Related references
Note: Only part of the references are listed.A Review on Multifunctional Epoxy-Based Joncryl® ADR Chain Extended Thermoplastics
Tobias Standau et al.
POLYMER REVIEWS (2022)
Strategic decisions leading to sustainable waste management: Separation, sorting and recycling possibilities
Jaroslav Pluskal et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Mechanical Recycling of Packaging Plastics: A Review
Zoe O. G. Schyns et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2021)
The role of polymer mechanochemistry in responsive materials and additive manufacturing
Maroun Abi Ghanem et al.
NATURE REVIEWS MATERIALS (2021)
Waste high-density polyethylene recycling process systems for mitigating plastic pollution through a sustainable design and synthesis paradigm
Xiang Zhao et al.
AICHE JOURNAL (2021)
Single-use plastics: Production, usage, disposal, and adverse impacts
Yuan Chen et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2021)
An analysis of the plastic waste trade and management in Asia
Yangyang Liang et al.
WASTE MANAGEMENT (2021)
A recycler's perspective on the implications of REACH and food contact material (FCM) regulations for the mechanical recycling of FCM plastics
Ellen De Tandt et al.
WASTE MANAGEMENT (2021)
Closed-loop recycling of polyethylene-like materials
Manuel Haeussler et al.
NATURE (2021)
Recycling of post-consumer multilayer Tetra Pak® packaging with the Selective Dissolution-Precipitation process
Ioulia Georgiopoulou et al.
RESOURCES CONSERVATION AND RECYCLING (2021)
Current Technologies in Depolymerization Process and the Road Ahead
Yu Miao et al.
POLYMERS (2021)
The Chemical Recycling of Polyesters for a Circular Plastics Economy: Challenges and Emerging Opportunities
Jack Payne et al.
CHEMSUSCHEM (2021)
Waste to Wealth: Chemical Recycling and Chemical Upcycling of Waste Plastics for a Great Future
Huan Chen et al.
CHEMSUSCHEM (2021)
Developments in the life cycle assessment of chemical recycling of plastic waste e A review
Matthew G. Davidson et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Leveling the cost and carbon footprint of circular polymers that are chemically recycled to monomer
Nemi Vora et al.
SCIENCE ADVANCES (2021)
Plastic waste to fuels by hydrocracking at mild conditions
Sibao Liu et al.
SCIENCE ADVANCES (2021)
Achieving a circular bioeconomy for plastics Designing plastics for assembly and disassembly is essential to closing the resource loop
Sarah Kakadellis et al.
SCIENCE (2021)
The myth of historical bio-based plastics Early bio-based plastics, which were neither clean nor green, offer lessons for today
Rebecca Altman
SCIENCE (2021)
A binding global agreement to address the life cycle of plastics To eliminate plastic pollution, a holistic approach is needed
Nils Simon et al.
SCIENCE (2021)
Plastics in the Earth system
Aron Stubbins et al.
SCIENCE (2021)
The global threat from plastic pollution
Matthew MacLeo et al.
SCIENCE (2021)
Toward polymer upcycling-adding value and tackling circularity
LaShanda T. J. Korley et al.
SCIENCE (2021)
Catalytic methods for chemical recycling or upcycling of commercial polymers
Sophia C. Kosloski-Oh et al.
MATERIALS HORIZONS (2021)
Multiblock Copolymers for Recycling Polyethylene-Poly(ethylene terephthalate) Mixed Waste
Keiichiro Nomura et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Non-intentionally added substances (NIAS) in recycled plastics
O. Horodytska et al.
CHEMOSPHERE (2020)
Delineating and preventing plastic waste leakage in the marine and terrestrial environment
John N. Hahladakis
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2020)
Compounding and characterization of recycled multilayer plastic films
Ilari Jonkkari et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Processability predictions for mechanically recycled blends of linear polymers
Janne van Gisbergen et al.
JOURNAL OF POLYMER ENGINEERING (2020)
Structure of the global plastic waste trade network and the impact of China's import Ban
Chao Wang et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Modelling the global impact of China's ban on plastic waste imports
Qiao Huang et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Challenges and opportunities of solvent-based additive extraction methods for plastic recycling
Sibel Ugduler et al.
