☆ 4.8 Article

Boosting Electrochemical Performance of Lithium-Rich Manganese-Based Cathode Materials through a Dual Modification Strategy with Defect Designing and Interface Engineering

ACS APPLIED MATERIALS & INTERFACES (2021)

Related references

Note: Only part of the references are listed.

Review Chemistry, Multidisciplinary

Reaction Mechanisms of Layered Lithium-Rich Cathode Materials for High-Energy Lithium-Ion Batteries

Shuoqing Zhao et al.

Summary: Layered lithium-rich cathode materials with high theoretical specific capacity have regained interest due to the increasing reliance on high-energy-density lithium-ion batteries. Research progress on the structure characterization and reaction mechanisms of these materials has been reviewed, focusing on both cationic and anionic redox reactions. The future development of lithium-rich cathode materials for next-generation lithium-ion batteries faces opportunities and challenges.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced Potassium-Ion Storage of the 3D Carbon Superstructure by Manipulating the Nitrogen-Doped Species and Morphology

Yanhua Li et al.

Summary: In this study, an eco-efficient synthetic route was developed to create carbon superstructures with enhanced nitrogen-rich active facets for improved potassium-ion storage capabilities. By regulating the nitrogen doping types and morphology, the performance of the carbon superstructures was significantly enhanced.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Sub‐2 nm Ultrathin and Robust 2D FeNi Layered Double Hydroxide Nanosheets Packed with 1D FeNi‐MOFs for Enhanced Oxygen Evolution Electrocatalysis (Adv. Funct. Mater. 43/2021)

Fuqin Zheng et al.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Coordination interaction boosts energy storage in rechargeable Al battery with a positive electrode material of CuSe

Gangyong Li et al.

Summary: In this study, a coordination adsorption strategy was employed using CuSe as a positive electrode material to enhance cycling stability and rate capability. Ex situ X-ray photoelectron spectroscopy revealed reversible redox reactions of Cu and Se species, while electron microscopy measurements showed capacity deterioration due to the dissolution of active Cu and Se species. Theoretical calculations identified strong coordination interaction between nitrogen-doped reduced graphene oxide and active species as key in suppressing shuttle effects and achieving excellent cycling stability.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Yttrium Surface Gradient Doping for Enhancing Structure and Thermal Stability of High-Ni Layered Oxide as Cathode for Li-Ion Batteries

Yang-Yang Wang et al.

Summary: The authors improved the structure and thermal stability of high-nickel layered oxides by introducing yttrium through surface gradient doping, leading to enhanced electrochemical performance. The yttrium-doped sample showed good capacity retention, potential stability, and superior thermal behavior, attributed to strong yttrium-oxygen bonding and a stable oxygen framework on the surface layer.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Modulating the Surface Ligand Orientation for Stabilized Anionic Redox in Li-Rich Oxide Cathodes

Yanchen Liu et al.

Summary: This study proposes a strategy to improve the reversibility of anionic redox by tuning the geometric shape of surface ligands, leading to significantly improved capacity and voltage retention in the cathode material of lithium-ion batteries.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Na-substitution induced oxygen vacancy achieving high transition metal capacity in commercial Li-rich cathode

Quanxin Ma et al.

Summary: This study proposes a method of creating surface oxygen vacancies and Na doping to enhance the structural stability of Li-rich layered Mn-based oxides (LLMOs), leading to improved electrochemical performance. The optimized Na0.1LLMO cathode material shows high initial coulombic efficiency and excellent cycling stability, voltage retention, and rate performance. Pouch cell investigation further confirms the practical applicability of Na-doped LLMO cathode materials on a larger scale.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Regeneration of degraded Li-rich layered oxide materials through heat treatment-induced transition metal reordering

Yixuan Li et al.

Summary: LRLO materials face voltage and capacity decay during electrochemical cycling, but can be recovered through heat treatment and re-lithiation. Transition metal reordering is identified as the key factor for structure recovery in degraded LRLO. This study offers promising strategies to mitigate voltage and capacity degradation in LRLO.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Boosting energy efficiency of Li-rich layered oxide cathodes by tuning oxygen redox kinetics and reversibility

Chong Yin et al.

