Related references
Note: Only part of the references are listed.Heterostructured materials: superior properties from hetero-zone interaction
Yuntian Zhu et al.
MATERIALS RESEARCH LETTERS (2021)
Characterization of the fatigue behavior of additive friction stir-deposition AA2219
K. Anderson-Wedge et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Additive friction stir deposition: a deformation processing route to metal additive manufacturing
Hang Z. Yu et al.
MATERIALS RESEARCH LETTERS (2021)
Solid-state cladding on thin automotive sheet metals enabled by additive friction stir deposition
W. Douglas Hartley et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Process-structure-property relations for as-deposited solid-state additively manufactured high-strength aluminum alloy
C. J. T. Mason et al.
ADDITIVE MANUFACTURING (2021)
Solid-state additive manufacturing of aluminum and copper using additive friction stir deposition: Process-microstructure linkages
R. Joey Griffiths et al.
MATERIALIA (2021)
A comprehensive review of ultrasonic additive manufacturing
Adam Hehr et al.
RAPID PROTOTYPING JOURNAL (2020)
Influence of Grain Refinement and Microstructure on Fatigue Behavior for Solid-State Additively Manufactured Al-Zn-Mg-Cu Alloy
D. Z. Avery et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Effect of Thermomechanical Processing on Fatigue Behavior in Solid-State Additive Manufacturing of Al-Mg-Si Alloy
Ben A. Rutherford et al.
METALS (2020)
Solid-State Metal Additive Manufacturing: A Review
Nihan Tuncer et al.
JOM (2020)
Laser powder bed fusion for metal additive manufacturing: perspectives on recent developments
S. L. Sing et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Microstructure Development in Additive Friction Stir-Deposited Cu
Jonathan L. Priedeman et al.
METALS (2020)
A Perspective on Solid-State Additive Manufacturing of Aluminum Matrix Composites Using MELD
R. Joey Griffiths et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
Ross Cunningham et al.
SCIENCE (2019)
Design of Architectured Materials Based on Mechanically Driven Structural and Compositional Patterning
Yuri Estrin et al.
ADVANCED ENGINEERING MATERIALS (2019)
Additive Friction Stir-Enabled Solid-State Additive Manufacturing for the Repair of 7075 Aluminum Alloy
R. Joey Griffiths et al.
APPLIED SCIENCES-BASEL (2019)
Influence of plastic deformation and Cu/Mg ratio on the strengthening mechanisms and precipitation behavior of AA2024 aluminum alloys
J. L. Garcia-Hernandez et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
A Review on Recent Progress in Solid State Friction Based Metal Additive Manufacturing: Friction Stir Additive Techniques
Manu Srivastava et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2019)
Experimental evaluation of strain and strain rate during rapid cooling friction stir welding of pure copper
X. C. Liu et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
Microstructure-deformation relationship of additive friction stir-deposition Al-Mg-Si
B. J. Phillips et al.
MATERIALIA (2019)
Influence of tool geometry on material flow and mechanical properties of friction stir welded Al-Cu bimetals
R. Beygi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
A review of friction stir welding of steels: Tool, material flow, microstructure, and properties
F. C. Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review
G. K. Padhy et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Evaluation of microstructure stability at the interfaces of Al-6061 welds fabricated using ultrasonic additive manufacturing
Niyanth Sridharan et al.
MATERIALS CHARACTERIZATION (2018)
Influence of texture and grain refinement on the mechanical behavior of AA2219 fabricated by high shear solid state material deposition
O. G. Rivera et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Review on thermal analysis in laser-based additive manufacturing
Zhaorui Yan et al.
OPTICS AND LASER TECHNOLOGY (2018)
Non-beam-based metal additive manufacturing enabled by additive friction stir deposition
Hang Z. Yu et al.
SCRIPTA MATERIALIA (2018)
Fatigue Behavior of Solid-State Additive Manufactured Inconel 625
D. Z. Avery et al.
JOM (2018)
Microstructures and mechanical behavior of Inconel 625 fabricated by solid-state additive manufacturing
O. G. Rivera et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Development of Sustainable Cold Spray Coatings and 3D Additive Manufacturing Components for Repair/Manufacturing Applications: A Critical Review
Sunil Pathak et al.
COATINGS (2017)
Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
Cang Zhao et al.
SCIENTIFIC REPORTS (2017)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing
Amrita Basak et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
A review of dynamic recrystallization phenomena in metallic materials
K. Huang et al.
MATERIALS & DESIGN (2016)
Additive manufacturing of materials: Opportunities and challenges
S. S. Babu et al.
MRS BULLETIN (2015)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
The equivalent strain in high pressure torsion
John J. Jonas et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Taku Sakai et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Microstructural Evolution During Friction Surfacing of Dissimilar Aluminum Alloys
U. Suhuddin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Three-dimensional visualization of material flow during friction stir welding by two pairs of X-ray transmission systems
Y. Morisada et al.
SCRIPTA MATERIALIA (2011)
Flow visualization and estimation of strain and strain-rate during friction stir process
S. Mukherjee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Material flow during friction stir spot welding
Q. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Using high-pressure torsion for metal processing: Fundamentals and applications
Alexander P. Zhilyaev et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Effect of welding parameters on the strain rate and microstructure of friction stir spot welded 2024 aluminum alloy
Adrian Gerlich et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Material flow in butt friction stir welds in AA2024-T3
HNB Schmidt et al.
ACTA MATERIALIA (2006)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Grain refinement in coarse-grained 7475 Al alloy during severe hot forging
O Sitdikov et al.
PHILOSOPHICAL MAGAZINE (2005)
Analytical modeling of material flow in equal channel angular extrusion (ECAE)
IJ Beyerlein et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Production of ultra-fine grain microstructures in Al-Mg alloys by coventional rolling
A Gholinia et al.
ACTA MATERIALIA (2002)
Flow patterns during friction stir welding
A Guerra et al.
MATERIALS CHARACTERIZATION (2002)
Visualization of the material flow in AA2195 friction-stir welds using a marker insert technique
TU Seidel et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Share Paper
