growth of Graphene via Process Engineering

Kai Yan et al.

ACCOUNTS OF CHEMICAL RESEARCH (2013)

Article Chemistry, Inorganic & Nuclear

Trimetallic Borohydride Li3MZn5(BH4)15 (M = Mg, Mn) Containing Two Weakly Interconnected Frameworks

Radovan Cerny et al.

INORGANIC CHEMISTRY (2013)

Article Chemistry, Inorganic & Nuclear

Novel Alkali Earth Borohydride Sr(BH4)2 and Borohydride-Chloride Sr(BH4)Cl

D. B. Ravnsbaek et al.

INORGANIC CHEMISTRY (2013)

Proceedings Paper Energy & Fuels

Pulsed Laser Ablation of Graphite Target in Dimethyformamide

Voranuch Thongpool et al.

10TH ECO-ENERGY AND MATERIALS SCIENCE AND ENGINEERING SYMPOSIUM (2013)

Article Materials Science, Multidisciplinary

The effect of trace nickel additive and ball milling treatment on the near-full densification behavior of ultrafine tungsten powder

Yong Han et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2012)

Article Chemistry, Physical

Hydrogen sorption performance of MgH2 doped with mesoporous nickel- and cobalt-based oxides

Moises Cabo et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Chemistry, Physical

Hydrogen storage properties of MgH2 mechanically milled with α and β SiC

Sandra Kurko et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Chemistry, Physical

Structural and magnetic properties of nanocrystalline NiFeCuMo powders produced by wet mechanical alloying

B. V. Neamtu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Article Chemistry, Physical

Two milling time regimes in the evolution of magnetic anisotropy of mechanically alloyed soft magnetic powders

J. J. Ipus et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Article Chemistry, Physical

Grain and crystallite size evaluation of cryomilled pure copper

M. Samadi Khoshkhoo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Article Chemistry, Physical

Large-scale mechanical peeling of boron nitride nanosheets by low-energy ball milling

Lu Hua Li et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Article Chemistry, Physical

Controlled Synthesis of ZnO Nanostructures: The Role of Source and Substrate Temperatures

Chatchawal Wongchoosuk et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

Article Chemistry, Physical

Phase formation during mechanically activated annealing of nanocrystalline Cr-60at.%Al

M. S. Archana et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Article Chemistry, Physical

Al-(L12)Al3Ti nanocomposites prepared by mechanical alloying: Synthesis and mechanical properties

S. S. Nayak et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Article Chemistry, Physical

Synthesis of (Mo1-x-Crx)Si2 nanostructured powders via mechanical alloying and following heat treatment

R. Yazdani-rad et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Article Chemistry, Physical

Processing and surface properties of Al-AlN composites produced from nanostructured milled powders

Hamid Abdoli et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Article Chemistry, Physical

Observation of enhanced positive magnetoresistance at low temperatures in Ni0.8Fe0.2/C granular composites

Guruprasad Mandal et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Article Chemistry, Physical

Electrochemical impedance spectroscopy of HVOF-sprayed NiTi intermetallic coatings deposited on AISI 1045 steel

M. M. Verdian et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

Article Nanoscience & Nanotechnology

Synthesis of boron nitride nanotubes by boron ink annealing

Lu Hua Li et al.

NANOTECHNOLOGY (2010)

Review Chemistry, Physical

Laser ablation synthesis in solution and size manipulation of noble metal nanoparticles

Vincenzo Amendola et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2009)

Article Chemistry, Inorganic & Nuclear

Synthesis and characterization of metallic copper nanoparticles via thermal decomposition

Masoud Salavati-Niasari et al.

POLYHEDRON (2008)

Article Chemistry, Multidisciplinary

CVD synthesis of single-walled carbon nanotubes from gold nanoparticle catalysts

Sreekar Bhaviripudi et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2007)

Article Physics, Applied

Nanoparticle synthesis by ionizing source gas in chemical vapor deposition

M Adachi et al.

JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS (2003)