Summary: This study focuses on the rational design of an energy-efficient Li-rich layered cathode with high energy, power density and cycling stability by tuning oxygen redox activity. The target material Li1.12Ni0.22Co0.13Mn0.52O2 shows ultra-high energy efficiency (90.6%) at 1C, high capacity (>200 mAh g(-1)) with 98.9% retention, and less than 150 mV of decay after 200 cycles. The compositional change greatly improves the oxygen redox kinetics and reversibility, leading to enhanced energy efficiency and narrowing the gap between scientific interest and practical application in oxygen-redox chemistry.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Facilitated Coating of Li3PO4 on the Rough Surface of LiNi0.85Co0.1Mn0.05O2 Cathodes by Synchronous Lithiation

Shaomin Li et al.

Summary: A LiNi0.85Co0.1Mn0.05O2 cathode material with a uniform Li3PO4 coating was successfully designed and fabricated, showing improved electrochemical performance with higher initial Coulombic efficiency, promising capacity retention, and favorable rate performance.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Suppressing the Voltage Decay Based on a Distinct Stacking Sequence of Oxygen Atoms for Li-Rich Cathode Materials

Shuang Cao et al.

Summary: F-doped O2-type Li-rich cathode materials exhibit excellent electrochemical performance, with high discharge specific capacity, high capacity retention, and good cycling stability, making them suitable for high-energy Li-ion batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Lithium-rich manganese-based cathode materials with highly stable lattice and surface enabled by perovskite-type phase-compatible layer

Han-xin Wei et al.

Summary: By modifying the surface of Li-rich Mn-based cathode materials with a perovskite-type LaMnO3 layer, the anion activity was effectively suppressed and cycle stability was improved, leading to enhanced electrochemical performance.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Tailoring bulk Li+ ion diffusion kinetics and surface lattice oxygen activity for high-performance lithium-rich manganese-based layered oxides

Ruizhi Yu et al.

Summary: This study presents a successful strategy to enhance the Li+ ion diffusivity of LRMOs by introducing Te6+ and forming a protective layer on the material surface to inhibit structural degradation. The modified material exhibits good cycling performance and rate capability, with significantly reduced voltage decay during cycling.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Encouraging Voltage Stability upon Long Cycling of Li-Rich Mn-Based Cathode Materials by Ta-Mo Dual Doping

Jiachao Yang et al.

Summary: In this study, Ta-Mo codoped Li1.2Ni0.13Co0.13Mn0.54O2 with high energy density was prepared and the effects of charge-discharge methods, bulk doping, and surface structure design on its electrochemical performances were systematically investigated. The results showed that the appropriate Ta and Ta-Mo doping increased Mn3+ concentration and suppressed Li/Ni mixing and oxygen defects. The Ta-Mo codoped cathode sample exhibited good capacity retention and low voltage fading rates, attributed to the highly valence Ta5+ and Mo6+ entering the crystal lattice and the strong bond energies of Ta-O and Mo-O helping to maintain the crystal structure.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Utilizing the different distribution habit of La and Zr in Li-rich Mn-based cathode to achieve fast lithium-ion diffusion kinetics

Wei He et al.

Summary: By utilizing the distribution habits of La3+ and Zr4+, the ionic conductivity and cycling performance of Li-rich Mn-based cathode materials have been improved. The modified cathode shows enhanced rate capability and Li+ diffusion coefficients, shedding light on how to improve the practical application of LRM cathodes.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Mesocrystallizing Nanograins for Enhanced Li+ Storage

Jingjie Liu et al.

