Related references
Note: Only part of the references are listed.Structural and electrochemical trends in mixed manganese oxides Nax(M0.44Mn0.56)O2 (M = Mn, Fe, Co, Ni) for sodium-ion battery cathode
Chol-Jun Yu et al.
JOURNAL OF POWER SOURCES (2021)
Dual-Manipulation on P2-Na0.67Ni0.33Mn0.67O2 Layered Cathode toward Sodium-Ion Full Cell with Record Operating Voltage Beyond 3.5 V
Bo Peng et al.
ENERGY STORAGE MATERIALS (2021)
Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery
Chenchen Wang et al.
NATURE COMMUNICATIONS (2021)
Shape-Induced Kinetics Enhancement in Layered P2-Na0.67Ni0.33Mn0.67O2 Porous Microcuboids Enables High Energy/Power Sodium-Ion Full Battery
Bo Peng et al.
BATTERIES & SUPERCAPS (2021)
Hierarchical Engineering of Porous P2-Na2/3Ni1/3Mn2/3O2 Nanofibers Assembled by Nanoparticles Enables Superior Sodium-Ion Storage Cathodes
Yongchang Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Revealing High Na-Content P2-Type Layered Oxides as Advanced Sodium-Ion Cathodes
Chenglong Zhao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)
Revisiting the Na2/3Ni1/3Mn2/3O2 Cathode: Oxygen Redox Chemistry and Oxygen Release Suppression
Yi Zhang et al.
ACS CENTRAL SCIENCE (2020)
Na-ion versus Li-ion Batteries: Complementarity Rather than Competitiveness
Jean-Marie Tarascon
JOULE (2020)
Vitalization of P2-Na2/3Ni1/3Mn2/3O2 at high-voltage cyclability via combined structural modulation for sodium-ion batteries
Yangyang Huang et al.
ENERGY STORAGE MATERIALS (2020)
Oxygen redox activity with small voltage hysteresis in Na0.67Cu0.28Mn0.72O2 for sodium-ion batteries
Wei Zheng et al.
ENERGY STORAGE MATERIALS (2020)
Visualizing the growth process of sodium microstructures in sodium batteries by in-situ23Na MRI and NMR spectroscopy
Yuxuan Xiang et al.
NATURE NANOTECHNOLOGY (2020)
Sodium-Ion Batteries Paving the Way for Grid Energy Storage
Hayley S. Hirsh et al.
ADVANCED ENERGY MATERIALS (2020)
A Novel Ni-rich O3-Na[Ni0.60Fe0.25M 0.15]O2 Cathode for Na-ion Batteries
Feixiang Ding et al.
ENERGY STORAGE MATERIALS (2020)
Electrochemical Performance Optimization of Layered P2-Type Na0.67MnO2 through Simultaneous Mn-Site Doping and Nanostructure Engineering
Bo Peng et al.
BATTERIES & SUPERCAPS (2020)
A New P2-Type Layered Oxide Cathode with Extremely High Energy Density for Sodium-Ion Batteries
Jang-Yeon Hwang et al.
ADVANCED ENERGY MATERIALS (2019)
A Novel Bifunctional Self-Stabilized Strategy Enabling 4.6 V LiCoO2 with Excellent Long-Term Cyclability and High-Rate Capability
Longlong Wang et al.
ADVANCED SCIENCE (2019)
Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6V
Jie-Nan Zhang et al.
NATURE ENERGY (2019)
Lowering Charge Transfer Barrier of LiMn2O4 via Nickel Surface Doping To Enhance Li+ Intercalation Kinetics at Subzero Temperatures
Wei Zhang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Dopant Segregation Boosting High-Voltage Cyclability of Layered Cathode for Sodium Ion Batteries
Kuan Wang et al.
ADVANCED MATERIALS (2019)
Na+-Conductive Na2Ti3O7-Modified P2-type Na2/3Ni1/3Mn2/3O2 via a Smart in Situ Coating Approach: Suppressing Na+/Vacancy Ordering and P2-O2 Phase Transition
Rongbin Dang et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
A Hydrostable Cathode Material Based on the Layered P2@P3 Composite that Shows Redox Behavior for Copper in High-Rate and Long-Cycling Sodium-Ion Batteries
Zichao Yan et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Manganese based layered oxides with modulated electronic and thermodynamic properties for sodium ion batteries
Kai Zhang et al.
NATURE COMMUNICATIONS (2019)
A P2/P3 composite layered cathode for high-performance Na-ion full batteries
Ya-Nan Zhou et al.
NANO ENERGY (2019)
Modulating the Interlayer Spacing and Na+/Vacancy Disordering of P2-Na0.67MnO2 for Fast Diffusion and High-Rate Sodium Storage
Da Tie et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Facile self-templated synthesis of P2-type Na0.7CoO2 microsheets as a long-term cathode for high-energy sodium-ion batteries
Bo Peng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
P2-type Na2/3Ni1/3Mn2/3O2 as a cathode material with high-rate and long-life for sodium ion storage
Qiannan Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Nature of the Z-phase in layered Na-ion battery cathodes
James W. Somerville et al.
ENERGY & ENVIRONMENTAL SCIENCE (2019)
High Energy Density Sodium-Ion Battery with Industrially Feasible and Air-Stable O3-Type Layered Oxide Cathode
Jianqiu Deng et al.
