Related references
Note: Only part of the references are listed.3D-printing of highly translucent ORMOCER®-based resin using light absorber for high dimensional accuracy
Carina Kolb et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2021)
Selectively Metalizable Stereolithography Resin for Three-Dimensional DC and High-Frequency Electronics via Hybrid Additive Manufacturing
Ji Li et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Metal-plastic hybrid 3D printing using catalyst-loaded filament and electroless plating
Jing Zhan et al.
ADDITIVE MANUFACTURING (2020)
Research on laser-assisted selective metallization of a 3D printed ceramic surface
Feng Zhao et al.
RSC ADVANCES (2020)
Photocurable Elastomer Composites with SiO2-Mediated Cross-Links for Mechanically Durable 3D Printing Materials
Gwajeong Jeong et al.
ACS APPLIED POLYMER MATERIALS (2020)
Volumetric 3D-Printed Antennas, Manufactured via Selective Polymer Metallization
Dmitry Filonov et al.
PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2019)
New Process for Selective Additive Metallization of Alumina Ceramic Substrates
E. Ermantraut et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2019)
Multimaterial 3D Printing of Highly Stretchable Silicone Elastomers
Lu-yu Zhou et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
One-step electrodeposition of copper on conductive 3D printed objects
Myung Jun Kim et al.
ADDITIVE MANUFACTURING (2019)
Rapid Open-Air Digital Light 3D Printing of Thermoplastic Polymer
Shihong Deng et al.
ADVANCED MATERIALS (2019)
Metal-Organic Decomposition Ink for Printed Electronics
Yejung Choi et al.
ADVANCED MATERIALS INTERFACES (2019)
A facile process to manufacture high performance copper layer on ceramic material via biomimetic modification and electroless plating
Yan Wang et al.
COMPOSITES PART B-ENGINEERING (2019)
Electroless Deposition-Assisted 3D Printing of Micro Circuitries for Structural Electronics
Sanghyeon Lee et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Laser-Induced Selective Metallization on Polymer Substrates Using Organocopper for Portable Electronics
Jihai Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Selective Metallization of 3D Printable Thermoplastic Polyurethanes
Assel Ryspayeva et al.
IEEE ACCESS (2019)
Micro/nanostructured porous ZnO as a new DGT binding phase for selective measurement of Cu(II) in water
Xianbiao Wang et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Study of 3-D Printed Conical Inductors for Broadband RF Applications
J. M. Lopez-Villegas et al.
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2018)
Influences of diantimony trioxide on laser-marking properties of thermoplastic polyurethane
Junfeng Cheng et al.
POLYMER DEGRADATION AND STABILITY (2018)
Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices
ChuanYi Foo et al.
SCIENTIFIC REPORTS (2018)
Binuclear Copper Complex Ink as a Seed for Electroless Copper Plating Yielding >70% Bulk Conductivity on 3DPrinted Polymers
Yousef Farraj et al.
ADVANCED MATERIALS INTERFACES (2018)
3D printing a mechanically-tunable acrylate resin on a commercial DLP-SLA printer
Joseph Borrello et al.
ADDITIVE MANUFACTURING (2018)
Environmentally benign metallization of material extrusion technology 3D printed acrylonitrile butadiene styrene parts using physical vapor deposition
Justin White et al.
ADDITIVE MANUFACTURING (2018)
Electroless Deposition of Palladium on Macroscopic 3D-Printed Polymers with Dense Microlattice Architectures for Development of Multifunctional Composite Materials
Christopher G. Jones et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
One-pot synthesis of cellulose-templated copper nanoparticles with antibacterial properties
Alireza Eivazihollagh et al.
MATERIALS LETTERS (2017)
Exposing Metal Oxide with Intrinsic Catalytic Activity by Near-Infrared Pulsed Laser: Laser-Induced Selective Metallization on Polymer Materials
Jihai Zhang et al.
ADVANCED MATERIALS INTERFACES (2017)
Hydroprinting Conductive Patterns onto 3D Structures
Gabriel Saada et al.
