4.7 Article

Super-absorbent swellable polymer as grouting material for treatment of karst water inrush

Related references

Note: Only part of the references are listed.
Article Thermodynamics

Proportion optimization of grouting materials for roadways with soft surrounding mass

Chenliang Hao et al.

Summary: Using portland cement, emery and fly ash as main raw materials, the effect of different ratios on grout performance was systematically analyzed in laboratory tests. An optimized mixture ratio was determined and field tests showed better reinforcement of weak and broken rock mass.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2021)

Article Toxicology

Effect of superabsorbent polymers (SAP) and metal organic frameworks (MOF) wiping sandwich patch on human skin decontamination and detoxification in vitro

Yachao Cao et al.

Summary: A new method combining wet and dry decontamination technologies with new materials was developed to address the challenges of skin decontamination from chemical warfare agents. The study utilized an in vitro human skin diffusion system to model dermal exposures of radiolabeled chemical warfare simulants, followed by surface decontamination using metal organic frameworks (MOFs), super-absorbent polymers (SAP), and/or dermal decontamination gel (DDGel). Results showed the effectiveness of SAP and MOF in decontamination.

TOXICOLOGY LETTERS (2021)

Review Anesthesiology

Mortality prediction models in the adult critically ill: A scoping review

Britt E. Keuning et al.

ACTA ANAESTHESIOLOGICA SCANDINAVICA (2020)

Article Engineering, Chemical

Environmental Friendly Radiation Hard d-Limonene and Laccol Copolymers Synthesized via Cationic Copolymerization

Imalka H. A. M. Arachchilage et al.

POLYMER ENGINEERING AND SCIENCE (2020)

Article Computer Science, Interdisciplinary Applications

Mechanism of water inrush in fractures and block collapse under hydraulic pressure

Jing Wang et al.

MATHEMATICS AND COMPUTERS IN SIMULATION (2020)

Review Mining & Mineral Processing

A critical review on the developments of rock support systems in high stress ground conditions

Masoud Ghorbani et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2020)

Article Mining & Mineral Processing

Physical model test study on shear strength characteristics of slope sliding surface in Nanfen open-pit mine

Zhigang Tao et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2020)

Article Construction & Building Technology

Grouting sealing mechanism of water gushing in karst pipelines and engineering application

Haiyan Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Study on the mechanical properties of polyurethane (PU) grouting material of different geometric sizes under uniaxial compression

Manjun Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Green & Sustainable Science & Technology

Comprehensive evaluation on water resource carrying capacity based on DPESBR framework: A case study in Guiyang, southwest China

Tao Peng et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Article Green & Sustainable Science & Technology

Effects of Super-Absorbent Polymer on Soil Remediation and Crop Growth in Arid and Semi-Arid Areas

Fang Yang et al.

SUSTAINABILITY (2020)

Article Engineering, Chemical

Capturing the flow field of bubbly flows using BTV in high viscosity liquid

Deyang Gao et al.

CHEMICAL ENGINEERING SCIENCE (2020)

Article Construction & Building Technology

Effects of the charge density of anionic copolymers on the properties of fresh cement pastes

Jian Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Nondestructive testing of strength of sleeve grouting material in prefabricated structure based on surface hardness method

Sheng Gu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Effect of tailings fineness on flow, strength, ultrasonic and microstructure characteristics of cemented paste backfill

Jingping Qiu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Optimal formulation design of polymer-modified cement based grouting material for loose deposits

Cong Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Experimental and numerical investigation on mechanical properties of grouted-sleeve splices

Chao Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Properties of red mud blended with magnesium phosphate cement paste: Feasibility of grouting material preparation

Jian Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Mining & Mineral Processing

Development of a multiple level underground limestone mine from geology through mine planning

Christopher Newman et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2020)

Article Mining & Mineral Processing

The future of underground spatial planning and the resulting potential risks from the point of view of mining subsidence engineering

Carolina Bruecker et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2020)

Article Construction & Building Technology

Investigation and practical application of a new cementitious anti-washout grouting material

Shucai Li et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Water Resources

Management and Utilization of High-Pressure Floor-Confined Water in Deep Coal Mines

Jinshuai Guo et al.

MINE WATER AND THE ENVIRONMENT (2019)

Article Construction & Building Technology

Prediction of karst for tunnelling using fuzzy assessment combined with geological investigations

Kai Zhang et al.

TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)

Article Construction & Building Technology

Formulation and performance of grouting materials for underwater shield tunnel construction in karst ground

Cong Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Grouting performance improvement for natural hydraulic lime-based grout via incorporating silica fume and silicon-acrylic latex

Shuqiang Xu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Mining & Mineral Processing

Groundwater impact of open cut coal mine and an assessment methodology: A case study in NSW

Zhao Liang et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2017)

Article Construction & Building Technology

Variables controlling strength development of self-compacting earth-based construction

Cong Ma et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Mining & Mineral Processing

Seepage characteristics of collapse column fillings

Zhang Boyang et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2016)

Article Mining & Mineral Processing

Fluid-solid coupling analysis of rock pillar stability for concealed karst cave ahead of a roadway based on catastrophic theory

Zhao Yanlin et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2014)

Article Mining & Mineral Processing

Support technology for mine roadways in extreme weakly cemented strata and its application

Meng Qingbin et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2014)