Related references
Note: Only part of the references are listed.
Article
Thermodynamics
Aamir Ali et al.
Summary: The study investigates the influence of Cu-Al2O3MHD hybrid nanofluid on heat transfer and flow through mathematical modeling and computations, revealing a decrease in temperature and an increase in fluid velocity with increasing volume fraction. Additionally, the change in fluid temperature under heat source/sink conditions was examined.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
(2021)
Article
Thermodynamics
S. Saranya et al.
Summary: This study investigates the shape effect of Al2O3 nanoparticles in a nanofluid flow, finding that platelet-shaped nanoparticles have the highest dynamic viscosity and blade-shaped nanoparticles have the strongest thermal conductivity. Friction coefficient is higher with magnetic field strength and disk radial stretching, while heat transfer rate significantly increases when neglecting magnetic field and radiation effects.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Thermodynamics
Muhammad Imran et al.
Summary: The study uses Carreau nanomaterial and Buongiorno's nanofluid model to analyze the characteristics of bioconvection effects in magnetic ferrofluids, and the results show that increasing Brownian motion and thermophoresis parameters will raise the thermal profile.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Thermodynamics
Mouna Ben Henda et al.
Summary: This research examines the bioconvection flow of third grade nanofluid in specific conditions, obtaining numerical results for the discretized system through a powerful numerical algorithm. It reveals the effects of various physical parameters on flow characteristics, highlighting the significant impact of exponential space-based heat source and heat source parameter on nanofluid temperature.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Thermodynamics
Abdulmajeed Almaneea
Summary: The study focused on thermal enhancement in hybrid nano-ferrofluid and conducted a parametric study on fluid flow and heat transfer energy based on computed solutions of conservation equations. Results indicated that different porous media have varying resistive forces on fluid flow, affecting convective heat transfer. Dissipation effects led to increased temperature and thermal boundary layer thickness. Hybrid nanofluid showed stronger heat dissipation than nanofluid, with higher wall shear stress and lower Nusselt number with increased ferro-hydrodynamic parameter. Additionally, viscous dissipation resulted in increased heat transfer rate in the presence of a porous medium compared to fluid without it.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Thermodynamics
Umair Khan et al.
Summary: The current study investigates the advantages of using hybrid nanofluid in improving thermal performance and heat transfer rate in cooling and heating processes, focusing on the impact of non-Fourier heat flux and magnetic effects on temperature and velocity in Blasius-Rayleigh-Stokes flow. The results show that hybrid nanoparticles increase temperature but decrease velocity, while acute angles accelerate velocity but decelerate temperature, demonstrating the efficiency and reliability of the proposed technique compared to previous outcomes.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Chemistry, Physical
Alphonsa Mathew et al.
Summary: The study investigates the effects of multiple slip and nanoparticle shape on blood-based silver nanofluid, utilizing mathematical modeling and numerical methods to analyze the impacts of different parameters on thermal properties, as well as evaluating the shape effect of nanoparticles.
SURFACES AND INTERFACES
(2021)
Article
Mathematics, Applied
Nilankush Acharya
Summary: This study investigates the hydrothermal features of chemically reactive nanofluidic transport over an inclined spinning disk, analyzing the impact of surface permeability on hydrothermal integrity and using spectral quasi linearization method to solve the equations and quantify the effects of various parameters on transport and stresses. The results show the influence of chemical reactions and heat source/sink on the transport processes.
APPLIED MATHEMATICS AND COMPUTATION
(2021)
Article
Thermodynamics
M. Ijaz Khan
Summary: This research examines the effect of entropy generation through a non-linear radiative flow of viscous fluid of hybrid nanoparticles over a stretchable rotating disk. Various parameters such as mixed convection parameter, porosity parameter, velocities, thermal slips parameters, stretching parameter, non-linear radiation parameter, and Reynolds number are studied for their impact on radial and tangential velocity profiles, temperature profile, as well as entropy generation and heat transfer rates. The governing problem is numerically solved using bvp4c techniques.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2021)
Article
Physics, Applied
M. Ijaz Khan et al.
Summary: This study aims to analyze the thermal mechanism of mixed convection flow of Reiner-Philippoff nanofluid, with a focus on entropy generation. By modifying the thermal performances of nanomaterials and utilizing specific relations and similarity variables, the study explores the importance of entropy generation and heat and mass transfer phenomenon through numerical simulations and graphical analysis.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B
(2021)
Article
Materials Science, Multidisciplinary
Umair Rashid et al.