ADVANCED MATERIALS TECHNOLOGIES (2017)
Measuring UV curing parameters of commercial photopolymers used in additive manufacturing
Joe Bennett
ADDITIVE MANUFACTURING (2017)
Hybrid 3D Printing of Soft Electronics
Alexander D. Valentine et al.
ADVANCED MATERIALS (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Laser-induced selective metallization of polypropylene doped with multiwall carbon nanotubes
Karolis Ratautas et al.
APPLIED SURFACE SCIENCE (2017)
Selective Metallization Induced by Laser Activation: Fabricating Metallized Patterns on Polymer via Metal Oxide Composite
Jihai Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Selective metallization on copper aluminate composite via laser direct structuring technology
Jong-uk Yang et al.
COMPOSITES PART B-ENGINEERING (2017)
Fabricating Metallic Circuit Patterns on Polymer Substrates through Laser and Selective Metallization
Jihai Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
3D Printing of Cantilever-Type Microstructures by Stereolithography of Ferromagnetic Photopolymers
Caterina Credi et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Enhanced Interfacial Strength and UV Shielding of Aramid Fiber Composites through ZnO Nanoparticle Sizing
Brendan A. Patterson et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Electroless Plating of NiP and Cu on Polylactic Acid and Polyethylene Terephthalate Glycol-Modified for 3D Printed Flexible Substrates
R. Bernasconi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2016)
Laser-Marking Mechanism of Thermoplastic Polyurethane/Bi2O3 Composites
Wei Zhong et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Sintering Kinetics of Inkjet-Printed Conductive Silver Lines on Insulating Plastic Substrate
Wenchao Zhou et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2015)
Initiator-Integrated 3D Printing Enables the Formation of Complex Metallic Architectures
Xiaolong Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Laser Direct Synthesis and Patterning of Silver Nano/Microstructures on a Polymer Substrate
Yi-Kai Liu et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Bethany C. Gross et al.
ANALYTICAL CHEMISTRY (2014)
Utilization of magnesium and zinc oxide nano-adsorbents as potential materials for treatment of copper electroplating industry wastewater
Zahida Rafiq et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2014)
ZnO hollow microspheres with exposed porous nanosheets surface: Structurally enhanced adsorption towards heavy metal ions
Xianbiao Wang et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2013)
Use of silane coupling agent for surface modification of zinc oxide as inorganic filler and preparation of poly(amide-imide)/zinc oxide nanocomposite containing phenylalanine moieties
Shadpour Mallakpour et al.
BULLETIN OF MATERIALS SCIENCE (2012)
Cost-effective large-scale synthesis of ZnO photocatalyst with excellent performance for dye photodegradation
Chungui Tian et al.
CHEMICAL COMMUNICATIONS (2012)
Conformal Printing of Electrically Small Antennas on Three-Dimensional Surfaces
Jacob J. Adams et al.
ADVANCED MATERIALS (2011)
Mass production of micro/nanostructured porous ZnO plates and their strong structurally enhanced and selective adsorption performance for environmental remediation
Xianbiao Wang et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Critical energy for photopolymerization of ceramic suspensions in acrylate monomers
Vladislava Tomeckova et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)
Cure depth for photopolymerization of ceramic suspensions
Vladislava Tomeckova et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)
Selective Electroless Metallization of Patterned Polymeric Films for Lithography Applications
Daniel Zabetakis et al.
ACS APPLIED MATERIALS & INTERFACES (2009)
ZnO hierarchical micro/nanoarchitectures: Solvothermal synthesis and structurally enhanced photocatalytic performance
Fang Lu et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
The acid-base properties of the surface of native zinc oxide layers:: An XPS study of adsorption of 1,2-diaminoethane
G. Ballerini et al.
APPLIED SURFACE SCIENCE (2007)
Micromolding of three-dimensional metal structures by electroless plating of photopolymerized resin
Kohki Mukai et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS (2007)
Preparation and characterization of transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency
YQ Li et al.
POLYMER (2006)
Study of mechanism of electroless copper coating of fly-ash cenosphere particles
S Shukla et al.
APPLIED SURFACE SCIENCE (2001)
Share Paper