WASTE MANAGEMENT (2020)
Beyond Mechanical Recycling: Giving New Life to Plastic Waste
Ina Vollmer et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)
Closed-Loop Recycling of Polymers Using Solvents Remaking plastics for a circular economy
James Sherwood
JOHNSON MATTHEY TECHNOLOGY REVIEW (2020)
Introducing four different branch structures in PET by reactive processing--A rheological investigation
Hossein Arayesh et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Recycling of multilayer packaging using a reversible cross-linking adhesive
Katharina M. A. Kaiser
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Regional development of Circular Economy in the European Union: A multidimensional analysis
Francesco Silvestri et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Upcycling of printed plastic films: LCA analysis and effects on the circular economy
Oksana Horodytska et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Building a circular plastics economy with informal waste pickers: Recyclate quality, business model, and societal impacts
Markus Gall et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Sustainability Assessment of a Single-Use Plastics Ban
Timo Herberz et al.
SUSTAINABILITY (2020)
Chemical recycling to monomer for an ideal, circular polymer economy
Geoffrey W. Coates et al.
NATURE REVIEWS MATERIALS (2020)
An engineered PET depolymerase to break down and recycle plastic bottles
V. Tournier et al.
NATURE (2020)
Quantification of indirect waste generation and treatment arising from Australian household consumption: A waste input-output analysis
He He et al.
JOURNAL OF CLEANER PRODUCTION (2020)
The Use of Heterogeneous Catalysis in the Chemical Valorization of Plastic Waste
Lesli O. Mark et al.
CHEMSUSCHEM (2020)
Effect of recycled content and rPET quality on the properties of PET bottles, part III: Modelling of repetitive recycling
Marieke T. Brouwer et al.
PACKAGING TECHNOLOGY AND SCIENCE (2020)
Plastics as a materials system in a circular economy
David G. Bucknall
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2020)
Screening of common synthetic polymers for depolymerization by subcritical hydrothermal liquefaction
Juliano Souza dos Passos et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)
Detailed Analysis of the Composition of Selected Plastic Packaging Waste Products and Its Implications for Mechanical and Thermochemical Recycling
Martijn Roosen et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)
Recycling and management practices of plastic packaging waste towards a circular economy in South Korea
Yong-Chul Jang et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Legacy additives in a circular economy of plastics: Current dilemma, policy analysis, and emerging countermeasures
Swetlana Wagner et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Predicted growth in plastic waste exceeds efforts to mitigate plastic pollution
Stephanie B. Borrelle et al.
SCIENCE (2020)
Polyethylene upcycling to long-chain alkylaromatics by tandem hydrogenolysis/aromatization
Fan Zhang et al.
SCIENCE (2020)
Enhanced polymer mechanical degradation through mechanochemically unveiled lactonization
Yangju Lin et al.
NATURE COMMUNICATIONS (2020)
100th Anniversary of Macromolecular Science Viewpoint: Toward Catalytic Chemical Recycling of Waste (and Future) Plastics
Joshua C. Worch et al.
ACS MACRO LETTERS (2020)
Waste Polypropylene Plastic Recycling toward Climate Change Mitigation and Circular Economy: Energy, Environmental, and Technoeconomic Perspectives
Raaj R. Bora et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
High-performance pan-tactic polythioesters with intrinsic crystallinity and chemical recyclability
Changxia Shi et al.
SCIENCE ADVANCES (2020)
Physical properties and safety of 100% post-consumer PET bottle-organoclay nanocomposites towards a circular economy
Eliezer Velasquez et al.
SUSTAINABLE CHEMISTRY AND PHARMACY (2020)
Catalytic upcycling of high-density polyethylene via a processive mechanism
Akalanka Tennakoon et al.
NATURE CATALYSIS (2020)
Incorporation of recycled high-density polyethylene to polyethylene pipe grade resins to increase close-loop recycling and Underpin the circular economy
Rafael Juan et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Danish Plastic Mass Flows Analysis
Edward Vingwe et al.
SUSTAINABILITY (2020)
Re-Processing of Multilayer Plastic Materials as a Part of the Recycling Process: The Features of Processed Multilayer Materials
Ville Lahtela et al.
POLYMERS (2020)
Recycling of multilayer plastic packaging materials by solvent-targeted recovery and precipitation
Theodore W. Walker et al.
SCIENCE ADVANCES (2020)
Predicting intention to recycle on the basis of the theory of planned behaviour
Denni Arli et al.
INTERNATIONAL JOURNAL OF NONPROFIT AND VOLUNTARY SECTOR MARKETING (2020)
Towards closed-loop recycling of multilayer and coloured PET plastic waste by alkaline hydrolysis
Sibel Ugduler et al.
