☆ 4.8 Article

Multifunctional Heterocyclic-Based Spacer Cation for Efficient and Stable 2D/3D Perovskite Solar Cells

ACS APPLIED MATERIALS & INTERFACES (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

N-methyl-2-pyrrolidone Iodide as Functional Precursor Additive for Record Efficiency 2D Ruddlesden-Popper (PEA)2(Cs)n-1PbnI3n+1 Solar Cells

Zhizai Li et al.

Summary: By incorporating precursor additive N-methyl-2-pyrrolidone iodide (NMPI), the crystallization rate of 2D perovskite film can be efficiently regulated, leading to improved efficiency and stability of perovskite solar cells. The additive forms hydrogen bonds with substances in the precursor, resulting in smooth morphology and reduced trap-density.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Optics

Efficient and bright white light-emitting diodes based on single-layer heterophase halide perovskites

Jiawei Chen et al.

Summary: Halide perovskite LEDs are a new type of white light-emitting diode that utilizes efficient and low-cost lighting technologies, featuring a single broadband emissive layer without the need for phosphors. These LEDs operate with high peak luminance and external quantum efficiency, with potential for further improvements in the future through advancements in fabrication technology and mechanistic understanding.

NATURE PHOTONICS (2021)

Add to Collection

Article Chemistry, Physical

Defect Suppression in Oriented 2D Perovskite Solar Cells with Efficiency over 18% via Rerouting Crystallization Pathway

Yi Yang et al.

Summary: A new crystallization pathway (RCP) is reported to suppress defects in vertically oriented 2D perovskite films, leading to highly homogeneous and stable films with improved optoelectronic properties. By controlling the adsorption of additives on crystal planes, large grains are encouraged to form, ultimately enhancing the performance of solar cells.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Add to Collection

Article Multidisciplinary Sciences

Out-of-equilibrium processes in crystallization of organic-inorganic perovskites during spin coating

Shambhavi Pratap et al.

Summary: The authors explain the stochastic transformation processes during the spin coating of perovskite colloidal precursors. They report the structure and properties of transient and stable phases formed during the process, revealing mechanistic insights through in situ data.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Spacer Engineering Using Aromatic Formamidinium in 2D/3D Hybrid Perovskites for Highly Efficient Solar Cells

Tingting Liu et al.

Summary: The study demonstrates that aromatic spacers play a crucial role in 2D/3D hybrid perovskites, improving crystalline growth and orientation, reducing defect states, and enhancing spatially resolved carrier lifetime.

ACS NANO (2021)

Add to Collection

Article Chemistry, Physical

Mixed-Phase Low-Dimensional Perovskite-Assisted Interfacial Lead Directional Management for Stable Perovskite Solar Cells with Efficiency over 24%

Guozhen Liu et al.

Summary: The study successfully tackled the impact of Pb-based defects on the efficiency and stability of perovskite solar cells by designing a low-dimensional perovskite (LDP) using an amphoteric heterocyclic cation. This approach led to increased efficiency and overall stability of the devices, opening up new possibilities for practical application in the field of perovskite photovoltaic devices through directional management of Pb-based interface defects.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Trap State Passivation by Rational Ligand Molecule Engineering toward Efficient and Stable Perovskite Solar Cells Exceeding 23% Efficiency

Lihua Zhu et al.

Summary: Nonradiative recombination losses caused by trap states at the surface and grain boundaries hinder the enhancement of power conversion efficiency and stability in perovskite solar cells. The introduction of 11MA additive successfully improves crystallinity, reduces trap state density, and inhibits ion migration, leading to simultaneous improvement in efficiency and stability. The device with 11MA additive achieves significantly higher PCE and maintains a high level of efficiency after aging for 3000 hours under ambient conditions.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Bonding Strength Regulates Anchoring-Based Self-Assembly Monolayers for Efficient and Stable Perovskite Solar Cells

Erpeng Li et al.

