Related references
Note: Only part of the references are listed.Modulated ultrasonic elliptical vibration cutting for ductile-regime texturing of brittle materials with 2-D combined resonant and non-resonant vibrations
Jianjian Wang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Study on the characteristics of zirconia ceramic in three-dimensional ultrasonic vibration-assisted ELID internal grinding
Fan Chen et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2020)
Study on electroless composite plating for an Ni-P bond micro diamond wheel
Tianfeng Zhou et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Study on new method and mechanism of microcutting-etching of microlens array on 6H-SiC mold by combining single point diamond turning with ion beam etching
Tianfeng Zhou et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Manufacturing of multiscale structured surfaces
Ekkard Brinksmeier et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)
Generation of high-saturation two-level iridescent structures by vibration-assisted fly cutting
Yupeng He et al.
MATERIALS & DESIGN (2020)
Fabrication of structurally colored basso-relievo with modulated elliptical vibration texturing
Jianjian Wang et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)
Effect of Rotating Magnetic Field and Ultrasonic Vibration on Micro-EDM Process
Gurpreet Singh et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)
3D fabrication of spherical microlens arrays on concave and convex silica surfaces
Xiaohua Liu et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2019)
Micro-electrical discharge machining of micro-rods using tool electrodes with high electrical resistivity
Tomohiro Koyano et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)
Comparison of fly cutting and transverse planing for micropyramid array machining on nickel phosphorus plating
Xiaobin Dong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Modelling and experimental investigation on textured surface generation in vibration-assisted micro-milling
Wanqun Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Studying the effects of cutting parameters on burr formation and deformation of hierarchical micro-structures in ultra-precision raster milling
Wei Zhao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
An investigation in the ultra-precision fly cutting of freeform surfaces on brittle materials with high machining efficiency and low tool wear
Zhanwen Sun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Analysis of micro-rods machined using reverse micro-EDM
Amit Kumar Singh et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Modulated diamond cutting for the generation of complicated micro/nanofluidic channels
Zhiwei Zhu et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)
Direct-write grayscale lithography
Anya Grushina
ADVANCED OPTICAL TECHNOLOGIES (2019)
Fabrication of highly homogeneous and controllable nanogratings on silicon via chemical etching-assisted femtosecond laser modification
Ji Huang et al.
NANOPHOTONICS (2019)
Manufacturing technologies toward extreme precision
Zhiyu Zhang et al.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2019)
Towards atomic and close-to-atomic scale manufacturing
Fengzhou Fang et al.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2019)
Chatter stability in ultra-precision fly cutting considering tool wear effect
Kai Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Review on fast tool servo machining of optical freeform surfaces
Linlin Zhu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Construction and characterization of micro/nano-topography on titanium alloy formed by micro-milling and anodic oxidation
Yi Wan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Preparation of graphene-enhanced nickel-phosphorus composite films by ultrasonic-assisted electroless plating
Qian Yu et al.
APPLIED SURFACE SCIENCE (2018)
Longitudinal micro-waviness (LMW) formation mechanism on large optical surface during ultra-precision fly cutting
Maolu Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Experimental and analytical study of ultrasonic elliptical vibration cutting on AISI 1045 for sustainable machining of round-shaped microgroove pattern
Rendi Kurniawan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Ultraprecision cutting of single-crystal calcium fluoride for fabricating micro flow cells
Ryo Komiya et al.
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING (2018)
Generation of functional surfaces by using a simulation tool for surface prediction and micro structuring of cold-working steel with ultrasonic vibration assisted face milling
Richard Boerner et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Fabrication of spherical microlens array by combining lapping on silicon wafer and rapid surface molding
Xiaohua Liu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2018)
Servo scanning 3D micro EDM for array micro cavities using on-machine fabricated tool electrodes
Hao Tong et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2018)
Experimental study on impulse discharge machinability of concave micro-array using a micro-tip array electrode
Quanpeng He et al.