GREEN CHEMISTRY (2020)
Advances and approaches for chemical recycling of plastic waste
Timmy Thiounn et al.
JOURNAL OF POLYMER SCIENCE (2020)
Dual-catalytic depolymerization of polyethylene terephthalate (PET)
Kayla R. R. Delle Chiaie et al.
POLYMER CHEMISTRY (2020)
Latest Trends and Challenges in Feedstock Recycling of Polyolefinic Plastics
Shogo Kumagai et al.
JOURNAL OF THE JAPAN PETROLEUM INSTITUTE (2020)
Current approaches to waste polymer utilization and minimization: a review
Meltem Okan et al.
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2019)
Life Cycle Assessment of the existing and proposed plastic waste management options in India: A case study
Yash Aryan et al.
JOURNAL OF CLEANER PRODUCTION (2019)
'Seeing' Strain in Soft Materials
Zhiyong Xia et al.
MOLECULES (2019)
Closed-loop recycling of plastics enabled by dynamic covalent diketoenamine bonds
Peter R. Christensen et al.
NATURE CHEMISTRY (2019)
One-Pot Depolymerization and Polycondensation of PET Based Random Oligo- and Polyesters
Levente Karpati et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2019)
The rise in ocean plastics evidenced from a 60-year time series
Clare Ostle et al.
NATURE COMMUNICATIONS (2019)
Solutions and Integrated Strategies for the Control and Mitigation of Plastic and Microplastic Pollution
Joana C. Prata et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2019)
The Influence of Mechanical Recycling on Properties in Injection Molding of Fiber-Reinforced Polypropylene
T. Evens et al.
INTERNATIONAL POLYMER PROCESSING (2019)
Closing the loop for PET, PE and PP waste from households: Influence of material properties and product design for plastic recycling
M. K. Eriksen et al.
WASTE MANAGEMENT (2019)
White and wonderful? Microplastics prevail in snow from the Alps to the Arctic
Melanie Bergmann et al.
SCIENCE ADVANCES (2019)
Packaging materials with desired mechanical and barrier properties and full chemical recyclability
Ainara Sangroniz et al.
NATURE COMMUNICATIONS (2019)
The Yield Prediction of Synthetic Fuel Production from Pyrolysis of Plastic Waste by Levenberg-Marquardt Approach in Feedforward Neural Networks Model
Faisal Abnisa et al.
POLYMERS (2019)
Upcycling Single-Use Polyethylene into High-Quality Liquid Products
Gokhan Celik et al.
ACS CENTRAL SCIENCE (2019)
Alkane Cross-Metathesis Reaction between Light and Heavy Linear Alkanes, on a Silica Supported Well-Defined Single-Site Catalyst
Natalia Morlanes et al.
ACS CATALYSIS (2019)
Toward Infinitely Recyclable Plastics Derived from Renewable Cyclic Esters
Xiaoyan Tang et al.
CHEM (2019)
The impact of collection portfolio expansion on key performance indicators of the Dutch recycling system for Post-Consumer Plastic Packaging Waste, a comparison between 2014 and 2017
Marieke Brouwer et al.
WASTE MANAGEMENT (2019)
Organocatalysis for depolymerisation
Coralie Jehanno et al.
POLYMER CHEMISTRY (2019)
Is Managerial Myopia a Persistent Governance Problem?
David J. Denis
JOURNAL OF APPLIED CORPORATE FINANCE (2019)
Whither Plastics?-Petrochemicals, plastics and sustainability in a garbage-riddled world
Michael Jefferson
ENERGY RESEARCH & SOCIAL SCIENCE (2019)
The Commitment of Packaging Industry in the Framework of the European Strategy for Plastics in a Circular Economy
Eleonora Foschi et al.
ADMINISTRATIVE SCIENCES (2019)
Black plastics: Linear and circular economies, hazardous additives and marine pollution
Andrew Turner
ENVIRONMENT INTERNATIONAL (2018)
Probabilistic Material Flow Analysis of Seven Commodity Plastics in Europe
Delphine Kawecki et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)
Microplastics and Nanoplastics in Aquatic Environments: Aggregation, Deposition, and Enhanced Contaminant Transport
Olubukola S. Alimi et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)
Sustainable approach to recycling of multilayer flexible packaging using switchable hydrophilicity solvents
Tamari Mumladze et al.
