Related references
Note: Only part of the references are listed.Effect of Volatile Organic Compounds Adsorption on 3D-Printed PEGDA:PEDOT for Long-Term Monitoring Devices
Giorgio Scordo et al.
NANOMATERIALS (2021)
Electrically Conductive and 3D-Printable Oxidized Alginate-Gelatin Polypyrrole:PSS Hydrogels for Tissue Engineering
Thomas Distler et al.
ADVANCED HEALTHCARE MATERIALS (2021)
3D Printable Electrically Conductive Hydrogel Scaffolds for Biomedical Applications: A Review
Sandya Shiranthi Athukorala et al.
POLYMERS (2021)
3D printing PEDOT-CMC-based high areal capacity electrodes for Li-ion batteries
Pengqiang Bao et al.
IONICS (2021)
3D Printable Conducting and Biocompatible PEDOT-graft-PLA Copolymers by Direct Ink Writing
Antonio Dominguez-Alfaro et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2021)
Orthogonal photochemistry-assisted printing of 3D tough and stretchable conductive hydrogels
Hongqiu Wei et al.
NATURE COMMUNICATIONS (2021)
Electrohydrodynamic jet printed conducting polymer for enhanced chemiresistive gas sensors†
Nhlakanipho Mkhize et al.
JOURNAL OF MATERIALS CHEMISTRY C (2021)
Inkjet printing of silver nanowires on flexible surfaces and methodologies to improve the conductivity and stability of the printed patterns
Prathamesh Patil et al.
NANOSCALE ADVANCES (2021)
3D printing of electrically conductive hydrogels for tissue engineering and biosensors - A review
Thomas Distler et al.
ACTA BIOMATERIALIA (2020)
All-Polymer Conducting Fibers and 3D Prints via Melt Processing and Templated Polymerization
Anna I. Hofmann et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Ambient-Dried, 3D-Printable and Electrically Conducting Cellulose Nanofiber Aerogels by Inclusion of Functional Polymers
Hugo Francon et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Progress in understanding structure and transport properties of PEDOT-based materials: A critical review
Magatte N. Gueye et al.
PROGRESS IN MATERIALS SCIENCE (2020)
Ultrafast 3D printing with submicrometer features using electrostatic jet deflection
Ievgenii Liashenko et al.
NATURE COMMUNICATIONS (2020)
3D Printing of Polycaprolactone-Polyaniline Electroactive Scaffolds for Bone Tissue Engineering
Arie Wibowo et al.
MATERIALS (2020)
Electrochemically driven multi-material 3D-printing
Adriano Ambrosi et al.
APPLIED MATERIALS TODAY (2020)
Work Function Engineering of Electrohydrodynamic-Jet-Printed PEDOT:PSS Electrodes for High-Performance Printed Electronics
Benzheng Lyu et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Bioprinting: From Tissue and Organ Development to in Vitro Models
Carlos Mota et al.
CHEMICAL REVIEWS (2020)
Polymeric Systems for Bioprinting
Matthew L. Bedell et al.
CHEMICAL REVIEWS (2020)
Comparative Studies on Polyurethane Composites Filled with Polyaniline and Graphene for DLP-Type 3D Printing
Hyeonseo Joo et al.
POLYMERS (2020)
Tailored Methodology Based on Vapor Phase Polymerization to Manufacture PEDOT/CNT Scaffolds for Tissue Engineering
Antonio Dominguez-Alfaro et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)
3D printing of conducting polymers
Hyunwoo Yuk et al.
NATURE COMMUNICATIONS (2020)
A supertough electro-tendon based on spider silk composites
Liang Pan et al.
NATURE COMMUNICATIONS (2020)
Tailoring PEDOT properties for applications in bioelectronics
Mary J. Donahue et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2020)
Multifunctional 3D-Printed Patches for Long-Term Drug Release Therapies after Myocardial Infarction
Rubina Ajdary et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Printed Temperature Sensor Based on PEDOT: PSS-Graphene Oxide Composite
Mahesh Soni et al.
IEEE SENSORS JOURNAL (2020)
Role of the Processing Solvent on the Electrical Conductivity of PEDOT:PSS
Jingjin Dong et al.
ADVANCED MATERIALS INTERFACES (2020)
An Electroactive Oligo-EDOT Platform for Neural Tissue Engineering
Kaja Ritzau-Reid et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
3D Printing and Bioprinting Nerve Conduits for Neural Tissue Engineering
Xiaoling Yu et al.
POLYMERS (2020)
Rapid High-Resolution Visible Light 3D Printing
Dowon Ahn et al.
ACS CENTRAL SCIENCE (2020)
Inflight fiber printing toward array and 3D optoelectronic and sensing architectures
Wenyu Wang et al.