MACHINING SCIENCE AND TECHNOLOGY (2018)
Combination of thermal scanning probe lithography and ion etching to fabricate 3D silicon nanopatterns with extremely smooth surface
Y. Lisunova et al.
MICROELECTRONIC ENGINEERING (2018)
Fabrication of microlens array on 6H-SiC mold by an integrated microcutting-etching process
Tianfeng Zhou et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Superhydrophobic structures on 316L stainless steel surfaces machined by nanosecond pulsed laser
Yukui Cai et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
Investigate the initialization of materials removal and deformation in single point diamond fly cutting technique using multiscale method
Xuesong Han
AIP ADVANCES (2018)
Numerical modelling, simulation and fabrication of 3-D hemi-spherical convex micro features using Reverse Micro EDM
T. Roy et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Mechanism of burr accumulation and fracture pit formation in ultraprecision microgroove fly cutting of crystalline nickel phosphorus
Xiaobin Dong et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2018)
Microstructure of High-Performance Aluminum Alloy Surface Processed by the Single-Excitation Same-Frequency Longitudinal-Torsional Coupled Ultrasonic Vibration Milling
Chongyang Zhao et al.
MATERIALS (2018)
Moth eye-inspired anti-reflective surfaces for improved IR optical systems & visible LEDs fabricated with colloidal lithography and etching
Lesley W. Chan et al.
BIOINSPIRATION & BIOMIMETICS (2018)
Development of a novel 2D rotary ultrasonic texturing technique for fabricating tailored structures
Shaolin Xu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Microgroove machining on crystalline nickel phosphide plating by single-point diamond cutting
Yang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Investigation on an integrated approach to design and micro fly-cutting of micro-structured riblet surfaces
Feifei Jiao et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2017)
External aerodynamic force on an ultra-precision diamond fly-cutting machine tool for KDP crystal machining
Liang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Ductile machining of single-crystal silicon for microlens arrays by ultraprecision diamond turning using a slow tool servo
Mao Mukaida et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
A high-density, super-high-aspect-ratio microprobe array realized by high-frequency vibration assisted inverse micro w-EDM
Shun-Tong Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Development of a two-frequency, elliptical-vibration texturing device for surface texturing
Rendi Kurniawan et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Micro-pyramidal structure fabrication on polydimethylsiloxane (PDMS) by Si (100) KOH wet etching
Shinae Hwang et al.
JOURNAL OF THE KOREAN PHYSICAL SOCIETY (2017)
Vibration assisted wire electrochemical micro machining of array micro tools
Kun Xu et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Ultrasonic vibration assisted grinding of hard and brittle linear micro-structured surfaces
Bing Guo et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Plasmonic nano-printing: large-area nanoscale energy deposition for efficient surface texturing
Lei Wang et al.
LIGHT-SCIENCE & APPLICATIONS (2017)
Fabrication of Hexagonal Microlens Arrays on Single-Crystal Silicon Using the Tool-Servo Driven Segment Turning Method
Mao Mukaida et al.
MICROMACHINES (2017)
Sculpturing of single crystal silicon microstructures by elliptical vibration cutting
Jianguo Zhang et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Structural coloration of metallic surfaces with micro/nano-structures induced by elliptical vibration texturing
Yang Yang et al.
APPLIED SURFACE SCIENCE (2017)
Recent advances in ultrasonic-assisted machining for the fabrication of micro/nano-textured surfaces
Shaolin Xu et al.
FRONTIERS OF MECHANICAL ENGINEERING (2017)
Recent advancements in optical microstructure fabrication through glass molding process
Tianfeng Zhou et al.
FRONTIERS OF MECHANICAL ENGINEERING (2017)
A study of cutting factors affecting the generation of functional hierarchical rib array structure in ultra-precision raster milling
H. T. Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Fabrication of two-dimensional periodic structures on silicon after scanning irradiation with femtosecond laser multi-beams
An Pan et al.