GREEN CHEMISTRY (2018)
An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling
John N. Hahladakis et al.
JOURNAL OF HAZARDOUS MATERIALS (2018)
China is not winning the gene-editing race
Michael Le Page
NEW SCIENTIST (2018)
The evolution of waste-to-energy incineration: A review
Luke Makarichi et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Plastic recycling in the Nordics: A value chain market analysis
Leonidas Milios et al.
WASTE MANAGEMENT (2018)
Transportation fuel from plastic: Two cases of study
Gian Claudio Faussone
WASTE MANAGEMENT (2018)
Factors influencing the recycling rate under the volume-based waste fee system in South Korea
Seejeen Park
WASTE MANAGEMENT (2018)
Plastic flexible films waste management - A state of art review
O. Horodytska et al.
WASTE MANAGEMENT (2018)
Depolymerization of Waste Plastics to Monomers and Chemicals Using a Hydrosilylation Strategy Facilitated by Brookhart's Iridium(III) Catalyst
Louis Monsigny et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
MODELLING AND SIMULATING THE DYNAMICS OF THE EUROPEAN DEMAND FOR BIO-BASED PLASTICS
D. Horvat et al.
INTERNATIONAL JOURNAL OF SIMULATION MODELLING (2018)
USING LEGISLATION TO REDUCE ONE-TIME PLASTIC BAG USAGE
Richard J. Kish
ECONOMIC AFFAIRS (2018)
Separate collection of plastic waste, better than technical sorting from municipal solid waste?
Alexander Feil et al.
WASTE MANAGEMENT & RESEARCH (2017)
POLYMER MECHANOCHEMISTRY Up another rung
Stephen L. Craig
NATURE CHEMISTRY (2017)
Reparation of recycled acrylonitrile-butadiene-styrene by pyromellitic dianhydride: Reparation performance evaluation and property analysis
Yingchun Li et al.
POLYMER (2017)
Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review
Gartzen Lopez et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
The future of plastics recycling Chemical advances are increasing the proportion of polymer waste that can be recycled
Jeannette M. Garcia et al.
SCIENCE (2017)
Combining polyethylene and polypropylene: Enhanced performance with PE/iPP multiblock polymers
James M. Eagan et al.
SCIENCE (2017)
From waste plastics to industrial raw materials: A life cycle assessment of mechanical plastic recycling practice based on a real-world case study
Fu Gu et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2017)
Recycling of plastic waste: Screening for brominated flame retardants (BFRs)
K. Pivnenko et al.
WASTE MANAGEMENT (2017)
Reducing single-use plastic shopping bags in the USA
Travis P. Wagner
WASTE MANAGEMENT (2017)
Production, use, and fate of all plastics ever made
Roland Geyer et al.
SCIENCE ADVANCES (2017)
Chemical recycling of waste plastics for new materials production
AliReza Rahimi et al.
NATURE REVIEWS CHEMISTRY (2017)
Municipal Plastic Waste Composition Study at Transfer Station of Bangkok and Possibility of its Energy Recovery by Pyrolysis
Chinnathan Areeprasert et al.
3RD INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT RESEARCH, ICEER 2016 (2017)
From polymer waste to potential main industrial products: Actual state of recycling and recovering
Janusz Datta et al.
CRITICAL REVIEWS IN ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2016)
Recycling of poly(ethylene terephthalate) - A review focusing on chemical methods
B. Geyer et al.
EXPRESS POLYMER LETTERS (2016)
Feedstock Recycling via Waste Plastic Pyrolysis
Shogo Kumagai et al.
JOURNAL OF THE JAPAN PETROLEUM INSTITUTE (2016)
Reaction: Polymer Chemistries Enabling Cradle-to-Cradle Life Cycles for Plastics
Brett A. Helms et al.
CHEM (2016)
Catalyst: Design Challenges for the Future of Plastics Recycling
Jeannette M. Garcia
CHEM (2016)
Efficient and selective degradation of polyethylenes into liquid fuels and waxes under mild conditions
Xiangqing Jia et al.
SCIENCE ADVANCES (2016)
Mechanical Properties of Extensively Recycled High Density Polyethylene
P. Oblak et al.
MECHANICS OF COMPOSITE AND MULTIFUNCTIONAL MATERIALS, VOL 7 (2016)
Accelerating a Mechanically Driven anti-Woodward-Hoffmann Ring Opening with a Polymer Lever Arm Effect
Junpeng Wang et al.
