☆ 4.8 Article

Black Phase of Inorganic Perovskite Stabilized with Carboxyimidazolium Iodide for Stable and Efficient Inverted Perovskite Solar Cells

ACS APPLIED MATERIALS & INTERFACES (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Spontaneous Construction of Multidimensional Heterostructure Enables Enhanced Hole Extraction for Inorganic Perovskite Solar Cells to Exceed 20% Efficiency

Shiang Zhang et al.

Summary: By forming a Ruddlesden-Popper 2D (n = 1) perovskite structure on the surface of CsPbI3-xBrx, the efficiency of the solar cell can be significantly improved, energy loss reduced, surface trap density decreased, charge lifetime extended, hole extraction efficiency increased, and severe interfacial nonradiative charge recombination minimized.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Rational Surface-Defect Control via Designed Passivation for High-Efficiency Inorganic Perovskite Solar Cells

Xiaojing Gu et al.

Summary: Iodine vacancies and undercoordinated Pb2+ are the main causes of nonradiative charge recombination in all-inorganic perovskite films, while passivation with histamine (HA) significantly reduces surface trap density and prolongs charge lifetime, leading to an increased solar cell efficiency.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-Efficiency Perovskite Solar Cells with Imidazolium-Based Ionic Liquid for Surface Passivation and Charge Transport

Xuejie Zhu et al.

Summary: In this study, DMIMPF6 ionic liquid was used to passivate surface defects of perovskite, resulting in increased solar cell efficiency and enhanced long-term stability of the device.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Chemistry, Applied

Surface passivation using pyridinium iodide for highly efficient planar perovskite solar cells

Yitian Du et al.

Summary: The use of an organic halide salt to passivate surface defects in perovskite solar cells resulted in improved efficiency and stability, with the treated device achieving higher performance compared to untreated and differently treated devices in the same experimental conditions.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Modifying Surface Termination of CsPbI3 Grain Boundaries by 2D Perovskite Layer for Efficient and Stable Photovoltaics

Tiantian Liu et al.

Summary: In order to improve the performance of all-inorganic perovskite solar cells, an ultra-thin 2D perovskite is used to terminate CsPbI3 grain boundaries, enhancing charge-carrier extraction and transport while effectively suppressing nonradiative recombination.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Chemistry, Physical

Ionic liquid reducing energy loss and stabilizing CsPbI2Br solar cells

Aili Wang et al.

Summary: The use of the ionic liquid BMIMBF4 can stabilize the CsPbI2Br phase and reduce surface defect density, leading to improvements in perovskite film quality and interfacial charge transport.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient (>20 %) and Stable All-Inorganic Cesium Lead Triiodide Solar Cell Enabled by Thiocyanate Molten Salts

Bingcheng Yu et al.

Summary: By developing a UAT molten salt modification strategy, high-quality CsPbI3 films have been successfully deposited with significantly improved crystal quality, leading to a cell efficiency of over 20% and excellent stability over 1000 hours. These results demonstrate a promising development route for CsPbI3-related photoelectric devices.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Add to Collection

Article Chemistry, Physical

Enhanced Efficiency of Inorganic CsPbI3-xBrx Perovskite Solar Cell via Self-Regulation of Antisite Defects

Zhun Yao et al.

Summary: The study investigates the impact of deep defects on the performance of all-inorganic CsPbI3-xBrx perovskite solar cells and their formation mechanisms. Experimental results show a significant reduction in defect concentrations after resting, and analysis using density functional theory and reaction thermodynamics reveals related mechanisms.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Molten-Salt-Assisted CsPbI3 Perovskite Crystallization for Nearly 20%-Efficiency Solar Cells

Jingru Zhang et al.

Summary: The molten-salt-assisted crystallization (MSAC) strategy improves grain growth of all-inorganic perovskite films by changing the crystallization pathways with the introduction of molten salt. This results in high-quality films with desired optical and electrical properties. Compared to traditional solvent annealing, MSAC enables more intensive mass transfer and higher efficiency in producing films with champion steady-state output efficiency and high open-circuit voltage.

ADVANCED MATERIALS (2021)

Add to Collection

Review Chemistry, Physical

Defects in CsPbX3 Perovskite: From Understanding to Effective Manipulation for High-Performance Solar Cells

Jingru Zhang et al.

Summary: The rapid development of inorganic metal perovskite materials, such as CsPbX3, shows great potential for top-cells in tandem junctions due to their thermal stability and adjustable band gap. However, the efficiency of CsPbX3 perovskite solar cells still needs improvement due to defects. Research on defect passivation in CsPbX3 PSCs is summarized, including discussions on defect physics, tolerance, self-healing, and techniques for defect identification and manipulation for enhancing photoelectric properties.

