4.8 Article

Freestanding Ti3C2Tx MXene/Prussian Blue Analogues Films with Superior Ion Uptake for Efficient Capacitive Deionization by a Dual Pseudocapacitance Effect

Related references

Note: Only part of the references are listed.
Article Engineering, Chemical

Controlled synthesis of NaTi2(PO4)3/Carbon composite derived from Metal-organic-frameworks as highly-efficient electrodes for hybrid capacitive deionization

Kai Wang et al.

Summary: This study investigated the influence of surface morphology of NaTi2(PO4)3/carbon composites on their desalination performance, finding that the cube/sphere-shaped NTP/C exhibited the highest desalination capacity and outstanding long-term stability. These results demonstrate the significant impact of surface morphology on the performance of HCDI electrodes.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Review Chemistry, Physical

Hexacyanoferrate-Type Prussian Blue Analogs: Principles and Advances Toward High-Performance Sodium and Potassium Ion Batteries

Aijun Zhou et al.

Summary: This review discusses the research progress on HCF-type cathode materials, focusing on their structural features, redox mechanisms, synthesis control, and modification strategies for improved performance in NIBs and KIBs. The use of HCFs in these battery systems offers specific capacity and voltage advantages, with ongoing efforts to enhance their material properties and promote future design of PBAs for advanced rechargeable batteries.

ADVANCED ENERGY MATERIALS (2021)

Article Engineering, Environmental

Ti3C2 MXenes-derived NaTi2(PO4)3/MXene nanohybrid for fast and efficient hybrid capacitive deionization performance

Zeqiu Chen et al.

Summary: The design and synthesis of NTP/MXene nanohybrid with improved electrical conductivity and enhanced sodium-insertion ability led to extraordinary desalination performance, showing promising applications for practical HCDI with a maximum deionization rate of 29.6 mg g(-1) min(-1, an ultrahigh desalination capacity of 128.6 mg g(-1), and stable cycling desalination ability.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Boosting the Pseudocapacitive and High Mass-Loaded Lithium/Sodium Storage through Bonding Polyoxometalate Nanoparticles on MXene Nanosheets

Huixia Chao et al.

Summary: The study introduces an electrode material made of Mo and Fe-based polyoxometalates bonded on MXene nanosheets, enabling high rate-capable and high mass-loaded lithium/sodium storage. The optimized structure delivers high capacity even under high mass loadings, with kinetic analysis revealing significant capacity contributions.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

3D Porous Oxidation-Resistant MXene/Graphene Architectures Induced by In Situ Zinc Template toward High-Performance Supercapacitors

Xue Yang et al.

Summary: A fast and efficient self-assembly route was demonstrated to prepare a 3D porous oxidation-resistant MXene/graphene composite, which effectively prevents the oxidation and self-restacking of MXene, ensuring outstanding electrical conductivity, specific capacitance, and cycling stability. This work paves a new avenue to solve the long-standing challenges of MXene.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Core-Shell MOF@COF Motif Hybridization: Selectively Functionalized Precursors for Titanium Dioxide Nanoparticle-Embedded Nitrogen-Rich Carbon Architectures with Superior Capacitive Deionization Performance

Xiaohong Liu et al.

Summary: The directed core-shell motif hybridization of COFs on MOFs results in selectively functionalized carbonaceous precursors, TiO2@COF, with titanium dioxide nanoparticles in the inner core and nitrogen-rich carbon in the outer shell. This design provides abundant faradic active sites and nitrogen dopants, as well as favorable cycling stability and enhanced pseudocapacitive capacity. Additionally, the interconnected COF-derived fibers contribute to increasing electrical conductivity of the material, leading to a high salt adsorption capacity and favorable cycling stability for CDI electrodes.

CHEMISTRY OF MATERIALS (2021)

Article Engineering, Chemical

A novel butter-sandwich Ti3C2Tx/PANI/PPY electrode with enhanced adsorption capacity and recyclability toward asymmetric capacitive deionization

Xiaoyan Yang et al.

Summary: This study presents a novel Ti3C2Tx/PANI/PPY electrode with a butter-sandwich microstructure, exhibiting high salt adsorption capacity, fast salt adsorption rate, and cycling stability in capacitive deionization. The outstanding CDI performance is achieved by the intercalation and binding effects, providing a new direction for enhancing CDI performance.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Hierarchical Co3O4/CNT decorated electrospun hollow nanofiber for efficient hybrid capacitive deionization

Lu Guo et al.