SCIENCE ADVANCES (2020)
Bioactive polymeric materials and electrical stimulation strategies for musculoskeletal tissue repair and regeneration
Bryan Ferrigno et al.
BIOACTIVE MATERIALS (2020)
Recent progress on PEDOT:PSS based polymer blends and composites for flexible electronics and thermoelectric devices
Yan Yang et al.
MATERIALS CHEMISTRY FRONTIERS (2020)
Direct ink writing advances in multi-material structures for a sustainable future
Victoria G. Rocha et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Morphology and properties of PEDOT:PSS/soft polymer blends through hydrogen bonding interaction and their pressure sensor application
Yin-Tse Tseng et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
Three dimensional printed degradable and conductive polymer scaffolds promote chondrogenic differentiation of chondroprogenitor cells
Aruna Prasopthum et al.
BIOMATERIALS SCIENCE (2020)
Synthesis and 3D Printing of Conducting Alginate-Polypyrrole Ionomers
Cassandra J. Wright et al.
GELS (2020)
3D printing of cell-laden electroconductive bioinks for tissue engineering applications
Hadi Rastin et al.
JOURNAL OF MATERIALS CHEMISTRY B (2020)
Printable carbon nanotube-based elastic conductors for fully-printed sub-1 V stretchable electrolyte-gated transistors and inverters
Kyung Gook Cho et al.
JOURNAL OF MATERIALS CHEMISTRY C (2020)
Three-dimensional printing of black phosphorous/polypyrrole electrode for energy storage using thermoresponsive ink
Ruizhe Xing et al.
CHEMICAL COMMUNICATIONS (2020)
Pure PEDOT:PSS hydrogels
Baoyang Lu et al.
NATURE COMMUNICATIONS (2019)
Highly Conductive, Stretchable, and Cell-Adhesive Hydrogel by Nanoclay Doping
Christoph Tondera et al.
SMALL (2019)
Laser-Induced Graphene Composites for Printed, Stretchable, and Wearable Electronics
Farshad Tehrani et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Development of 3D printable conductive hydrogel with crystallized PEDOT:PSS for neural tissue engineering
Dong Nyoung Heo et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)
Inkjet-printed stretchable and low voltage synaptic transistor array
F. Molina-Lopez et al.
NATURE COMMUNICATIONS (2019)
Quantifying the factors limiting rate performance in battery electrodes
Ruiyuan Tian et al.
NATURE COMMUNICATIONS (2019)
Human Neural Tissues from Neural Stem Cells Using Conductive Biogel and Printed Polymer Microelectrode Arrays for 3D Electrical Stimulation
Eva Tomaskovic-Crook et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Flexible and Stretchable Electronic Skin with High Durability and Shock Resistance via Embedded 3D Printing Technology for Human Activity Monitoring and Personal Healthcare
Peiqi Wei et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Bioprinting of a Cell-Laden Conductive Hydrogel Composite
Andrew R. Spencer et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Direct Patterning of Highly Conductive PEDOT:PSS/Ionic Liquid Hydrogel via Microreactive Inkjet Printing
Mei Ying Teo et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Electronic Skin: Recent Progress and Future Prospects for Skin-Attachable Devices for Health Monitoring, Robotics, and Prosthetics
Jun Chang Yang et al.
ADVANCED MATERIALS (2019)
3D printing of free-standing and flexible nitrogen doped graphene/polyaniline electrode for electrochemical energy storage
Fuguo Zhou et al.
CHEMICAL PHYSICS LETTERS (2019)
3D All Printing of Polypyrrole Nanotubes for High Mass Loading Flexible Supercapacitor
Yifan Gu et al.
CHEMISTRYSELECT (2019)
Self-Healing and Stretchable 3D-Printed Organic Thermoelectrics
Seyoung Kee et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
3D Printing of Conductive Tissue Engineering Scaffolds Containing Polypyrrole Nanoparticles with Different Morphologies and Concentrations
Chunyang Ma et al.
MATERIALS (2019)
3D-Printed PCL/PPy Conductive Scaffolds as Three-Dimensional Porous Nerve Guide Conduits (NGCs) for Peripheral Nerve Injury Repair
Sanjairaj Vijayavenkataraman et al.
FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2019)
Ultrathin Fully Printed Light-Emitting Electrochemical Cells with Arbitrary Designs on Biocompatible Substrates
Johannes Zimmermann et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Advanced electronic skin devices for healthcare applications
Zhong Ma et al.
JOURNAL OF MATERIALS CHEMISTRY B (2019)
Nanostructured electrically conductive hydrogels obtained via ultrafast laser processing and self-assembly
Yufeng Tao et al.
NANOSCALE (2019)
Electrohydrodynamic 3D printing of layer-specifically oriented, multiscale conductive scaffolds for cardiac tissue engineering
Qi Lei et al.
