Two-step thermochemical cycles using fibrous ceria pellets for H2 production and CO2 reduction in packed-bed solar reactors

The thermochemical redox activity and performance of commercial-grade fibrous ceria pellets were determined including fuel production rates and yields from H2O and CO2 dissociation. Two solar reactors integrating the ceria pellets undergoing two-step thermochemical cycling (with temperature-swing between alternating redox steps) were experimentally tested. They consisted of packed-bed tubular and cavity-type solar reactors with direct or indirect heating of the reacting materials. The obtained fuel production rates compared favorably with the performance of other previously considered microstructured ceria materials such as templated foams, sintered felts, bioinspired or ordered macroporous morphologies. H-2 production rates reached 2.3 mL.g-(-1).min-(-1) (with H-2/O-2 ratios approaching 2) in the indirectly-heated tubular reactor after reduction at 1400 degrees C and oxidation upon free cooling below 950 degrees C in steam atmosphere (57% molar content). The highest fuel production rate (similar to 9.5 mL.g(-1).min(-1)) and peak solar-to-fuel energy efficiency (similar to 9.4%) were reached in the directly irradiated cavity-type reactor (with a reduction step at 1400 degrees C under reduced pressure, and an oxidation step in pure CO2 below 950 degrees C). The reduction extent was favored at low pO(2) (delta up to 0.056) and the fuel yields were thus improved notably (up to 315 mu mol/g) by decreasing the total pressure below 0.1 bar during the reduction step. The fuel production rate increased when the oxidation temperature decreased (because the reaction was thermodynamically more favorable). An increase in CO2 partial pressure further promoted the oxidation kinetics (and decreased the pCO/pCO(2) ratio, thus shifting the thermodynamic equilibrium toward CO product). The fibrous ceria structures exhibited stable morphologies with high fuel production performance similar to less scalable porous structures, thus offering the potential for versatile applications in packed-bed solar reactors.

Automated summary

The study of thermochemical redox activity using commercial-grade fibrous ceria pellets in solar reactors showed promising fuel production rates and yields. The fibrous ceria structures exhibited stable morphologies and high fuel production performance, making them a versatile option for packed-bed solar reactors.