Related references
Note: Only part of the references are listed.The effect of addition of Sn to copper on hot compressive deformation mechanisms, microstructural evolution and processing maps
J. Y. Yang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Easy construction of processing maps for metallic alloys using a flow instability criterion based on power-law breakdown
W. J. Kim et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
High-strain-rate solute drag creep in a Cu-22%Sn alloy (Cu17Sn3) with near peritectic composition
J. Y. Yang et al.
MATERIALS CHARACTERIZATION (2020)
Effect of refinement of grains and icosahedral phase on hot compressive deformation and processing maps of Mg-Zn-Y magnesium alloys with different volume fractions of icosahedral phase
T. Y. Kwak et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effects of large amounts of Mg (5-13 wt%) on hot compressive deformation behavior and processing maps of Al-Mg alloys
H. T. Jeong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Comparison of Hot Deformation Behavior Characteristics Between As-Cast and Extruded Al-Zn-Mg-Cu (7075) Aluminum Alloys with a Similar Grain Size
H. T. Jeong et al.
MATERIALS (2019)
Finite element simulation and process optimization of microstructure evolution in the formation of Inconel 718 alloy bolts
Changmin Li et al.
MATERIALS RESEARCH EXPRESS (2019)
Investigation of stress-strain response, microstructure and texture of hot deformed pure molybdenum
Atanu Chaudhuri et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Characterization on hot deformation behavior of Ti-22Al-25Nb alloy using a combination of 3D processing maps and finite element simulation method
Yu Sun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Hot deformation behavior and microstructure analysis of 25Cr3Mo3NiNb steel during hot compression tests
Le Xu et al.
VACUUM (2018)
Extrusion limit diagram of IN 690 super-alloy tube based on hot processing map
Chaoyang Sun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Mesoscale modeling of dynamic recrystallization behavior, grain size evolution, dislocation density, processing map characteristic, and room temperature strength of Ti-6Al-4V alloy forged in the (α plus β) region
Hiroaki Matsumoto et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Hot deformation characterization of ultrahigh strength stainless steel through processing maps generated using different instability criteria
Xiaohui Wang et al.
MATERIALS CHARACTERIZATION (2017)
Constitutive Modeling and Understanding of the Hot Compressive Deformation of Mg-9.5Zn-2.0Y Magnesium Alloy With Reduced Number of Strain-Dependent Constitutive Parameters
Woo Jin Kim et al.
METALS AND MATERIALS INTERNATIONAL (2017)
Forging property, processing map, and mesoscale microstructural evolution modeling of a Ti-17 alloy with a lamellar (α plus β) starting microstructure
Hiroaki Matsumoto et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2017)
Difference in the Hot Compressive Behavior and Processing Maps between the As-cast and Homogenized Al-Zn-Mg-Cu (7075) Alloys
S. Y. Park et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
Microstructural evolution, hot workability, and mechanical properties of Ti-43Al-2Cr-2Mn-0.2Y alloy
Ning Cui et al.
MATERIALS & DESIGN (2016)
Optimizing and identifying the process parameters of AZ31 magnesium alloy in hot compression on the base of processing maps
Xin Shang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Hot Deformation Behaviors and Processing Maps of 2024 Aluminum Alloy in As-cast and Homogenized States
Liang Chen et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Hot deformation behavior and processing map of Al-Si-Mg alloys containing different amount of silicon based on Gleebe-3500 hot compression simulation
Hengcheng Liao et al.
MATERIALS & DESIGN (2015)
Hot workability of AISI 321 and AISI 304 austenitic stainless steels
Richard K. C. Nkhoma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Characterization of hot deformation behavior of extruded ZK60 magnesium alloy using 3D processing maps
Juqiang Li et al.
MATERIALS & DESIGN (2014)
Processing map and hot deformation mechanism of novel nickel-free white copper alloy
Na Liu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Processing map and kinetic analysis for hot deformation of an as-cast AZ91D magnesium alloy
Yan Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Hot deformation behavior and processing map of as-cast AZ61 magnesium alloy
Yan Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Determination of fracture toughness of AZ31 Mg alloy using the cohesive finite element method
X. Guo et al.
ENGINEERING FRACTURE MECHANICS (2012)
Investigation on hot workability characteristics of Inconel 625 superalloy using processing maps
Shengli Guo et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Processing map for hot working characteristics of a wrought 2205 duplex stainless steel
Lei Chen et al.
MATERIALS & DESIGN (2011)
Constitutive modeling of hot deformation behavior of H62 brass
Yan-Hong Xiao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Research on the hot deformation behavior of Ti40 alloy using processing map
Y. Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Hot workability analysis of extruded AZ magnesium alloys with processing maps
F. A. Slooff et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Multi-step 3-D finite element modeling of subsurface damage in machining particulate reinforced metal matrix composites
Chinmaya R. Dandekar et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Analysis of metal workability by integration of FEM and 3-D processing maps
Juan Liu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
High temperature deformation behavior of a near alpha Ti600 titanium alloy
Yong Niu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Benchmarks for finite element analysis of creep continuum damage mechanics
AA Becker et al.
COMPUTATIONAL MATERIALS SCIENCE (2002)
Characteristics of superplasticity domain in the processing map for hot working of as-cast Mg-11.5Li-1.5Al alloy
O Sivakesavam et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Finite element analysis of the stress distributions near damaged Si particle clusters in cast Al-Si alloys
K Gall et al.
MECHANICS OF MATERIALS (2000)
Modeling stress state dependent damage evolution in a cast Al-Si-Mg aluminum alloy
MF Horstemeyer et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2000)