Summary: The morphology and crystallinity of electrode materials play a crucial role in their charge carrier storage properties in rechargeable batteries. By designing electrode particles consisting of numerous nanograins with uniform crystalline orientation, both high surface area and high structural integrity can be achieved, significantly improving Li+ storage kinetics and performance. The mesocrystalline NiCo2O4 electrode exhibits a high specific capacity of 1403 mAh g(-1) after 200 cycles at 1.6 A g(-1) (a rate of 1.8 C), demonstrating the effectiveness of this strategy in enhancing battery performance.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Deep oxidization of glucose driven by 4-acetamido-TEMPO for a glucose fuel cell at room temperature†

Gangyong Li et al.

Summary: This study demonstrates a novel room-temperature glucose fuel cell with ACT as an anodic electrocatalyst, showing deep glucose oxidation capability and promising potential for application in sugar-based fuel cells.

CHEMICAL COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Faster Activation and Slower Capacity/Voltage Fading: A Bifunctional Urea Treatment on Lithium-Rich Cathode Materials

Tongen Lin et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Electrochemistry

Ni-rich LiNi0.8Co0.1Mn0.1O2 coated with Li-ion conductive Li3PO4 as competitive cathodes for high-energy-density lithium ion batteries

Wenheng Zhang et al.

ELECTROCHIMICA ACTA (2020)

Add to Collection

Article Chemistry, Physical

The roles of oxygen vacancies in electrocatalytic oxygen evolution reaction

Kaiyue Zhu et al.

NANO ENERGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Na2S Treatment and Coherent Interface Modification of the Li-Rich Cathode to Address Capacity and Voltage Decay

Kanghui Hu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Stabilized Co-Free Li-Rich Oxide Cathode Particles with An Artificial Surface Prereconstruction

Zhi Zhu et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

First-cycle voltage hysteresis in Li-rich 3dcathodes associated with molecular O2trapped in the bulk

Robert A. House et al.

NATURE ENERGY (2020)

Add to Collection

Article Chemistry, Applied

Enhanced high-temperature performance of Li-rich layered oxide via surface heterophase coating

Yuefeng Su et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Effect of fluorination and Li-excess on the Li migration barrier in Mn-based cathode materials

Zinab Jadidi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

The effect of oxygen vacancy and spinel phase integration on both anionic and cationic redox in Li-rich cathode materials

Qingyuan Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Local structure adaptability through multi cations for oxygen redox accommodation in Li-Rich layered oxides

Enyue Zhao et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Facile electrochemical phosphatization of Mn3O4 nanosheet arrays for supercapacitor with enhanced performance

Jiangyu Hao et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Insight of a Phase Compatible Surface Coating for Long-Durable Li-Rich Layered Oxide Cathode

Sijiang Hu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Enhanced activity for gas phase propylene oxide rearrangement to allyl alcohol by Au promotion of Li3PO4 catalyst

Xiangshuai Zhu et al.

JOURNAL OF SOLID STATE CHEMISTRY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Understanding the Effect of Atomic-Scale Surface Migration of Bridging Ions in Binding Li3PO4 to the Surface of Spinel Cathode Materials

Yida Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Tuning Anionic Redox Activity and Reversibility for a High-Capacity Li-Rich Mn-Based Oxide Cathode via an Integrated Strategy

Qingyuan Li et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Electrochemical Performance of Li-Rich Layered Cathode Materials by Combined Cr Doping and LiAlO2 Coating

Yunjian Liu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Cu3P as a novel cathode material for rechargeable aluminum-ion batteries

Gangyong Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Direct Visualization of the Reversible O2-/O- Redox Process in Li-Rich Cathode Materials

Xiang Li et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Origin of High Capacity and Poor Cycling Stability of Li-Rich Layered Oxides: A Long-Duration in Situ Synchrotron Powder Diffraction Study

Karin Kleiner et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Tuning oxygen vacancies in two-dimensional iron-cobalt oxide nanosheets through hydrogenation for enhanced oxygen evolution activity

Linzhou Zhuang et al.

