Related references
Note: Only part of the references are listed.One-component order parameter in URu2Si2 uncovered by resonant ultrasound spectroscopy and machine learning
Sayak Ghosh et al.
SCIENCE ADVANCES (2020)
Sparse thermal data for cellular automata modeling of grain structure in additive manufacturing
Matthew Rolchigo et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2020)
Accelerated discovery of oxidation resistant CoNi-base γ/γ' alloys with high L12 solvus and low density
Colin A. Stewart et al.
MATERIALS & DESIGN (2020)
Assessment of grain structure evolution with resonant ultrasound spectroscopy in additively manufactured nickel alloys
Jeff Rossin et al.
MATERIALS CHARACTERIZATION (2020)
A defect-resistant Co-Ni superalloy for 3D printing
Sean P. Murray et al.
NATURE COMMUNICATIONS (2020)
Representation of Hashin-Shtrikman Bounds in Terms of Texture Coefficients for Arbitrarily Anisotropic Polycrystalline Materials
Mauricio Lobos Fernandez et al.
JOURNAL OF ELASTICITY (2019)
A Preview of the US Air Force Research Laboratory Additive Manufacturing Modeling Challenge Series
Michael Groeber et al.
JOM (2018)
Bayesian inference of elastic properties with resonant ultrasound spectroscopy
Ben Bales et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2018)
Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification
S. S. Babu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
Y. Kok et al.
MATERIALS & DESIGN (2018)
Effect of scanning strategy on texture formation in Ni-25 at.% Mo alloys fabricated by selective laser melting
Shi-Hai Sun et al.
MATERIALS & DESIGN (2018)
Geometry-Induced Spatial Variation of Microstructure Evolution During Selective Electron Beam Melting of Rene-N5
Curtis Lee Frederick et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Rapid measurement of volumetric texture using resonant ultrasound spectroscopy
Bo Lan et al.
SCRIPTA MATERIALIA (2018)
Additive manufacturing process monitoring and control by non-destructive testing techniques: challenges and in-process monitoring
Q. Y. Lu et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2018)
Homogenization and Materials Design of Anisotropic Multiphase Linear Elastic Materials Using Central Model Functions
Mauricio Lobos et al.
JOURNAL OF ELASTICITY (2017)
Forward models for extending the mechanical damage evaluation capability of resonant ultrasound spectroscopy
B. R. Goodlet et al.
ULTRASONICS (2017)
Uncertainty Quantification of Microstructural Properties due to Experimental Variations
Pinar Acar et al.
AIAA JOURNAL (2017)
Impact of grain shape on the micromechanics-based extraction of single-crystalline elastic constants from polycrystalline samples with crystallographic texture
Masakazu Tane et al.
ACTA MATERIALIA (2017)
Microstructural Control of Additively Manufactured Metallic Materials
P. C. Collins et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Efficient Sequential Monte-Carlo Samplers for Bayesian Inference
Thi Le Thu Nguyen et al.
IEEE TRANSACTIONS ON SIGNAL PROCESSING (2016)
On optimal zeroth-order bounds of linear elastic properties of multiphase materials and application in materials design
Mauricio Lobos et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Mohsen Seifi et al.
JOM (2016)
Processability of different IN738LC powder batches by selective laser melting
Roman Engeli et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Grain structure evolution in Inconel 718 during selective electron beam melting
H. Helmer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Bayesian normal modes identification and estimation of elastic coefficients in resonant ultrasound spectroscopy
Simon Bernard et al.
INVERSE PROBLEMS (2015)
Resonant ultrasound spectroscopy for materials with high damping and samples of arbitrary geometry
Marcel C. Remillieux et al.
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2015)
Site specific control of crystallographic grain orientation through electron beam additive manufacturing
R. R. Dehoff et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Representation of Hashin-Shtrikman bounds of cubic crystal aggregates in terms of texture coefficients with application in materials design
Thomas Boehlke et al.
ACTA MATERIALIA (2014)
Determination of All 21 Independent Elastic Coefficients of Generally Anisotropic Solids by Resonant Ultrasound Spectroscopy: Benchmark Examples
P. Sedlak et al.
EXPERIMENTAL MECHANICS (2014)
The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
Luke N. Carter et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Uncertainty Quantification in Prediction of the In-Plane Young's Modulus of Thin Films With Fiber Texture
Pedro J. Madrid et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2014)
An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
Amanda S. Wu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Measurement of uncertainty in orientation distribution function calculations
A. Creuziger et al.
SCRIPTA MATERIALIA (2014)
Application of laser-based resonant ultrasound spectroscopy to study texture in copper
David H. Hurley et al.
JOURNAL OF APPLIED PHYSICS (2012)
Sensitivity of the resonant ultrasound spectroscopy to weak gradients of elastic properties
Hanus Seiner et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2012)
Application of ultrasonic methods to determine elastic anisotropy of polycrystalline copper processed by equal-channel angular pressing
Hanus Seiner et al.
ACTA MATERIALIA (2010)
Explicit bounds of effective stiffness tensors for textured aggregates of cubic crystallites
Mojia Huang et al.
MATHEMATICS AND MECHANICS OF SOLIDS (2008)
Texture simulation based on tensorial Fourier coefficients
Thomas Boehlke
COMPUTERS & STRUCTURES (2006)
Sequential Monte Carlo samplers
Pierre Del Moral et al.
JOURNAL OF THE ROYAL STATISTICAL SOCIETY SERIES B-STATISTICAL METHODOLOGY (2006)
Advanced resonant ultrasound spectroscopy for measuring anisotropic elastic constants of thin films
H Ogi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2005)
Using finite element method for the determination of elastic moduli by resonant ultrasound spectroscopy
J Plesek et al.
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA (2004)
Resonant Ultrasound Spectroscopy: theory and application
BJ Zadler et al.
GEOPHYSICAL JOURNAL INTERNATIONAL (2004)