4.8 Article

15.71% Efficiency All-Small-Molecule Organic Solar Cells Based on Low-Cost Synthesized Donor Molecules

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Optimized Active Layer Morphologies via Ternary Copolymerization of Polymer Donors for 17.6 % Efficiency Organic Solar cells with Enhanced Fill Factor

Xia Guo et al.

Summary: In this study, a ternary copolymerization approach was used to develop a new terpolymer donor PM6-Tz20 with improved active layer morphology, leading to enhanced PCE in OSCs. By replacing Al with Ag as the cathode, the champion PCE was further improved, demonstrating the effectiveness of molecular design strategy in optimizing OSC performance.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Multidisciplinary Sciences

Pseudo-bilayer architecture enables high-performance organic solar cells with enhanced exciton diffusion length

Kui Jiang et al.

Summary: High-efficiency OSCs with a pseudo-bilayer architecture and optimized ternary system exhibit longer exciton diffusion length and higher power conversion efficiency. The pseudo-bilayer architecture shows excellent potential for future OSC applications.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Over 15% efficiency all-small-molecule organic solar cells enabled by a C-shaped small molecule donor with tailorable asymmetric backbone

Xunchang Wang et al.

Summary: This study introduces two C-shaped SM donors with asymmetric central cores, which exhibit matched absorption and energy levels with the acceptor Y6, leading to outstanding power conversion efficiency in ASM-OSCs. The asymmetric core design allows the SM donor to easily penetrate neighboring Y6 molecules, preventing rapid aggregation and large domains of single components in blends. This innovative approach paves the way for highly efficient ASM-OSCs.

NANO ENERGY (2021)

Article Chemistry, Physical

High-Efficiency All-Polymer Solar Cells with Poly-Small-Molecule Acceptors Having π-Extended Units with Broad Near-IR Absorption

Ning Su et al.

Summary: Two new poly-small-molecule acceptors, PYN-BDT and PYN-BDTF, with p-extended naphthalene rings, demonstrated broad optical cross-section macromolecular absorbers in all-polymer solar cells, leading to enhanced power conversion efficiencies. The blend morphology, GIWAXS, charge transport, exciton and carrier dynamics, and impedance-based analysis show that extending individual polymer acceptor blocks represents an efficient strategy to achieve high-performance cells with enhanced metrics.

ACS ENERGY LETTERS (2021)

Article Chemistry, Multidisciplinary

A New Conjugated Polymer that Enables the Integration of Photovoltaic and Light-Emitting Functions in One Device

Ye Xu et al.

Summary: This study demonstrates the design and application of a new wide-bandgap polymer, PBQx-TCl, in photovoltaic and light-emitting devices. Devices fabricated with nonfullerene acceptors show high power conversion efficiency under various lighting conditions, showcasing the potential of PBQx-TCl-based devices in both photovoltaic and light-emitting functions.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Multi-Selenophene-Containing Narrow Bandgap Polymer Acceptors for All-Polymer Solar Cells with over 15 % Efficiency and High Reproducibility

Qunping Fan et al.

Summary: The newly developed multi-selenophene-containing PSMA material PFY-3Se shows outstanding performance in all-polymer solar cells, with high efficiency, low energy loss, and good batch-to-batch reproducibility, indicating great potential for practical applications.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Enhancing the performances of all-small-molecule ternary organic solar cells via achieving optimized morphology and 3D charge pathways

Yanhong Chang et al.

Summary: The introduction of IDIC with weak crystallinity in the H11/IDIC-4F system led to the successful construction of a high-efficiency ternary ASM-OSC, optimizing the phase separation morphology and charge transport pathways, resulting in enhanced current density and fill factor.

CHINESE CHEMICAL LETTERS (2021)

Article Chemistry, Physical

Balancing the efficiency, stability, and cost potential for organic solar cells via a new figure of merit

Wenyan Yang et al.

Summary: The research found that as the thickness of the active layer of organic solar cells decreases, the thermal stability gradually increases, leading to the development of a new industrial index, i-FOM2.0, which helps address the balance between efficiency, stability, and cost, and accelerates the commercialization of OSCs.

JOULE (2021)

Article Chemistry, Multidisciplinary

Asymmetric Isomer Effects in Benzo[c ][1,2,5]thiadiazole-Fused Nonacyclic Acceptors: Dielectric Constant and Molecular Crystallinity Control for Significantly Photovoltaic Performance Enhancement

Wei Gao et al.

Summary: By systematically exploring asymmetric isomer effects, new non-acyclic electron acceptors were designed and synthesized to significantly improve the power conversion efficiency of organic solar cells. The asymmetric isomerization strategy effectively inhibits molecular aggregation and unfavorable orientations, leading to more efficient dissociation and optimized microstructure, resulting in a remarkably higher PCE.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

A Well-Mixed Phase Formed by Two Compatible Non-Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6%

Yunhao Cai et al.

