Related references
Note: Only part of the references are listed.Preparation and characterization of hot-melt extruded polycaprolactone-based filaments intended for 3D-printing of tablets
Laura Viidik et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2021)
3D printed bilayer tablet with dual controlled drug release for tuberculosis treatment
Atabak Ghanizadeh Tabriz et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Prediction of drug-carrier interactions of PLA and PLGA drug-loaded nanoparticles by molecular dynamics simulations
Pierluigi Stipa et al.
EUROPEAN POLYMER JOURNAL (2021)
Polymers for Extrusion-Based 3D Printing of Pharmaceuticals: A Holistic Materials-Process Perspective
Mohammad A. Azad et al.
PHARMACEUTICS (2020)
Characterization of ternary amorphous solid dispersion containing hypromellose phthalate and erythritol prepared by hot melt extrusion using melting point depression
Yuya Nishimoto et al.
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2020)
Hot-Melt Extrusion Process Fluctuations and Their Impact on Critical Quality Attributes of Filaments and 3D-Printed Dosage Forms
Hanna Ponsar et al.
PHARMACEUTICS (2020)
Predictive models of FDM 3D printing using experimental design based on pharmaceutical requirements for tablet production
Felipe Q. Pires et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)
The effect of triethyl citrate on the dispersibility and water vapor sorption behavior of polylactic acid/zeolite composites
Miji Lee et al.
POLYMER TESTING (2020)
Polymer Selection for Hot-Melt Extrusion Coupled to Fused Deposition Modelling in Pharmaceutics
Gabriela G. Pereira et al.
PHARMACEUTICS (2020)
Organic Salts Based on Isoniazid Drug: Synthesis, Bioavailability and Cytotoxicity Studies
Filipa Santos et al.
PHARMACEUTICS (2020)
Synthesis and structural characterization of cocrystals of isoniazid and cinnamic acid derivatives
Syed Muddassir Ali Mashhadi et al.
JOURNAL OF MOLECULAR STRUCTURE (2020)
The applicability of pharmaceutical polymeric blends for the fused deposition modelling (FDM) 3D technique: Material considerations-printability-process modulation, with consecutive effects on in vitro release, stability and degradation
Kinga Ilyes et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Precipitation of resveratrol-isoniazid and resveratrol-nicotinamide cocrystals by gas antisolvent
Alcidenio S. Pessoa et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2019)
The Digital Pharmacies Era: How 3D Printing Technology Using Fused Deposition Modeling Can Become a Reality
Maisa R. P. Araujo et al.
PHARMACEUTICS (2019)
3D printed oral theophylline doses with innovative 'radiator-like' design: Impact of polyethylene oxide (PEO) molecular weight
Abdullah Isreb et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
3D-Printed Isoniazid Tablets for the Treatment and Prevention of TuberculosisPersonalized Dosing and Drug Release
Heidi Oblom et al.
AAPS PHARMSCITECH (2019)
Abuse Deterrent Immediate Release Egg-Shaped Tablet (Egglets) Using 3D Printing Technology: Quality by Design to Optimize Drug Release and Extraction
Pavan Kumar Nukala et al.
AAPS PHARMSCITECH (2019)
Synthesis and Characterization of pH-Sensitive Inulin Conjugate of Isoniazid for Monocyte-Targeted Delivery
Franklin Afinjuomo et al.
PHARMACEUTICS (2019)
Thermal analysis used to guide the production of thymol and Lippia origanoides essential oil inclusion complexes with cyclodextrin
Felipe Q. Pires et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)
A 3D-printed patient-specific applicator guide for use in high-dose-rate interstitial brachytherapy for tongue cancer: a phantom study
Chang Heon Choi et al.
PHYSICS IN MEDICINE AND BIOLOGY (2019)
Adsorption and characterization of palygorskite-isoniazid nanohybrids
E. Carazo et al.
APPLIED CLAY SCIENCE (2018)
From 'fixed dose combinations' to 'a dynamic dose combiner': 3D printed bi-layer antihypertensive tablets
Muzna Sadia et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Solid state characterisation and taste masking efficiency evaluation of polymer based extrudates of isoniazid for paediatric administration
Alison V. Keating et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Mixture design applied in compatibility compounds
Ricardo Ferreira-Nunes et al.
JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS (2018)
Hot Melt Extrudates Formulated Using Design Space: One Simple Process for Both Palatability and Dissolution Rate Improvement
Lorena F. B. Malaquias et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Formulation development and process analysis of drug-loaded filaments manufactured via hot-melt extrusion for 3D-printing of medicines
Carolin Korte et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2018)
Development of a Simple Mechanical Screening Method for Predicting the Feedability of a Pharmaceutical FDM 3D Printing Filament
Jehad M. Nasereddin et al.
PHARMACEUTICAL RESEARCH (2018)
Predicting melt rheology for hot-melt extrusion by means of a simple Tg-measurement
Esther S. Bochmanri et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2017)
Anti-tuberculosis drug combination for controlled oral delivery using 3D printed compartmental dosage forms: From drug product design to in vivo testing
Natalja Genina et al.
JOURNAL OF CONTROLLED RELEASE (2017)
Use of mixture design in drug-excipient compatibility determinations: Thymol nanoparticles case study
Felipe Q. Pires et al.
JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS (2017)
Three-Dimensional Printing of Medicinal Products and the Challenge of Personalized Therapy
Lucia Zema et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2017)
Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
Lu Wang et al.
POLYMER (2017)
FDM 3D printing of modified drug-delivery systems using hot melt extrusion: a new approach for individualized therapy
Marcilio Cunha-Filho et al.
THERAPEUTIC DELIVERY (2017)
Microparticles prepared with 50-190 kDa chitosan as promising non-toxic carriers for pulmonary delivery of isoniazid
Paula M. Oliveira et al.
CARBOHYDRATE POLYMERS (2017)
Challenges and Strategies in Thermal Processing of Amorphous Solid Dispersions: A Review
Justin S. LaFountaine et al.
AAPS PHARMSCITECH (2016)
Preparation and characterization of isoniazid and lamivudine co-loaded polymeric microspheres
Gitu Pandey et al.
ARTIFICIAL CELLS NANOMEDICINE AND BIOTECHNOLOGY (2016)
Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review
Shady Farah et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Rheological and solid-state NMR assessments of copovidone/clotrimazole model solid dispersions
Fengyuan Yang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Adaptation of pharmaceutical excipients to FDM 3D printing for the fabrication of patient-tailored immediate release tablets
Muzna Sadia et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Thermal and mechanical properties of polystyrene modified with esters derivatives of 3-phenylprop-2-en-1-ol
Marta Worzakowska
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2015)
Polymorph Impact on the Bioavailability and Stability of Poorly Soluble Drugs
Roberta Censi et al.
MOLECULES (2015)
Biobased additive plasticizing Polylactic acid (PLA)
Mounira Maiza et al.
POLIMEROS-CIENCIA E TECNOLOGIA (2015)
Spectrophotometric, FTIR and theoretical studies of the charge-transfer complexes between isoniazid (pyridine-4-carboxylic acid hydrazide) and the acceptors (p-chloranil, chloranilic acid and tetracyanoethylene) in acetonitrile, their association constants, thermodynamic properties and other related properties
Seema Bagchi (Chattaraj) et al.
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY (2012)
A comparative uncertainty study of the purity assessment of chemical reference substances using differential scanning calorimetry (DSC) and mass balance method
Jia-Min Gao et al.
THERMOCHIMICA ACTA (2011)
Dissolution rate enhancement of the novel antitumoral β-lapachone by solvent change precipitation of microparticles
Marcilio S. S. Cunha-Filho et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2008)
LC and LC-MS study of stress decomposition behaviour of isoniazid and establishment of validated stability-indicating assay method
Hemant Bhutani et al.
JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS (2007)
Plasticizer effect on the melting and crystallization behavior of polyvinyl alcohol
J Jang et al.
POLYMER (2003)
Share Paper