NANO RESEARCH (2018)

Add to Collection

Review Energy & Fuels

Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries

Gaurav Assat et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Synchronous Tailoring Surface Structure and Chemical Composition of Li-Rich-Layered Oxide for High-Energy Lithium-Ion Batteries

Bing Wu et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

Understanding voltage decay in lithium-excess layered cathode materials through oxygen-centred structural arrangement

Seungjun Myeong et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Energy & Fuels

Evolution of redox couples in Li- and Mn-rich cathode materials and mitigation of voltage fade by reducing oxygen release

Enyuan Hu et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Controllable Solid Electrolyte Interphase in Nickel-Rich Cathodes by an Electrochemical Rearrangement for Stable Lithium-Ion Batteries

Junhyeok Kim et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Nanoscale characterization of charged/discharged lithium-rich thin film cathode by scanning probe microscopy techniques

Shan Yang et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Chemistry, Physical

Coating effect of LiFePO4 and Al2O3 on Li1.2Mn0.54Ni0.13Co0.13O2 cathode surface for lithium ion batteries

Bonani Seteni et al.

JOURNAL OF POWER SOURCES (2017)

Add to Collection

Article Multidisciplinary Sciences

Fundamental interplay between anionic/cationic redox governing the kinetics and thermodynamics of lithium-rich cathodes

Gaurav Assat et al.

NATURE COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Physical

High-Temperature Treatment of Li-Rich Cathode Materials with Ammonia: Improved Capacity and Mean Voltage Stability during Cycling

Evan M. Erickson et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

A chemically bonded NaTi2( PO4)3/rGO microsphere composite as a high-rate insertion anode for sodium-ion capacitors

Ha-Kyung Roh et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Effects of Fluorine and Chromium Doping on the Performance of Lithium-Rich Li1+XMO2 (M = Ni, Mn, Co) Positive Electrodes

Wei Kong Pang et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Facile formation of a Li3PO4 coating layer during the synthesis of a lithium-rich layered oxide for high-capacity lithium-ion batteries

Yongho Lee et al.

JOURNAL OF POWER SOURCES (2016)

Add to Collection

Article Multidisciplinary Sciences

Gas-solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries

Bao Qiu et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Chemistry, Physical

High rate and thermally stable Mn-rich concentration-gradient layered oxide microsphere cathodes for lithium-ion batteries

Zhen-Dong Huang et al.

ENERGY STORAGE MATERIALS (2016)

Add to Collection

Article Electrochemistry

Improved Electrochemical Performance and Thermal Stability of Li-excess Li1.18Co0.15Ni0.15Mn0.52O2 Cathode Material by Li3PO4 Surface Coating

Xiaofei Bian et al.

ELECTROCHIMICA ACTA (2015)

Add to Collection

Article Chemistry, Physical

An effective method to reduce residual lithium compounds on Ni-rich Li[Ni0.6Co0.2Mn0.2]O2 active material using a phosphoric acid derived Li3PO4 nanolayer

Chang-Heum Jo et al.

NANO RESEARCH (2015)

Add to Collection

Article Chemistry, Physical

Effects of inorganic salts on the morphological, structural, and electrochemical properties of prepared nickel-rich Li[Ni0.6Co0.2Mn0.2]O2

Ki Jae Kim et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Electrochemistry

Effect of Residual Lithium Compounds on Layer Ni-Rich Li[Ni0.7Mn0.3]O2

Dae-Hyun Cho et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2014)

Add to Collection

Article Chemistry, Physical

A New Spinel-Layered Li-Rich Microsphere as a High-Rate Cathode Material for Li-Ion Batteries

Dong Luo et al.

ADVANCED ENERGY MATERIALS (2014)

Add to Collection

Article Chemistry, Physical

TiO2-g-C3N4 composite materials for photocatalytic H2 evolution under visible light irradiation

Hongjian Yan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Add to Collection

Article Chemistry, Physical

Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide

Sasha Stankovich et al.

CARBON (2007)

Add to Collection

Article Electrochemistry

Synthesis and characterization of nanostructured 4.7 VLixMn1.5Ni0.5O4 spinels for high-power lithium-ion batteries

M. Kunduraci et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.