APPLIED SURFACE SCIENCE (2016)
A high efficiency industrial polysilicon solar cell with a honeycomb-like surface fabricated by wet etching using a photoresist mask
Hong Zhang et al.
APPLIED SURFACE SCIENCE (2016)
Analysis of Machinable Structures and Their Wettability of Rotary Ultrasonic Texturing Method
Xu Shaolin et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2016)
Virtual spindle based tool servo diamond turning of discontinuously structured microoptics arrays
Suet To et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Development of a Non-Resonant 3D Elliptical Vibration Cutting Apparatus for Diamond Turning
J. Lin et al.
EXPERIMENTAL TECHNIQUES (2016)
A hybrid method for crackless and high-efficiency ultraprecision chamfering of KDP crystal
Dongsheng Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Review of micro/nano machining by utilizing elliptical vibration cutting
Jianguo Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
A review of fly cutting applied to surface generation in ultra-precision machining
S. J. Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Ultrasonic assisted grinding process with minimum quantity lubrication using oil-based nanofluids
M. M. Molaie et al.
JOURNAL OF CLEANER PRODUCTION (2016)
A novel diamond micro-/nano-machining process for the generation of hierarchical micro-/nano-structures
Zhiwei Zhu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2016)
A theoretical and experimental investigation of orthogonal slow tool servo machining of wavy microstructured patterns on precision rollers
L. B. Kong et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)
Ultra-Precision Machining of a Large Amplitude Sinusoidal Ring Surface Based on a Slow Tool Servo
Shijun Ji et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2016)
Synergetic effect of laser patterning and micro coining for controlled lubricant propagation
Andreas Rosenkranz et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2016)
Investigation of the effects of magnetic field on near-dry electrical discharge machining performance
Ahad Gholipoor et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Novel multi-aperture approach for miniaturized imaging systems
F. C. Wippermann et al.
MOEMS AND MINIATURIZED SYSTEMS XV (2016)
Ultra-slim 2D-and depth-imaging camera modules for mobile imaging
Andreas Brueckner et al.
MOEMS AND MINIATURIZED SYSTEMS XV (2016)
Theoretical and experimental investigation on the novel end-fly-cutting-servo diamond machining of hierarchical micro-nanostructures
Zhiwei Zhu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Fabrication of Ni stamp with high aspect ratio, two-leveled, cylindrical microstructures using dry etching and electroplating
Ritika Singh Petersen et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2015)
Reactive ion beam etching of fused silica using vertical lamellar patterns of PS-b-PMMA diblock copolymer masks
Joachim Zajadacz et al.
MICROELECTRONIC ENGINEERING (2015)
Ultra-precision nano-structure fabrication by amplitude control sculpturing method in elliptical vibration cutting
Jianguo Zhang et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)
Periodically patterned Si pyramids for realizing high efficient solar cells by wet etching process
Melvin David Kumar et al.
SOLAR ENERGY (2015)
Periodic surface pattern fabrication via biprism interference micro-machining
Ishan Saxena et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2015)
Ultra-precision machining of Fresnel lens mould by single-point diamond turning based on axis B rotation
C. J. Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Experimental studies of wettability control on cylindrical surfaces by elliptical vibration texturing
Yong Lu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Generation of hierarchical micro-structures for anisotropic wetting by elliptical vibration cutting
Ping Guo et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
A study of the fabrication of v-groove structure in ultra-precision milling
Sujuan Wang et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2014)
Fabrication of deep micro-holes in reaction-bonded SiC by ultrasonic cavitation assisted micro-EDM
Pay Jun Liew et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
Tool path generation for fabricating optical freeform surfaces by non-resonant three-dimensional elliptical vibration cutting
Lin Jieqiong et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2014)
PiCam: An Ultra-Thin High Performance Monolithic Camera Array
Kartik Venkataraman et al.