Summary: This study investigates the impact of different shapes of nanoparticles on the flow of (Ag-TiO2)/water hybrid nanofluid, using the homotopy analysis method to find analytical solutions and comparing the results with previous research. The study shows that spherical nanoparticles exhibit better temperature disturbance and heat transfer in hybrid nanofluid flow.
RESULTS IN PHYSICS
(2021)
Article
Thermodynamics
Nurul Amira Zainal et al.
Summary: This study analyzed the unsteady electro-magnetohydrodynamic stagnation point flow in a hybrid nanofluid on a stretching/shrinking sheet, and found that the inclusion of nanoparticles increases the skin friction coefficient and local Nusselt number. The coordination of the electric and magnetic fields delays the progression of the fluid, while the unsteadiness parameter has a decreasing impact on heat transfer performance.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2021)
Article
Engineering, Multidisciplinary
Umair Khan et al.
Summary: The research explores mixed convective stagnation point flow of a hybrid nanofluid over a yawed cylinder with radiation impact, revealing significant results related to yaw angle, hybrid nanoparticle volume fraction, mixed convection, radiation, and non-similarity phenomena. The impact of the yaw angle on the velocity and temperature profiles of the hybrid nanofluid in different flow directions is discussed, along with the effects of hybrid nanoparticles on velocity and temperature in both assisting and opposing flow scenarios.
ALEXANDRIA ENGINEERING JOURNAL
(2021)
Article
Physics, Applied
Yu-Ming Chu et al.
Summary: The study examines the novel thermal consequences of thermal radiation, Joule heating, and activation energy in bioconvection flow of tangent hyperbolic nanofluid. It investigates the heat and mass transfer in non-Newtonian fluid flow using modified flux relations, along with accounting for Brownian movement and thermophoresis diffusions. The study simplifies governing formulated frameworks using appropriate similarity transformations and carries out a shooting scheme to obtain numerical outcomes to the nonlinear system, providing important insights for nanotechnology and bioengineering.
MODERN PHYSICS LETTERS B
(2021)
Article
Thermodynamics
Yun-Jie Xu et al.
Summary: The research on nanoparticles in thermal and process engineering is expanding due to their multidisciplinary significance, with mixed fluids technology improving thermal efficiency and induced magnetic fields enhancing thermal transportation processes.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Thermodynamics
Hanumesh Vaidya et al.
Summary: This article focuses on the heat and mass transfer characteristics of mixed convective flow of an electrically conducting nanofluid past a slender plate, considering viscous dissipation and chemical reaction. The analysis involves zero nanoparticle mass flux, convective boundary conditions, and thermophoretic and Brownian aspects for nanoliquid using Buongiorno's relations. The study uses similarity quantities to obtain dimensionless flow field equations and solves them analytically through the optimal homotopy analysis method (OHAM). The results show that higher values of the modified Hartmann number increase the velocity profile while suppressing the temperature profile, and the accuracy of contemporary numerical simulations validates the novelty of the investigation.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Thermodynamics
Kaouther Ghachem et al.
Summary: The study of hybrid nanofluid enhanced heat transfer in a cross flow micro heat exchanger with rectangular wavy channels reveals that choosing the appropriate flow velocity and nanoparticles volume fraction can reduce the size of the heat exchanger, with the addition of nanoparticles having a significant impact only at high velocities. A trade-off between the relevant controlling parameters is necessary to ensure optimal efficiency.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Thermodynamics
A. S. Alhamaly et al.
Summary: Stagnation point flow on a linearly stretching surface with heat transfer analysis using nanofluid with variable properties results in larger heat transfer rates compared to homogenous property fluid. The presence of a large volume fraction of nanoparticles in the boundary layer significantly enhances the heat transfer. Additionally, the Prandtl number, stretching rate of the surface, and nanoparticles volume fraction have significant influence on the Nusselt number.