JOURNAL OF ORGANIC CHEMISTRY (2015)
Mechanics of mechanochemically responsive elastomers
Qiming Wang et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2015)
Tuning Crystalline Morphology of High-Density Polyethylene by Tailoring its Molecular Weight Distribution for Coupling with a Secondary Flow Field
Quan-Ping Zhang et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
The recycling of material culture today and during the Paleolithic
Daniel S. Amick
QUATERNARY INTERNATIONAL (2015)
Polyester Fiber Production Using Virgin and Recycled PET
J. C. Tapia-Picazo et al.
FIBERS AND POLYMERS (2014)
Recent Developments in the Chemical Recycling of Postconsumer Poly(ethylene terephthalate) Waste
Neena George et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Chemical depolymerisation of PET complex waste: hydrolysis vs. glycolysis
Alicia Aguado et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2014)
Recent Advances in the Fabrication of Nanostructured Barrier Films
Ankush A. Gokhale et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2014)
Model Studies of the Kinetics of Ester Hydrolysis under Stretching Force
Sergey Akbulatov et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
Comparison of the predictive performance of the Bell-Evans, Taylor-expansion and statistical-mechanics models of mechanochemistry
Yancong Tian et al.
CHEMICAL COMMUNICATIONS (2013)
A backbone lever-arm effect enhances polymer mechanochemistry
Hope M. Klukovich et al.
NATURE CHEMISTRY (2013)
Inner Structure and Mechanical Properties of Recycled Polypropylene
Shigeru Yao et al.
NIHON REOROJI GAKKAISHI (2013)
Advanced chemical recycling of poly(ethylene terephthalate) through organocatalytic aminolysis
Kazuki Fukushima et al.
POLYMER CHEMISTRY (2013)
Recent Advances in Polycarbonate Recycling: A Review of Degradation Methods and Their Mechanisms
E. V. Antonakou et al.
WASTE AND BIOMASS VALORIZATION (2013)
Alkane Metathesis by Tandem Alkane-Dehydrogenation-Olefin-Metathesis Catalysis and Related Chemistry
Michael C. Haibach et al.
ACCOUNTS OF CHEMICAL RESEARCH (2012)
Light olefins from HDPE cracking in a two-step thermal and catalytic process
M. Artetxe et al.
CHEMICAL ENGINEERING JOURNAL (2012)
Covalent Mechanochemistry: Theoretical Concepts and Computational Tools with Applications to Molecular Nanomechanics
Jordi Ribas-Arino et al.
CHEMICAL REVIEWS (2012)
Recyclability Potential Index (RPI): The concept and quantification of RPI for textile fibres
Subramanian Senthilkannan Muthu et al.
ECOLOGICAL INDICATORS (2012)
Chain branching detection by Cole-Cole modeling of rheological properties changes during PET mechanical recycling
K. L. Nait-Ali et al.
POLYMER TESTING (2012)
Chemomechanics: chemical kinetics for multiscale phenomena
Zhen Huang et al.
CHEMICAL SOCIETY REVIEWS (2011)
The Entropic and Enthalpic Contributions to Force-Dependent Dissociation Kinetics of the Pyrophosphate Bond
Matthew Hermes et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Kinetic analysis and modelling of PET macromolecular changes during its mechanical recycling by extrusion
Linda K. Nait-Ali et al.
POLYMER DEGRADATION AND STABILITY (2011)
Type of Polypropylene Material Significantly Influences the Migration of Antioxidants from Polymer Packaging to Food Simulants During Microwave Heating
Jonas Alin et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2010)
Pyrolysis of Polyvinyl Chloride (PVC)-Containing Mixed Plastic Wastes for Recovery of Hydrocarbons
N. Miskolczi et al.
ENERGY & FUELS (2009)
Chemical recycling of plastics using sub- and supercritical fluids
Motonobu Goto
JOURNAL OF SUPERCRITICAL FLUIDS (2009)
Transport and release of chemicals from plastics to the environment and to wildlife
Emma L. Teuten et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Applications and societal benefits of plastics
Anthony L. Andrady et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Plastics recycling: challenges and opportunities
Jefferson Hopewell et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Accumulation and fragmentation of plastic debris in global environments
David K. A. Barnes et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY B-BIOLOGICAL SCIENCES (2009)
Chemical recycling of PET waste into hydrophobic textile dyestuffs
S. R. Shukla et al.
POLYMER DEGRADATION AND STABILITY (2009)
Polymer micro and nanocomposites: Structure, interactions, properties
Janos Moczo et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2008)
Effects of reprocessing on the structure and properties of polyamide 6 nanocomposites
Izaro Goitisolo et al.