ACM TRANSACTIONS ON GRAPHICS (2013)
Bio-inspired functional surfaces for advanced applications
Ajay Malshe et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Manufacturing and measurement of freeform optics
F. Z. Fang et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Precision grinding of binderless ultrafine tungsten carbide (WC) microstructured surfaces
Bing Guo et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Design and dynamic optimization of an ultraprecision diamond flycutting machine tool for large KDP crystal machining
Yingchun Liang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
A theoretical and experimental study of surface generation under spindle vibration in ultra-precision raster milling
S. J. Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
An analysis of the surface generation mechanics of the elliptical vibration texturing process
Ping Guo et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Thermo-mechanical characterization of glass at high temperature using the cylinder compression test. Part I: Viscoelasticity, friction, and PPV
Dhananjay Joshi et al.
JOURNAL OF RHEOLOGY (2013)
Direct femtosecond laser surface nano/microstructuring and its applications
Anatoliy Y. Vorobyev et al.
LASER & PHOTONICS REVIEWS (2013)
Fabrication of sub 20-nm wide grooves in a quartz mold by space narrowing dry etching
Kenta Suzuki et al.
MICROELECTRONIC ENGINEERING (2013)
Development of a tertiary motion generator for elliptical vibration texturing
Ping Guo et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2013)
Efficient Machining of Microdimples for Friction Reduction
B. Denkena et al.
JOURNAL OF MICRO AND NANO-MANUFACTURING (2013)
Fabrication of Micro-Dimpled Surfaces through Micro Ball End Milling
Eldon Graham et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)
Creation of periodic subwavelength ripples on tungsten surface by ultra-short laser pulses
Lu Xue et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2012)
Optimized tool path generation for fast tool servo diamond turning of micro-structured surfaces
De Ping Yu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Profile error compensation in fast tool servo diamond turning of micro-structured surfaces
De Ping Yu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Black Silicon formation using dry etching for solar cells applications
D. Murias et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2012)
Fabrication of Micro-Structured Surfaces on Bulk Metallic Glasses Based on Fast Tool Servo Assisted Diamond Turning
Zhiwei Zhu et al.
SCIENCE OF ADVANCED MATERIALS (2012)
Micro dimple milling on cylinder surfaces
Takashi Matsumura et al.
Journal of Manufacturing Processes (2012)
Manufacturing structured surface by combining microindentation and ultraprecision cutting
Jiwang Yan et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2012)
Review on diamond-machining processes for the generation of functional surface structures
Ekkard Brinksmeier et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2012)
Ultrafast Changes in the Optical Properties of a Titanium Surface and Femtosecond Laser Writing of One-Dimensional Quasi-Periodic Nanogratings of Its Relief
E. V. Golosov et al.
JOURNAL OF EXPERIMENTAL AND THEORETICAL PHYSICS (2011)
Ultraprecision machining of micro-structured functional surfaces on brittle materials
D. P. Yu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2011)
Fabrication of circular microfluidic channels by combining mechanical micromilling and soft lithography
Mary E. Wilson et al.
LAB ON A CHIP (2011)
Analysis of regenerative chatter suppression with adding the ultrasonic elliptical vibration on the cutting tool
Chunxiang Ma et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2011)
Micro/nano sculpturing of hardened steel by controlling vibration amplitude in elliptical vibration cutting
Norikazu Suzuki et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2011)
Investigation on shape transferability in ultraprecision glass molding press for microgrooves
Tianfeng Zhou et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2011)
Surface nanostructuring of Ni/Cu foils by femtosecond laser pulses
V. P. Korolkov et al.
QUANTUM ELECTRONICS (2011)
Surface patterning on periodicity of femtosecond laser-induced ripples
Yang Yang et al.
APPLIED PHYSICS LETTERS (2010)
Fabricating micro-structured surface by using single-crystalline diamond endmill
Jiwang Yan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Water sprints uphill on glass
A. Y. Vorobyev et al.
JOURNAL OF APPLIED PHYSICS (2010)
Laser fluence dependence of periodic grating structures formed on metal surfaces under femtosecond laser pulse irradiation
Kiminori Okamuro et al.