Summary: The cathode material, Co3O4@CNF@CNT, prepared using an unscalable electrospinning method, showed excellent pseudocapacitive performance and high rate performance, leading to improved salt adsorption capacity and rate in the HCDI system.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Review Chemistry, Physical

Accommodating diverse ions in Prussian blue analogs frameworks for rechargeable batteries: The electrochemical redox reactions

Longtao Ma et al.

Summary: Prussian blue analogs (PBAs) show great potential as electrode materials for various rechargeable batteries, offering highly reversible insertion/removal of ions in both aqueous and non-aqueous electrolytes. However, challenges like limited electrochemical utilization of PBAs framework need to be addressed for further development.

NANO ENERGY (2021)

Article Engineering, Environmental

Novel MoS2/NOMC electrodes with enhanced capacitive deionization performances

Shichao Tian et al.

Summary: This study successfully synthesized MoS2/NOMC composite with enhanced performance, showing efficient desalination performance driven mainly by the capacitor-controlled process and exhibiting excellent regeneration capability.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Chemical

MnO2 decorated porous carbon derived from Enteromorpha prolifera as flow-through electrode for dual-mode capacitive deionization

Yong Liu et al.

Summary: A low-cost EP-derived MnO2-decorated activated carbon composite has been designed as electrodes for high-performance dual-mode capacitive deionization, showing excellent desalination performance. The material is cost-effective and easy to fabricate, offering a sustainable strategy to alleviate the marine ecological crisis caused by bio-waste.

DESALINATION (2021)

Review Chemistry, Multidisciplinary

Recent Advances in Faradic Electrochemical Deionization: System Architectures versus Electrode Materials

Yong Liu et al.

Summary: Traditional carbon-based CDI systems have low desalination capacity, and research has shifted towards the development of faradic electrochemical desalination systems using faradic materials. Focus is primarily on faradic reactions and materials, yet the correlation between faradic materials and system architectures remains relatively unexplored.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

In Situ Carbon Insertion in Laminated Molybdenum Dioxide by Interlayer Engineering Toward Ultrastable Rocking-Chair Zinc-Ion Batteries

Bo Wang et al.

Summary: By incorporating carbon layers into MoO2 materials, the structural integrity and electrochemical performance of aqueous zinc-ion batteries have been enhanced, resulting in excellent cycling stability and rate capability.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Flexible MXene Framework as a Fast Electron/Potassium-Ion Dual-Function Conductor Boosting Stable Potassium Storage in Graphite Electrodes

Bin Cao et al.

Summary: The use of Ti3C2Tx MXene nanosheets as a conductor in all-integrated graphite nanoflake/MXene electrodes greatly enhances potassium storage performance, exhibiting impressive cyclability and high energy/power densities. This design also provides new insights into phase transition mechanisms and demonstrates the potential for efficient potassium storage anodes.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Ternary g-C3N4/TiO2/Ti3C2 MXene S-scheme heterojunction photocatalysts for NOx removal under visible light

Xueshan Hu et al.

Summary: Highly efficient composite photocatalysts were prepared by annealing partially oxidized Ti3C2 MXene with melamine under N-2 flow. The ternary g-C3N4/TiO2/Ti3C2 MXene photocatalyst significantly enhanced electron-hole separation and achieved high NOx removal efficiency. This work demonstrates that moderately oxidized Ti3C2 MXene is a good candidate for high-performance air purification photocatalysts.

APPLIED SURFACE SCIENCE (2021)

Article Engineering, Chemical

High-performance desalination of three-dimensional nitrogen-doped carbon framework reinforced Prussian blue in capacitive deionization

Ao Gong et al.

Summary: By embedding iron-based Prussian blue (FeHCF) in a three-dimensional nitrogen-doped carbon framework (3DNC), the synergistic effect of both composites enhances the electrochemical performance for capacitive deionization. The FeHCF@3DNC electrode shows high desalination capacity and excellent cycling stability with lower energy consumption compared to other materials. XPS analysis confirms the major role of Fe3+/Fe2+ couple in the desalination and regeneration processes.

DESALINATION (2021)

Editorial Material Chemistry, Physical

Na3(VO)2(PO4)2F nanocuboids/graphene hybrid materials as faradic electrode for extra-high desalination capacity

Siyang Xing et al.

Summary: The hybrid capacitive deionization (HCDI) using modified NASICON material shows superior desalination performance, with high deionization capacity, low energy consumption, and excellent energy recovery rate.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Physical

High-Capacity and Kinetically Accelerated Lithium Storage in MoO3 Enabled by Oxygen Vacancies and Heterostructure

Yingying Zhang et al.