POLYMER DEGRADATION AND STABILITY (2008)
Recycling of waste PET into useful textile auxiliaries
S. R. Shukla et al.
WASTE MANAGEMENT (2008)
Monomer recovery of waste plastics by liquid phase decomposition and polymer synthesis
Akio Ikeda et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Recycling of fiber reinforced plastics using depolymerization by solvothermal reaction with catalyst
Tomoko Iwaya et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP)
D. S. Achilias et al.
JOURNAL OF HAZARDOUS MATERIALS (2007)
Methods for polyurethane and polyurethane composites, recycling and recovery: A review
Khalid Mahmood Zia et al.
REACTIVE & FUNCTIONAL POLYMERS (2007)
Oligomeric chain extenders for economic reprocessing and recycling of condensation plastics
M. Villalobos et al.
ENERGY (2006)
Universal scaling for polymer chain scission in turbulence
Siva A. Vanapalli et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2006)
Quantification of ultrasound-induced chain scission in PdII-phosphine coordination polymers
Jos M. J. Paulusse et al.
CHEMISTRY-A EUROPEAN JOURNAL (2006)
Catalytic alkane metathesis by tandem alkane dehydrogenation olefin metathesis
AS Goldman et al.
SCIENCE (2006)
Ultrasound-induced site-specific cleavage of azo-functionalized poly(ethylene glycol)
KL Berkowski et al.
MACROMOLECULES (2005)
Characterization of aluminized polyethylene blends via mechanical recycling
MMD Paula et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Mechanochemistry: The mechanical activation of covalent bonds
MK Beyer et al.
CHEMICAL REVIEWS (2005)
Investigation of the origin of tensile stress-induced rate enhancements in the photochemical degradation of polymers
R Chen et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2004)
Nature of mechanoradical formation of substituted celluloses as studied by electron spin resonance
Y Sasai et al.
CHEMICAL & PHARMACEUTICAL BULLETIN (2004)
Flow-induced chain scission as a physical route to narrowly distributed, high molar mass polymers
BA Buchholz et al.
POLYMER (2004)
The mechanism of cavitation-induced polymer scission; experimental and computational verification
MWA Kuijpers et al.
POLYMER (2004)
Distributed midpoint chain scission in ultrasonic degradation of polymers
G Sivalingam et al.
AICHE JOURNAL (2004)
Molecular breakdown of corn starch by thermal and mechanical effects
RM van den Einde et al.
CARBOHYDRATE POLYMERS (2004)
Origin of tensile stress-induced rate increases in the photochemical degradation of polymers
R Chen et al.
MACROMOLECULES (2004)
Reversible mechanochemistry of a Pd-II coordination polymer
JMJ Paulusse et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2004)
Degradation of post-consumer polypropylene materials exposed to simulated recycling -: mechanical properties
A Jansson et al.
POLYMER DEGRADATION AND STABILITY (2003)
Phase behavior of highly immiscible polymer blends stabilized by a balanced block copolymer surfactant
JH Lee et al.
MACROMOLECULES (2003)
Recent innovations in barrier technologies for plastic packaging - a review
J Lange et al.
PACKAGING TECHNOLOGY AND SCIENCE (2003)
Effect of diaminotoluene on the decomposition of polyurethane foam waste in superheated water
ZY Dai et al.
POLYMER DEGRADATION AND STABILITY (2002)
The selective dissolution/precipitation technique for polymer recycling: a pilot unit application
G Pappa et al.
RESOURCES CONSERVATION AND RECYCLING (2001)
Ultra barrier flexible substrates for flat panel displays
PE Burrows et al.
DISPLAYS (2001)
Effects of recycling on the microstructure and the mechanical properties of isotactic polypropylene
J Aurrekoetxea et al.
JOURNAL OF MATERIALS SCIENCE (2001)
Study of thermal and mechanical properties of virgin and recycled poly(ethylene terephthalate) before and after injection molding
N Torres et al.
EUROPEAN POLYMER JOURNAL (2000)
Structure and rheology of recycled PET modified by reactive extrusion
L Incarnato et al.
POLYMER (2000)
Share Paper