PHYSICAL REVIEW B (2010)
Controlled nanostructrures formation by ultra fast laser pulses for color marking
B. Dusser et al.
OPTICS EXPRESS (2010)
Manufacturing of functional riblet structures by profile grinding
Berend Denkena et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2010)
Morphology studies of the metal surfaces with enhanced absorption fabricated using interferometric femtosecond ablation
J. J. J. Kaakkunen et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2009)
Micro grinding tool for manufacture of complex structures in brittle materials
J. C. Aurich et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Optimization of machining parameters using magnetic-force-assisted EDM based on gray relational analysis
Yan-Cherng Lin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Femtosecond laser-induced periodic surface structures revisited: A comparative study on ZnO
D. Dufft et al.
JOURNAL OF APPLIED PHYSICS (2009)
Low-Dimensional Waveguide Grating Fabrication in GaN with Use of SiCl4/Cl2/Ar-Based Inductively Coupled Plasma Dry Etching
R. Dylewicz et al.
JOURNAL OF ELECTRONIC MATERIALS (2009)
Precision machining of microstructures on electroless-plated NiP surface for molding glass components
Jiwang Yan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Studies on the influence of grinding wheel bond material on the grindability of metal matrix composites
B. Anand Ronald et al.
MATERIALS & DESIGN (2009)
Brighter Light Sources from Black Metal: Significant Increase in Emission Efficiency of Incandescent Light Sources
A. Y. Vorobyev et al.
PHYSICAL REVIEW LETTERS (2009)
Advances in engineered surfaces for functional performance
A. A. G. Bruzzone et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Analysis of 3D elliptical vibration cutting with thin shear plane model
E. Shamoto et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Theoretical and experimental analysis of nano-surface generation in ultra-precision raster milling
M. N. Cheng et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Review of vibration-assisted machining
D. E. Brehl et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)
Dissipative nanostructures and Feigenbaum's universality in the Metal-high-power ultrashort-pulsed polarized radiation nonequilibrium nonlinear dynamical system
V. S. Makin et al.
TECHNICAL PHYSICS LETTERS (2008)
Plasmonic laser nanoablation of silicon by the scattering of femtosecond pulses near gold nanospheres
D. Eversole et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2007)
An ultrasonic elliptical vibration cutting device for micro V-groove machining: Kinematical analysis and micro V-groove machining characteristics
Gi Dae Kim et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Femtosecond laser structuring of titanium implants
A. Y. Vorobyev et al.
APPLIED SURFACE SCIENCE (2007)
Wet etching of sputtered tantalum thin films in NaOH and KOH based solutions
S. Sood et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2007)
Periodic ordering of random surface nanostructures induced by femtosecond laser pulses on metals
A. Y. Vorobyev et al.
JOURNAL OF APPLIED PHYSICS (2007)
Elliptical vibration cutting of tungsten alloy molds for optical glass parts
N. Suzuki et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Making silicon hydrophobic: wettability control by two-lengthscale simultaneous patterning with femtosecond laser irradiation
V. Zorba et al.
NANOTECHNOLOGY (2006)
Tool wear and surface finish in diamond cutting of optical glass
M Zhou et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
NURBS based ultra-precision free-form machining
C. Brecher et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)
A study on the influence of process parameters on efficiency and crystallinity of electroless Ni-P deposits
JTW Jappes et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Micro V-groove grinding technique of large germanium immersion grating element for mid-infrared spectrograph
SH Yin et al.
JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING (2004)
GaN nanotip pyramids formed by anisotropic etching
HM Ng et al.
JOURNAL OF APPLIED PHYSICS (2003)
Development of a superabrasive grinding wheel with defined grain structure using kinematic simulation
JC Aurich et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)
Machining characteristics of titanium alloy (Ti-6Al-4V) using a combination process of EDM with USM
YC Lin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
Share Paper