Summary: The ternary strategy of incorporating a third component into a binary blend has led to highly efficient organic solar cells with unprecedented power conversion efficiency values.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Small-molecular donor guest achieves rigid 18.5% and flexible 15.9% efficiency organic photovoltaic via fine-tuning microstructure morphology

Zhenyu Chen et al.

Summary: Incorporating highly ordered crystalline small molecules into host binary systems has been shown to significantly improve the photovoltaic performance of organic solar cells. By designing and synthesizing small molecular donors with similar chemical structures, it was found that the silicon-containing G19 exhibited a higher degree of order in the host system, resulting in improved power conversion efficiency.

JOULE (2021)

Article Chemistry, Multidisciplinary

Highly efficient ITO-free organic solar cells with a column-patterned microcavity

Jiang Huang et al.

Summary: This study has achieved high-performance ITO-free organic solar cells through the incorporation of a newly designed column-patterned microcavity (CPM) for effective optical confinement of thin near-infrared BHJs. By utilizing optical interference, light scattering and local surface plasmons of patterned electrodes, the photocurrent density of OSCs was significantly improved for thin BHJs with near 100 nm thickness.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Non-Fullerene Organic Solar Cells Based on Benzo[1,2-b:4,5-b′]difuran-Conjugated Polymer with 14% Efficiency

Xueshan Li et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Flexible All-Solution-Processed Organic Solar Cells with High-Performance Nonfullerene Active Layers

Lulu Sun et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

Yong Cui et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

High-Performance All-Polymer Solar Cells: Synthesis of Polymer Acceptor by a Random Ternary Copolymerization Strategy

Jiaqi Du et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Materials Science, Multidisciplinary

15.3% efficiency all-small-molecule organic solar cells enabled by symmetric phenyl substitution

Jinzhao Qin et al.

SCIENCE CHINA-MATERIALS (2020)

Review Chemistry, Multidisciplinary

A-DA'D-A non-fullerene acceptors for high-performance organic solar cells

Qingya Wei et al.

SCIENCE CHINA-CHEMISTRY (2020)

Article Chemistry, Multidisciplinary

15.34% efficiency all-small-molecule organic solar cells with an improved fill factor enabled by a fullerene additive

Dingqin Hu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Review Chemistry, Multidisciplinary

Towards the commercialization of colloidal quantum dot solar cells: perspectives on device structures and manufacturing

Hyunho Lee et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Chemistry, Multidisciplinary

Molecular design of a non-fullerene acceptor enables aP3HT-based organic solar cell with 9.46% efficiency

Chenyi Yang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Chemistry, Multidisciplinary

Breaking 12% efficiency in flexible organic solar cells by using a composite electrode

Guang Zeng et al.

SCIENCE CHINA-CHEMISTRY (2019)

Article Chemistry, Multidisciplinary

17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS2 as a Replacement for PEDOT:PSS

Yuanbao Lin et al.

ADVANCED MATERIALS (2019)

Review Chemistry, Physical

Flexible and Semitransparent Organic Solar Cells

Yaowen Li et al.

ADVANCED ENERGY MATERIALS (2018)

Article Nanoscience & Nanotechnology

Semitransparent Flexible Organic Solar Cells Employing Doped-Graphene Layers as Anode and Cathode Electrodes

Dong Hee Shin et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Over 14% Efficiency in Polymer Solar Cells Enabled by a Chlorinated Polymer Donor

Shaoqing Zhang et al.

ADVANCED MATERIALS (2018)

Article Multidisciplinary Sciences

A low cost and high performance polymer donor material for polymer solar cells

Chenkai Sun et al.

NATURE COMMUNICATIONS (2018)

Article Chemistry, Multidisciplinary

Ternary solar cells with a mixed face-on and edge-on orientation enable an unprecedented efficiency of 12.1%

Tanya Kumari et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Chemistry, Multidisciplinary

9.73% Efficiency Nonfullerene All Organic Small Molecule Solar Cells with Absorption-Complementary Donor and Acceptor

Haijun Bin et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Chemistry, Multidisciplinary

Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells

Wenchao Zhao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

Article Chemistry, Multidisciplinary

Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells

Yankang Yang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Review Chemistry, Physical

Benzo[1,2-b: 4,5-b′]dithiophene (BDT)-based small molecules for solution processed organic solar cells

Miaomiao Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Nanoscience & Nanotechnology

Molecular Weight Dependence of the Morphology in P3HT:PCBM Solar Cells

Feng Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Chemistry, Multidisciplinary

Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture

Florian Machui et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)