CASE STUDIES IN THERMAL ENGINEERING
(2021)
Article
Engineering, Chemical
Mustafa Turkyilmazoglu
Summary: This paper investigates the stagnation point of oncoming flow impinging on a stretchable flat plate or a circular cylinder, with exact solutions targeted for both momentum and thermal fields. The identified analytical solutions contribute further exact solutions to the Navier-Stokes and energy equations. Findings reveal that stretching has a suppressing effect on the axial velocity and temperature distributions, while the character of flow impingement is closely adjusted by the relevant physical parameters. Heat transfer rates from the surfaces in both flow geometries are enhanced by the action of walls, with more cooled surfaces in the presence of wall suction.
CHEMICAL ENGINEERING SCIENCE
(2021)
Article
Physics, Multidisciplinary
Seyed Mahdi Mousavi et al.
Summary: This study investigates the two-dimensional MHD Casson flow past a linearly stretching/shrinking sheet with suction, radiation, and convective boundary condition effects by employing experimental relations to approximate the effective thermophysical properties of a water/MgO-Ag hybrid nanofluid. It also considers dual solutions and stability analysis, demonstrating the importance of selective experimental relations in future numerical modeling of hybrid nanofluids. Results show an enhancement of the Casson fluid parameter range with increasing radiation parameter, suction parameter, and second nanoparticle mass, as well as the acceleration of similarity velocity profiles in the hydrodynamic boundary layer due to a magnetic field applied normal to the sheet.
CHINESE JOURNAL OF PHYSICS
(2021)
Article
Physics, Applied
Samaira Aziz et al.
Summary: This research investigates the consequences of motile gyrotactic microorganisms for unsteady Williamson nanofluid induced by bidirectional periodically accelerated surface. It combines magnetic and buoyancy forces with nanoparticles and swimming microorganisms to develop bioconvection in the nanofluid. The impact of reaction rate on concentration distribution is highlighted, while the effect of activation energy parameter is conflicting.
INTERNATIONAL JOURNAL OF MODERN PHYSICS B
(2021)
Article
Chemistry, Physical
J. K. Madhukesh et al.
Summary: The study investigates the flow and heat transfer characteristics of AA7072-AA7075/water-based hybrid nanofluid over a curved stretching sheet, showing that increasing curvature, Newtonian heating, and thermal relaxation parameters improves the heat transfer rate. Novelty lies in the thermal mechanism analysis of AA7072-AA7075 nanoparticles for enhancing heat transfer performance.
JOURNAL OF MOLECULAR LIQUIDS
(2021)
Article
Physics, Multidisciplinary
Nilankush Acharya
Summary: This study investigates the impact of different heated obstacle shapes on the flow patterns of hybrid nanofluid inside a square enclosure, and reveals the effects of various parameters on hydrothermal patterns through experiments and model derivations. The results show that increasing Rayleigh number enhances the isotherms, with circular obstacles exhibiting extreme distortion, while other parameters show opposite effects on isotherms.
EUROPEAN PHYSICAL JOURNAL PLUS
(2021)
Article
Engineering, Multidisciplinary
Muhammad Mubashir Bhatti
Summary: The study focuses on the intra-uterine nanofluid flow of a Jeffrey fluid through a finite asymmetric channel filled with gold nanoparticles. Utilizing lubrication theory and a perturbation approach to account for magnetic and thermal radiation effects, the study derives series results for various parameters affecting velocity mechanism, pressure rise, and temperature profile.
Article
Thermodynamics
A. Abbasi et al.
Summary: The numerical study of oblique stagnation point flow of incompressible Maxwell nanofluid past a stretching cylinder with active and passive controlled nanoparticles concentration condition is presented. The results are validated and compared with existing ones, showing excellent agreement and providing insights for further research.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2021)
Article
Computer Science, Interdisciplinary Applications
Mustafa Turkyilmazoglu
COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE
(2020)
Article
Physics, Multidisciplinary
Nargis Khan et al.
Article
Physics, Multidisciplinary
Mustafa Turkyilmazoglu
EUROPEAN PHYSICAL JOURNAL PLUS
(2020)
Article
Physics, Multidisciplinary
Gangadhar Kotha et al.
Article
Multidisciplinary Sciences
M. K. Nayak et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
(2020)
Article
Engineering, Multidisciplinary
M. Turkyilmazoglu
APPLIED MATHEMATICAL MODELLING
(2019)
Article
Thermodynamics
Saleem Asghar et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2014)
Article
Thermodynamics
S. Nadeem et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES
(2014)