ADVANCED ENERGY MATERIALS (2018)
High voltage structural evolution and enhanced Na-ion diffusion in P2-Na2/3Ni1/3-xMgxMn2/3O2 ( 0 r x r 0.2) cathodes from diffraction, electrochemical and ab initio studies
Nuria Tapia-Ruiz et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Bioinspired Surface Layer for the Cathode Material of High-Energy-Density Sodium-Ion Batteries
Chang-Heum Jo et al.
ADVANCED ENERGY MATERIALS (2018)
Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping
Qi Liu et al.
NATURE ENERGY (2018)
Stable cycling of high-voltage lithium metal batteries in ether electrolytes
Shuhong Jiao et al.
NATURE ENERGY (2018)
Na+/vacancy disordering promises high-rate Na-ion batteries
Peng-Fei Wang et al.
SCIENCE ADVANCES (2018)
Advanced P2-Na2/3Ni1/3Mn7/12Fe1/12O2 Cathode Material with Suppressed P2-O2 Phase Transition toward High-Performance Sodium-Ion Battery
Qiong Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Phase transition induced cracking plaguing layered cathode for sodium-ion battery
Kuan Wang et al.
NANO ENERGY (2018)
High performance manganese-based layered oxide cathodes: overcoming the challenges of sodium ion batteries
Nagore Ortiz-Vitoriano et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries
Hu-Rong Yao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Origin of Enhanced Capacity Retention of P2-Type Na2/3Ni1/3-xMn2/3CuxO2 for Na-Ion Batteries
Kei Kubota et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Copper-substituted Na0.67Ni0.3-xCuxMn0.7O2 cathode materials for sodium-ion batteries with suppressed P2-O2 phase transition
Lei Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Microsphere Na0.65[Ni0.17Co0.11Mn0.72]O2 Cathode Material for High-Performance Sodium-Ion Batteries
Tae-Yeon Yu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Suppressing the P2-O2 Phase Transition of Na0.67Mn0.67Ni0.33O2 by Magnesium Substitution for Improved Sodium-Ion Batteries
Peng-Fei Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)
An advanced high-energy sodium ion full battery based on nanostructured Na2Ti3O7/VOPO4 layered materials
Hongsen Li et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
P2-Type Na0.67Ni0.23Mg0.1Mn0.67O2 as a High-Performance Cathode for a Sodium-Ion Battery
Huidan Hou et al.
INORGANIC CHEMISTRY (2016)
Improved Electrochemical Performance of Fe-Substituted NaNi0.5Mn0.5O2 Cathode Materials for Sodium-Ion Batteries
Ding D. Yuan et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Prototype Sodium-Ion Batteries Using an Air-Stable and Co/Ni-Free O3-Layered Metal Oxide Cathode
Linqin Mu et al.
ADVANCED MATERIALS (2015)
A Layered P2-and O3-Type Composite as a High-Energy Cathode for Rechargeable Sodium-Ion Batteries
Shaohua Guo et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
P2-type Na0.66Ni0.33-xZnxMn0.67O2 as new high-voltage cathode materials for sodium-ion batteries
Xuehang Wu et al.
JOURNAL OF POWER SOURCES (2015)
P2-Na0.6[Cr0.6Ti0.4]O2 cation-disordered electrode for high-rate symmetric rechargeable sodium-ion batteries
Yuesheng Wang et al.
NATURE COMMUNICATIONS (2015)
Fe-Based Tunnel-Type Na0.61[Mn0.27 Fe0.34 Ti0.39]O2 Designed by a New Strategy as a Cathode Material for Sodium-Ion Batteries
Shuyin Xu et al.
ADVANCED ENERGY MATERIALS (2015)
Air-Stable Copper-Based P2-Na7/9Cu2/9Fe1/9Mn2/3O2 as a New Positive Electrode Material for Sodium-Ion Batteries
Yunming Li et al.
ADVANCED SCIENCE (2015)
P2-type Na2/3Ni1/3Mn2/3-xTixO2 as a new positive electrode for higher energy Na-ion batteries
Hiroaki Yoshida et al.
CHEMICAL COMMUNICATIONS (2014)
P2-type Na0.67Mn0.65Fe0.2Ni0.15O2 Cathode Material with High-capacity for Sodium-ion Battery
Dingding Yuan et al.
ELECTROCHIMICA ACTA (2014)
P2-NaxMn1/2Fe1/2O2 Phase Used as Positive Electrode in Na Batteries: Structural Changes Induced by the Electrochemical (De)intercalation Process
Benoit Mortemard de Boisse et al.
INORGANIC CHEMISTRY (2014)
High Performance Na0.5[Ni0.23Fe0.13Mn0.63]O2 Cathode for Sodium-Ion Batteries
Ivana Hasa et al.
ADVANCED ENERGY MATERIALS (2014)
An advanced cathode for Na-ion batteries with high rate and excellent structural stability
Dae Hoe Lee et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
High-capacity antimony sulphide nanoparticle-decorated graphene composite as anode for sodium-ion batteries
Denis Y. W. Yu et al.
NATURE COMMUNICATIONS (2013)
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Naoaki Yabuuchi et al.
NATURE MATERIALS (2012)
In situ X-ray diffraction study of P2-Na2/3[Ni1/3Mn2/3]O2
ZH Lu et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)