Related references
Note: Only part of the references are listed.Damage and Damping Identification in a Structure Through Novel Damped Updating Method
Shankar Sehgal et al.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING (2021)
Sputtered crystalline TiO2 film drives improved surface properties of titanium-based biomedical implants
Heloisa Navarro Pantaroto et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)
Influence of Ag doping on the microstructure, mechanical properties, and adhesion stability of diamond-like carbon films
P. P. Jing et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Mechanical and tribological assessment of composite AlCrN or a-C: Ag-based thin films for implant application
Lokeswar Patnaik et al.
CERAMICS INTERNATIONAL (2021)
Effect of tribological process parameters on the wear and frictional behaviour of Cr-(CrN/TiN) composite coating: An experimental and analytical study
Sunil Kumar et al.
CERAMICS INTERNATIONAL (2021)
Modeling of wear parameters and multi-criteria optimization by Box-Behnken design of AlCrN thin film against gamma-irradiated Ti6Al4V counterbody
Lokeswar Patnaik et al.
CERAMICS INTERNATIONAL (2021)
Effect of lubricated sliding wear against CFRPEEK on the nanomechanical properties of Ag alloyed Cr/DLC thin film
Lokeswar Patnaik et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
Tribomechanical properties of hard Cr-doped DLC coatings deposited by low-frequency HiPIMS
J. A. Santiago et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Re-epithelialization and immune cell behaviour in an ex vivo human skin model
Ana Rakita et al.
SCIENTIFIC REPORTS (2020)
Effects of substrate preparation on TiO2 morphology and topography during anodization of biomedical Ti6Al4V
Keng Ho Cheung et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Friction and tribological behavior of bare nitrided, TiAlN and AlCrN coated MDC-K hot work tool steel
Sunil Kumar et al.
CERAMICS INTERNATIONAL (2020)
Effects of Substrate Rotation Speed on Structure and Adhesion Properties of CrN/CrAlSiN Multilayer Coatings Prepared Using High-Power Impulse Magnetron Sputtering
Jian-Fu Tang et al.
COATINGS (2020)
High adhesion diamond films deposited on stainless steel by using nanocomposite films with mosaic interface as an interlayer
Feng Lyu et al.
APPLIED SURFACE SCIENCE (2020)
Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application
Lokeswar Patnaik et al.
CERAMICS INTERNATIONAL (2020)
Thesp3/sp2carbon ratio as a modulator ofin vivoandin vitrotoxicity of the chemically purified detonation-synthesized nanodiamond via the reactive oxygen species generation
Dong-Keun Lee et al.
NANOTOXICOLOGY (2020)
Modeling of Cutting Parameters and Tool Geometry for Multi-Criteria Optimization of Surface Roughness and Vibration via Response Surface Methodology in Turning of AISI 5140 Steel
Mustafa Kuntoglu et al.
MATERIALS (2020)
Mechanical Properties and Biocompatibility of Ti-doped Diamond-like Carbon Films
Mengqi Zhang et al.
ACS OMEGA (2020)
Status of nickel free stainless steel in biomedical field: A review of last 10 years and what else can be done
Lokeswar Patnaik et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Vanadium ionic species from degradation of Ti-6Al-4V metallic implants: In vitro cytotoxicity and speciation evaluation
Bruna C. Costa et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Designing Nanostructured Ti6Al4V Bioactive Interfaces with Directed Irradiation Synthesis toward Cell Stimulation to Promote Host-Tissue-Implant Integration
Ana Civantos et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Efficient Inhibition of Wear-Debris-Induced Osteolysis by Surface Biomimetic Engineering of Titanium Implant with a Mussel-Derived Integrin-Targeting Peptide
Xiaobin Guo et al.
ADVANCED BIOSYSTEMS (2019)
Correlation between structural and mechanical properties of silicon doped DLC thin films
Ranjan Kr. Ghadai et al.
DIAMOND AND RELATED MATERIALS (2018)
Characteristics of surface modified Ti-6A1-4V alloy by a series of YAG laser irradiation
Xian Zeng et al.
OPTICS AND LASER TECHNOLOGY (2018)
Photocatalytic degradation of acesulfame K: Optimization using the Box-Behnken design (BBD)
Seong-Nam Nam et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)
Preliminary study on the corrosion resistance, antibacterial activity and cytotoxicity of selective-laser-melted Ti6Al4V-xCu alloys
Sai Guo et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Microstructure and nanomechanical properties of pulsed excimer laser deposited DLC:Ag films: Enhanced nanotribological response
M. Constantinou et al.
SURFACE & COATINGS TECHNOLOGY (2017)
NOVEL DYNAMIC MODEL UPDATING TECHNIQUE FOR DAMPED MECHANICAL SYSTEM
Shankar Sehgal et al.
JOURNAL OF THEORETICAL AND APPLIED MECHANICS-BULGARIA (2017)
Wear behavior of γ-irradiated Ti6Al4V alloy sliding on TiN deposited steel surface
I. Saravanan et al.
TRIBOLOGY INTERNATIONAL (2016)
Optimization of wear parameters and their relative effects on TiN coated surface against Ti6Al4V alloy
I. Saravanan et al.
MATERIALS & DESIGN (2016)
Optimizing wear behavior of TiN coated SS 316L against Ti alloy using Response Surface Methodology
I. Saravanan et al.
MATERIALS & DESIGN (2015)
Silver surface segregation in Ag-DLC nanocomposite coatings
Noora Kristiina Manninen et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Influence of Ag content on mechanical and tribological behavior of DLC coatings
N. K. Manninen et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Comparison of trabecular metal cups and titanium fiber-mesh cups in primary hip arthroplasty A randomized RSA and bone mineral densitometry study of 50 hips
Thomas Baad-Hansen et al.
ACTA ORTHOPAEDICA (2011)
Sliding tribological behaviors of PVD CrN and AlCrN coatings against Si3N4 ceramic and pure titanium
J. L. Mo et al.
WEAR (2009)
Comparative surface and nano-tribological characteristics of nanocomposite diamond-like carbon thin films doped by silver
H. -S. Zhang et al.
APPLIED SURFACE SCIENCE (2008)
Share Paper