Summary: Anchoring-based self-assembly using strong anchoring groups can improve the assembly rate, density, and compactness of monolayers for perovskite solar cells, leading to enhanced charge collection and suppressed interfacial recombination. Prototype PSCs based on optimal monolayers achieved a high PCE of 21.43% and maintained 90% of initial PCE after three months, demonstrating the practical utility of the ASA strategy for scaling-up.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Sulfonate-Assisted Surface Iodide Management for High-Performance Perovskite Solar Cells and Modules

Ruihao Chen et al.

Summary: Surface iodide management using cesium sulfonate can stabilize lead halide perovskite surfaces, reduce surface defects and nonradiative recombination, and improve the efficiency and stability of perovskite solar cells.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Multidisciplinary Sciences

Lead halide-templated crystallization of methylamine-free perovskite for efficient photovoltaic modules

Tongle Bu et al.

Summary: Efficient and stable perovskite layers are crucial for the commercialization of perovskite solar cells. A lead halide-templated crystallization strategy has been developed to print formamidinium-cesium lead triiodide perovskite films, achieving high-quality large-area films with controlled nucleation and growth. An unencapsulated device with 23% efficiency and excellent long-term thermal stability has been achieved, showcasing the potential for practical application in the future.

SCIENCE (2021)

Add to Collection

Article Multidisciplinary Sciences

Stabilizing perovskite-substrate interfaces for high-performance perovskite modules

Shangshang Chen et al.

Summary: The study found that DMSO liquid additive trapped in perovskite-substrate interfaces during film formation led to voids, accelerating film degradation. Partial replacement of DMSO with solid-state carbohydrazide reduced interfacial voids and increased stability. Blade-coated p-i-n structure PSCs achieved a maximum PCE of 23.6% without efficiency loss after stability tests, demonstrating improved efficiency and stability with the new approach.

SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Halogen-halogen bonds enable improved long-term operational stability of mixed-halide perovskite photovoltaics

Xinliang Fu et al.

Summary: The introduction of halogen-halogen bonds at the phase interface successfully suppresses ion migration in mixed-halide perovskite, leading to a stable and efficient photovoltaic device. Encapsulated devices exhibit long-term stability and high performance, offering a new solution to the stability challenges of perovskite materials.

CHEM (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Interface Engineering by Thiazolium Iodide Passivation Towards Reduced Thermal Diffusion and Performance Improvement in Perovskite Solar Cells

Manuel Salado et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

2-Methylimidazole as an interlayer for the enhancement of the open-circuit voltage in perovskite solar cells

Deli shen et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Optics

Efficient and stable Ruddlesden-Popper perovskite solar cell with tailored interlayer molecular interaction

Hui Ren et al.

NATURE PHOTONICS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Revealing the Role of Methylammonium Chloride for Improving the Performance of 2D Perovskite Solar Cells

Fei Zheng et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Intermolecular π-π Conjugation Self-Assembly to Stabilize Surface Passivation of Highly Efficient Perovskite Solar Cells

Hongshi Li et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Improvement of Colloidal Characteristics in a Precursor Solution by a PbI2-(DMSO)2 Complex for Efficient Nonstoichiometrically Prepared CsPbI2.8Br0.2 Perovskite Solar Cells

Hang Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Engineering, Chemical

Highly efficient and stable perovskite solar cells with strong hydrophobic barrier via introducing poly(vinylidene fluoride) additive

Haiying Zheng et al.

Journal of Energy Chemistry (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Band-bending induced passivation: high performance and stable perovskite solar cells using a perhydropoly(silazane) precursor

Hiroyuki Kanda et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Two-dimensional triphenylene cored hole-transporting materials for efficient perovskite solar cells

Wangchao Chen et al.

CHEMICAL COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Scalable Methylamine Gas Healing Strategy for High-Efficiency Inorganic Perovskite Solar Cells

Zhipeng Shao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Charge Transport in 2D Perovskites via Fluorination of Organic Cation

Fei Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Layered Ruddlesden-Popper Efficient Perovskite Solar Cells with Controlled Quantum and Dielectric Confinement Introduced via Doping

Hao Li et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Benefiting from Spontaneously Generated 2D/3D Bulk-Heterojunctions in Ruddlesden-Popper Perovskite by Incorporation of S-Bearing Spacer Cation

Yajie Yan et al.