SMALL METHODS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Chemically Stable Black Phase CsPbI3Inorganic Perovskites for High-Efficiency Photovoltaics

Yong Wang et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

An Efficient Approach to Fabricate Air-Stable Perovskite Solar Cells via Addition of a Self-Polymerizing Ionic Liquid

Rui Xia et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Multidisciplinary Sciences

Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction

Amran Al-Ashouri et al.

SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Stabilizing γ-CsPbI3 Perovskite via Phenylethylammonium for Efficient Solar Cells with Open-Circuit Voltage over 1.3 V

Qiufeng Ye et al.

SMALL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Polymeric room-temperature molten salt as a multifunctional additive toward highly efficient and stable inverted planar perovskite solar cells

Shuangjie Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Conjugated polyelectrolyte with potassium cations enables inverted perovskite solar cells with an efficiency over 20%

Luozheng Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Review Chemistry, Multidisciplinary

A review: crystal growth for high-performance all-inorganic perovskite solar cells

Weijie Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Vacancy-Driven Stabilization of the Cubic Perovskite Polymorph of CsPbI3

Yun-Hyok Kye et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient and Stable CsPbI3 Solar Cells via Regulating Lattice Distortion with Surface Organic Terminal Groups

Tianhao Wu et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Pyridine-Terminated Conjugated Organic Molecules as an Interfacial Hole Transfer Bridge for NiOx-Based Perovskite Solar Cells

Haoliang Cheng et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Multidisciplinary Sciences

Planar perovskite solar cells with long-term stability using ionic liquid additives

Sai Bai et al.

NATURE (2019)

Add to Collection

Article Multidisciplinary Sciences

Thermal unequilibrium of strained black CsPbI3 thin films

Julian A. Steele et al.

SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Thermodynamically stabilized β-CsPbI3-based perovskite solar cells with efficiencies >18%

Yong Wang et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

An imidazolium iodide salt as a bifunctional co-adsorbent for quasi-solid-state dye-sensitized solar cells: improvements of electron lifetime and charge collection efficiency

Haoliang Cheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Skillfully deflecting the question: a small amount of piperazine-1,4-diium iodide radically enhances the thermal stability of CsPbI3 perovskite

Hailiang Wang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Chemical stability and instability of inorganic halide perovskites

Yuanyuan Zhou et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Two-step growth of CsPbI3-xBrx films employing dynamic CsBr treatment: toward all-inorganic perovskite photovoltaics with enhanced stability

Bhaskar Parida et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress of inorganic perovskite solar cells

Qidong Tai et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Solvent-controlled growth of inorganic perovskite films in dry environment for efficient and stable solar cells

Pengyang Wang et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Bifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics

Yong Wang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Editorial Material Chemistry, Physical

Hysteresis Index: A Figure without Merit for Quantifying Hysteresis in Perovskite Solar Cells

Severin N. Habisreutinger et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Physical

Efficient α-CsPbI3 Photovoltaics with Surface Terminated Organic Cations

Yong Wang et al.

JOULE (2018)

Add to Collection

Article Energy & Fuels

Zn0.8Cd0.2S@PCBM Hybrid as an Efficient Electron Transport Layer for Air-Processed p-i-n Planar Perovskite Solar Cells: Improvement of Interfacial Electron Transfer and Device Stability

Yaru Li et al.

SOLAR RRL (2018)

Add to Collection

Article Chemistry, Physical

Phenyl and thienyl functionalized imidazolium iodides for highly efficient quasi-solid-state dye-sensitized solar cells

Meirong Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Stabilizing the α-Phase of CsPbI3 Perovskite by Sulfobetaine Zwitterions in One-Step Spin-Coating Films

Qi Wang et al.

JOULE (2017)

Add to Collection

Article Chemistry, Physical

Bandgap-Tunable Cesium Lead Halide Perovskites with High Thermal Stability for Efficient Solar Cells

Rebecca J. Sutton et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

CsPblBr2 Perovskite Solar Cell by Spray-Assisted Deposition

Cho Fai Jonathan Lau et al.

ACS ENERGY LETTERS (2016)

Add to Collection

Article Chemistry, Physical

High-Performance All-Solid-State Dye-Sensitized Solar Cells Utilizing Imidazolium-Type Ionic Crystal as Charge Transfer Layer

Yong Zhao et al.

CHEMISTRY OF MATERIALS (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.