Summary: The MoO3-x/MXene heterostructure, fabricated by introducing oxygen vacancies and MXene nanosheets, exhibits excellent lithium-ion storage performances due to accelerated ion diffusion kinetics, enhanced electrical conductivity, and additional active sites induced by oxygen vacancies as well as robust interfacial contact. This composite shows a high reversible capacity of 1258 mAh g(-1) at 0.1 A g(-1) for Li-ion storage and retains 474 mAh g(-1) at 10 A g(-1), remarkably higher than previously reported MoO3-based anode materials. The composite also achieves an unparalleled energy density of 330 Wh kg(-1) when assembled with commercial LiFePO4 into a full LIB.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Graphene-carbon 2D heterostructures with hierarchically-porous P,N-doped layered architecture for capacitive deionization

Jingru Guo et al.

Summary: Through the assembly of metal-organic framework nanoparticles, a hierarchically porous N,P-doped carbon-graphene 2D heterostructure (NPC/rGO) with outstanding deionization performance was fabricated, exhibiting superior performance compared to the commercial benchmark and most previously reported carbon materials in capacitive deionization applications.

CHEMICAL SCIENCE (2021)

Article Chemistry, Physical

Nitrogen, phosphorus co-doped eave-like hierarchical porous carbon for efficient capacitive deionization

Hao Zhang et al.

Summary: This study introduces a novel N, P co-doped eave-like hierarchical porous carbon (NP-EHPC) for capacitive deionization (CDI), showing high desalination capacity and long cycling stability. The work offers new insights into the design of high-performance carbon materials for desalination of brackish water.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Physical

Enabling superior hybrid capacitive deionization performance in NASICON-structured Na3MnTi(PO4)3/C by incorporating a two-species redox reaction

Shiyong Wang et al.

Summary: In this study, a Na3MnTi(PO4)(3)/C (NTMP/C) composite was prepared via a sol-gel-calcination method and used as a faradaic electrode in hybrid capacitive deionization (HCDI) for the first time. The NTMP/C composite showed a high ion removal capacity, ultrafast ion removal rate, and excellent cycle stability, making it a promising alternative faradaic electrode material for CDI applications.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Physical

Highly efficient atomically dispersed Co-N active sites in porous carbon for high-performance capacitive desalination of brackish water

Silu Huo et al.

Summary: Porous carbons with highly efficient atomically dispersed Co-N active sites were successfully designed and prepared for outstanding performance in capacitive deionization. Experimental and theoretical analysis confirmed the crucial role of atomically dispersed Co-N bonds as effective active sites in ion adsorption behavior and porous structure utilization.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Physical

Structurally and chemically engineered graphene for capacitive deionization

Liang Chang et al.

Summary: Graphene plays a crucial role in CDI, providing superior ion adsorption conditions and electrical conductivity. By enhancing graphene through structural and chemical engineering, the ion removal capacity and rate can be improved, as well as the charge efficiency and ion selectivity.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Chemistry, Multidisciplinary

Recent advances in ion selectivity with capacitive deionization

J. G. Gamaethiralalage et al.

Summary: This review summarizes the mechanisms and advancements in selective ion removal using different electrode materials in multicomponent solutions. The review covers progress in preparation, theoretical understanding, and ion selectivity definitions, as well as introduces a theory for intercalation materials that considers mixtures of different cations.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

Carbon-incorporated Fe3O4 nanoflakes: high-performance faradaic materials for hybrid capacitive deionization and supercapacitors

Lei Chen et al.

Summary: A new synthesis strategy using urea to create carbon-incorporated 2D Fe3O4 nanoflakes under solvothermal conditions has been developed, showing high specific capacitance and energy density. The structural advantages and carbon incorporation enable faster charge transfer, making it suitable for high-performance capacitive applications in supercapacitors and desalination.

MATERIALS CHEMISTRY FRONTIERS (2021)

Review Multidisciplinary Sciences

A Brief Review on High-Performance Capacitive Deionization Enabled by Intercalation Electrodes

Zhenzhen Liu et al.

Summary: The article summaries the recent progress in various sodium ion intercalation materials as highly-efficient CDI electrodes, and proposes an outlook on the future development of ion intercalation electrodes.

GLOBAL CHALLENGES (2021)

Article Chemistry, Multidisciplinary

3D Graphene-Based Macrostructures for Water Treatment

Haitao Wang et al.

ADVANCED MATERIALS (2020)

Article Nanoscience & Nanotechnology

MXene as a Cation-Selective Cathode Material for Asymmetric Capacitive Deionization

Bingbing Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Engineering, Chemical

Capacitive deionization with MoS2/g-C3N4 electrodes

Shichao Tian et al.