NANOSCALE (2019)
Assembling polymeric silver nanowires for transparent conductive cellulose nanopaper
Yongxiang Su et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Recent Progress of Direct Ink Writing of Electronic Components for Advanced Wearable Devices
Yubai Zhang et al.
ACS APPLIED ELECTRONIC MATERIALS (2019)
Direct Writing and Characterization of Three-Dimensional Conducting Polymer PEDOT Arrays
Peikai Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Electrohydrodynamic Printing of Microscale PEDOT:PSS-PEO Features with Tunable Conductive/Thermal Properties
Jinke Chang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Three-Dimensional Printing of Polyaniline/Reduced Graphene Oxide Composite for High-Performance Planar Supercapacitor
Zishen Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Development of Graphene Oxide/Polyaniline Inks for High Performance Flexible Microsupercapacitors via Extrusion Printing
Yuqing Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Electrical Stimulation with a Conductive Polymer Promotes Neurite Outgrowth and Synaptogenesis in Primary Cortical Neurons in 3D
Qingsheng Zhang et al.
SCIENTIFIC REPORTS (2018)
DVS-Crosslinked PEDOT:PSS Free-Standing and Textile Electrodes toward Wearable Health Monitoring
Isabel del Agua et al.
ADVANCED MATERIALS TECHNOLOGIES (2018)
3D-Printed, Superelastic Polypyrrole-Graphene Electrodes with Ultrahigh Areal Capacitance for Electrochemical Energy Storage
Zhen Qi et al.
ADVANCED MATERIALS TECHNOLOGIES (2018)
3D Printed Polymer Photodetectors
Sung Hyun Park et al.
ADVANCED MATERIALS (2018)
Fabrication of Conducting Polyacrylate Resin Solution with Polyaniline Nanofiber and Graphene for Conductive 3D Printing Application
Hoseong Han et al.
POLYMERS (2018)
Enhanced thermoelectric properties of flexible aerosol-jet printed carbon nanotube-based nanocomposites
Canlin Ou et al.
APL MATERIALS (2018)
Three-Dimensional Conductive Scaffolds as Neural Prostheses Based on Carbon Nanotubes and Polypyrrole
Nuria Alegret et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
A Self-Healable, Highly Stretchable, and Solution Processable Conductive Polymer Composite for Ultrasensitive Strain and Pressure Sensing
Tao Wang et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Multi-material 3D printing: The relevance of materials affinity on the boundary interface performance
L. R. Lopes et al.
ADDITIVE MANUFACTURING (2018)
Electrohydrodynamic Printing for Advanced Micro/Nanomanufacturing: Current Progresses, Opportunities, and Challenges
Yiwei Han et al.
JOURNAL OF MICRO AND NANO-MANUFACTURING (2018)
Fully Printed Light-Emitting Electrochemical Cells Utilizing Biocompatible Materials
Johannes Zimmermann et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Conducting Polymer Scaffolds Based on Poly(3,4-ethylenedioxythiophene) and Xanthan Gum for Live-Cell Monitoring
Isabel del Agua et al.
ACS OMEGA (2018)
Advances in 3D Bioprinting for Neural Tissue Engineering
Se-Jun Lee et al.
ADVANCED BIOSYSTEMS (2018)
Structural, optical and electrical properties of polypyrrole in an ionic liquid
Osman Gurbuz et al.
POLYMER BULLETIN (2017)
Advanced Materials for Printed Wearable Electrochemical Devices: A Review
Jayoung Kim et al.
ADVANCED ELECTRONIC MATERIALS (2017)
Bio-inks for 3D bioprinting: recent advances and future prospects
Ilze Donderwinkel et al.
POLYMER CHEMISTRY (2017)
Effective treatment methods on PEDOT:PSS to enhance its thermoelectric performance
Zhengyou Zhu et al.
SYNTHETIC METALS (2017)
In situ electrical and thermal monitoring of printed electronics by two-photon mapping
Francesco Pastorelli et al.
SCIENTIFIC REPORTS (2017)
Conducting Polymer longels Based on PEDOT and Guar Gum
Isabel del Agua et al.
ACS MACRO LETTERS (2017)
Poly(3,4-ethylenedioxythiophene) (PEDOT) Derivatives: Innovative Conductive Polymers for Bioelectronics
Daniele Mantione et al.
POLYMERS (2017)
A highly stretchable, transparent, and conductive polymer
Yue Wang et al.
SCIENCE ADVANCES (2017)
3D Printed Masks and Transfer Stamping Process to Enable the Fabrication of the Hemispherical Organic Photodiodes
Hyunsoo Kim et al.
ADVANCED MATERIALS TECHNOLOGIES (2017)
Fully Printed Electrodes on Stretchable Textiles for Long-Term Electrophysiology
Eloise Bihar et al.