ADVANCED SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

The Role of Bulk and Interface Recombination in High-Efficiency Low-Dimensional Perovskite Solar Cells

Shanshan Zhang et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

4-(Aminoethyl)pyridine as a Bifunctional Spacer Cation for Efficient and Stable 2D Ruddlesden-Popper Perovskite Solar Cells

Yaru Li et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Efficient Planar Heterojunction FA1-xCsxPbI3 Perovskite Solar Cells with Suppressed Carrier Recombination and Enhanced Open Circuit Voltage via Anion-Exchange Process

Jing Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Reduced Defects of MAPbI3 Thin Films Treated by FAI for High-Performance Planar Perovskite Solar Cells

Yuqin Zou et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Enabling room-temperature processed highly efficient and stable 2D Ruddlesden-Popper perovskite solar cells with eliminated hysteresis by synergistic exploitation of additives and solvents

Shuang Yu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Electrons, Excitons, and Phonons in Two-Dimensional Hybrid Perovskites: Connecting Structural, Optical, and Electronic Properties

Daniel B. Straus et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Thermodynamically Self-Healing 1D-3D Hybrid Perovskite Solar Cells

Jiandong Fan et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Highly Efficient Ruddlesden-Popper Halide Perovskite PA(2)MA(4)Pb(5)I(16) Solar Cells

Peirui Cheng et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Two-Dimensional Ruddlesden-Popper Perovskite with Nanorod-like Morphology for Solar Cells with Efficiency Exceeding 15%

Hongtao Lai et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Dual Functions of Crystallization Control and Defect Passivation Enabled by Sulfonic Zwitterions for Stable and Efficient Perovskite Solar Cells

Xiaopeng Zheng et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Phase Pure 2D Perovskite for High-Performance 2D-3D Heterostructured Perovskite Solar Cells

Pengwei Li et al.

ADVANCED MATERIALS (2018)

Add to Collection

Review Multidisciplinary Sciences

Dimensionality engineering of hybrid halide perovskite light absorbers

Peng Gao et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Vapor-fumigation for record efficiency two-dimensional perovskite solar cells with superior stability

Xuejie Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Add to Collection

Article Chemistry, Physical

Temperature-assisted rapid nucleation: a facile method to optimize the film morphology for perovskite solar cells

Ying-Ke Ren et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Inducing swift nucleation morphology control for efficient planar perovskite solar cells by hot-air quenching

Seulki Song et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Energy & Fuels

Efficient ambient-air-stable solar cells with 2D-3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites

Zhiping Wang et al.

NATURE ENERGY (2017)

Add to Collection

Article Energy & Fuels

Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations

Xiaopeng Zheng et al.

NATURE ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Charge Collection with Passivation Layers in Perovskite Solar Cells

Yong Hui Lee et al.

ADVANCED MATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Thermal degradation of CH3NH3PbI3 perovskite into NH3 and CH3I gases observed by coupled thermogravimetry-mass spectrometry analysis

Emilio J. Juarez-Perez et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Multidisciplinary Sciences

High-efficiency two-dimensional Ruddlesden-Popper perovskite solar cells

Hsinhan Tsai et al.

NATURE (2016)

Add to Collection

Article Multidisciplinary Sciences

Efficient luminescent solar cells based on tailored mixed-cation perovskites

Dongqin Bi et al.

SCIENCE ADVANCES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Transformation of the Excited State and Photovoltaic Efficiency of CH3NH3PbI3 Perovskite upon Controlled Exposure to Humidified Air

Jeffrey A. Christians et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications

Duyen H. Cao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Article Chemistry, Physical

Optical absorption, charge separation and recombination dynamics in Sn/Pb cocktail perovskite solar cells and their relationships to photovoltaic performances

Qing Shen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process

Qi Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

Charge transfer and recombination at the metal oxide/CH3NH3PbClI2/spiro-OMeTAD interfaces: uncovering the detailed mechanism behind high efficiency solar cells

Qing Shen et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection

Article Multidisciplinary Sciences

Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells

Tomas Leijtens et al.

NATURE COMMUNICATIONS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.