DESALINATION (2020)

Review Nanoscience & Nanotechnology

Charge-transfer materials for electrochemical water desalination, ion separation and the recovery of elements

Pattarachai Srimuk et al.

NATURE REVIEWS MATERIALS (2020)

Review Chemistry, Multidisciplinary

3D MXene Architectures for Efficient Energy Storage and Conversion

Ke Li et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Physical

High-Mass-Loading Porous Ti3C2Tx Films for Ultrahigh-Rate Pseudocapacitors

Jing Kong et al.

ACS ENERGY LETTERS (2020)

Article Chemistry, Physical

3D carbon-coated MXene architectures with high and ultrafast lithium/sodium-ion storage

Peng Zhang et al.

ENERGY STORAGE MATERIALS (2020)

Article Green & Sustainable Science & Technology

A sunlight-responsive metal-organic framework system for sustainable water desalination

Ranwen Ou et al.

NATURE SUSTAINABILITY (2020)

Review Chemistry, Multidisciplinary

Faradaic Electrodes Open a New Era for Capacitive Deionization

Qian Li et al.

ADVANCED SCIENCE (2020)

Article Chemistry, Physical

Flexible freestanding all-MXene hybrid films with enhanced capacitive performance for powering a flex sensor

Zhemin Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Physical

Porous nitrogen-doped MXene-based electrodes for capacitive deionization

Ahmad Amiri et al.

ENERGY STORAGE MATERIALS (2020)

Article Engineering, Chemical

Mesoporous carbon derived from ZIF-8 for high efficient electrosorption

Tie Gao et al.

DESALINATION (2019)

Article Engineering, Environmental

Membrane-Free Hybrid Capacitive Deionization System Based on Redox Reaction for High-Efficiency NaCl Removal

Shiyong Wang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Chemistry, Multidisciplinary

Three-Dimensional Nanoarchitecture of Carbon Nanotube-Interwoven Metal-Organic Frameworks for Capacitive Deionization of Saline Water

Xingtao Xu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Chemistry, Multidisciplinary

MXene-Bonded Flexible Hard Carbon Film as Anode for Stable Na/K-Ion Storage

Ning Sun et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Ultrafast Sodium Full Batteries Derived from X-Fe (X = Co, Ni, Mn) Prussian Blue Analogs

Peng Ge et al.

ADVANCED MATERIALS (2019)

Article Engineering, Environmental

Capacitive deionization using nitrogen-doped mesostructured carbons for highly efficient brackish water desalination

Xingtao Xu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Nanoscience & Nanotechnology

A Study of MnO2 with Different Crystalline Forms for Pseudocapacitive Desalination

Zhi Yi Leong et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Multidisciplinary

Prussian White Hierarchical Nanotubes with Surface-Controlled Charge Storage for Sodium-Ion Batteries

Wenhao Ren et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Review Chemistry, Physical

Faradaic reactions in capacitive deionization for desalination and ion separation

Fei Yu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Multidisciplinary

Enhancing the capacitive deionization performance of NaMnO2 by interface engineering and redox-reaction

Shiyong Wang et al.

ENVIRONMENTAL SCIENCE-NANO (2019)

Article Nanoscience & Nanotechnology

3D Porous MXene (Ti3C2)/Reduced Graphene Oxide Hybrid Films for Advanced Lithium Storage

Zhiying Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Engineering, Environmental

Energy consumption in capacitive deionization - Constant current versus constant voltage operation

J. E. Dykstra et al.

WATER RESEARCH (2018)

Article Chemistry, Multidisciplinary

Two-Dimensional Molybdenum Carbide (MXene) with Divacancy Ordering for Brackish and Seawater Desalination via Cation and Anion Intercalation

Pattarachai Srimuk et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Article Chemistry, Physical

BCN nanosheets templated by g-C3N4 for high performance capacitive deionization

Shiyong Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Multidisciplinary

Improved capacitive deionization by using 3D intercalated graphene sheet-sphere nanocomposite architectures

Zaheen Ullah Khan et al.

ENVIRONMENTAL SCIENCE-NANO (2018)

Article Chemistry, Physical

Porous Cryo-Dried MXene for Efficient Capacitive Deionization

Weizhai Bao et al.

JOULE (2018)

Article Chemistry, Physical

MXene as a novel intercalation-type pseudocapacitive cathode and anode for capacitive deionization

Pattarachai Srimuk et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Multidisciplinary

Energy consumption and constant current operation in membrane capacitive deionization

R. Zhao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)