ADVANCED MATERIALS TECHNOLOGIES (2017)
A robust, highly stretchable supramolecular polymer conductive hydrogel with self-healability and thermo-processability
Qian Wu et al.
SCIENTIFIC REPORTS (2017)
Skin-Inspired Multifunctional Autonomic-Intrinsic Conductive Self-Healing Hydrogels with Pressure Sensitivity, Stretchability, and 3D Printability
Mohammad Ali Darabi et al.
ADVANCED MATERIALS (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Screen-Printed Fabrication of PEDOT: PSS/Silver Nanowire Composite Films for Transparent Heaters
Xin He et al.
MATERIALS (2017)
Low-Temperature Cross-Linking of PEDOT:PSS Films Using Divinylsulfone
Daniele Mantione et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink
Jung Hyun Kim et al.
ACS NANO (2016)
Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review
Morteza Amjadi et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Ultraflexible In-Plane Micro-Supercapacitors by Direct Printing of Solution-Processable Electrochemically Exfoliated Graphene
Zhaoyang Liu et al.
ADVANCED MATERIALS (2016)
3D-printing technologies for electrochemical applications
Adriano Ambrosi et al.
CHEMICAL SOCIETY REVIEWS (2016)
Poly(3,4-ethylenedioxythiophene):GlycosAminoGlycan Aqueous Dispersions: Toward Electrically Conductive Bioactive Materials for Neural Interfaces
Daniele Mantione et al.
MACROMOLECULAR BIOSCIENCE (2016)
Inkjet printed silver nanowire percolation networks as electrodes for highly efficient semitransparent organic solar cells
Philipp Maisch et al.
ORGANIC ELECTRONICS (2016)
Layer-by-layer inkjet printing SPS: PEDOT NP/RGO composite film for flexible humidity sensors
Yan Yuan et al.
RSC ADVANCES (2016)
Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate
Tiina Vuorinen et al.
SCIENTIFIC REPORTS (2016)
The construction of three-dimensional composite fibrous macrostructures with nanotextures for biomedical applications
Juqing Song et al.
BIOFABRICATION (2016)
Polyaniline (PANi) based electrode materials for energy storage and conversion
Huanhuan Wang et al.
JOURNAL OF SCIENCE-ADVANCED MATERIALS AND DEVICES (2016)
Silver Nanowire-Conducting Polymer-ITO Hybrids for Flexible and Transparent Conductive Electrodes with Excellent Durability
Ji Hoon Yoo et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Simultaneously Improving Electrical Conductivity and Thermopower of Polyaniline Composites by Utilizing Carbon Nanotubes as High Mobility Conduits
Hong Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Enhanced Thermoelectric Performance of Bar-Coated SWCNT/P3HT Thin Films
Woohwa Lee et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Roll-to-Roll Printed Silver Nanowire Semitransparent Electrodes for Fully Ambient Solution-Processed Tandem Polymer Solar Cells
Dechan Angmo et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Three-dimensional micro/nanoscale architectures: fabrication and applications
Quan Xu et al.
NANOSCALE (2015)
Spray-printed CNT/P3HT organic thermoelectric films and power generators
Cheon Taek Hong et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Wearable, Human-Interactive, Health-Monitoring, Wireless Devices Fabricated by Macroscale Printing Techniques
Wataru Honda et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Performance of a Printed Photodetector on a Paper Substrate
Roberto S. Aga et al.
IEEE PHOTONICS TECHNOLOGY LETTERS (2014)
Inkjet printed PEDOT:PSS/MWCNT nano-composites with aligned carbon nanotubes and enhanced conductivity
A. S. Alshammari et al.
PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2014)
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Jos Malda et al.
ADVANCED MATERIALS (2013)
Thermoelectric behavior of organic thin film nanocomposites
Gregory P. Moriarty et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2013)
Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules
Dechan Angmo et al.
ORGANIC ELECTRONICS (2013)
Conducting Polymers Directly Coated on Reduced Graphene Oxide Sheets as High-Performance Supercapacitor Electrodes
Jintao Zhang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
Hierarchical nanostructured conducting polymer hydrogel with high electrochemical activity
Lijia Pan et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2012)
Inkjet printed polypyrrole/collagen scaffold: A combination of spatial control and electrical stimulation of PC12 cells
Bo Weng et al.
SYNTHETIC METALS (2012)
Gemini surfactant doped polypyrrole nanodispersions: an inkjet printable formulation
Bo Weng et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Fabrication and Characterization of Cytocompatible Polypyrrole Films Inkjet Printed from Nanoformulations Cytocompatible, Inkjet-Printed Polypyrrole Films
Bo Weng et al.
SMALL (2011)
Carbon nanotube based composites for electronic applications: CNT-conducting polymers, CNT-Cu
N. Ferrer-Anglada et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2006)
Share Paper
