Related references
Note: Only part of the references are listed.Integrated analysis of the energy and economic efficiency of PCM as an indoor decoration element: Application to an apartment building
Beom Yeol Yun et al.
SOLAR ENERGY (2020)
Investigation on the thermal performance of the novel phase change materials wall with radiative cooling
Dongmei Shen et al.
APPLIED THERMAL ENGINEERING (2020)
Thermal performance of a closed collector-storage solar air heating system with latent thermal storage: An experimental study
C. Q. Chen et al.
ENERGY (2020)
Performance improvement of solar thermal systems integrated with phase change materials (PCM), a review
F. S. Javadi et al.
SOLAR ENERGY (2020)
Performance augmentation of a PV/Trombe wall using Al2O3/Water nano-fluid: An experimental investigation
Azhar Ahmed Abed et al.
RENEWABLE ENERGY (2020)
Numerical and experimental studies of a Capillary-Tube embedded PCM component for improving indoor thermal environment
Mohamad Iskandar Jobli et al.
APPLIED THERMAL ENGINEERING (2019)
Thermal properties enhancement and application of a novel sodium acetate trihydrate-formamide/expanded graphite shape-stabilized composite phase change material for electric radiant floor heating
Yutang Fang et al.
APPLIED THERMAL ENGINEERING (2019)
Numerical simulation of a solar cooling system with and without phase change materials in radiant walls of a building
Maria T. Plytaria et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Analysis of underfloor electrical heating system integrated with coconut oil-PCM plates
Khaireldin Faraj et al.
APPLIED THERMAL ENGINEERING (2019)
Phase Change Materials (PCM) for Solar Energy Usages and Storage: An Overview
M. Mofijur et al.
ENERGIES (2019)
Experimental study on the performance of a novel RC-PCM-wall
Wei He et al.
ENERGY AND BUILDINGS (2019)
Preparation and properties of phase change temperature-tuned composite phase change material based on sodium acetate trihydrate-urea/fumed silica for radiant floor heating system
Wanwan Fu et al.
APPLIED THERMAL ENGINEERING (2019)
Preparation of beeswax/multi-walled carbon nanotubes as novel shape-stable nanocomposite phase-change material for thermal energy storage
Nandy Putra et al.
JOURNAL OF ENERGY STORAGE (2019)
Numerical study on the thermal performance of pipe-embedded PCM building envelope in the heating season
Li Zhu et al.
INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS (2019)
Parametric analysis and optimization of an underfloor solar assisted heating system with phase change materials
Maria T. Plytaria et al.
THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)
Parametric analysis of a residential building with phase change material (PCM)-enhanced drywall, precooling, and variable electric rates in a hot and dry climate
Sajith Wijesuriya et al.
APPLIED ENERGY (2018)
A review of the applications of phase change materials in cooling, heating and power generation in different temperature ranges
Kun Du et al.
APPLIED ENERGY (2018)
Geocooling with integrated PCM thermal energy storage in a commercial building
P. McKenna et al.
ENERGY (2018)
Design and analysis of PCM based radiant heat exchanger for thermal management of buildings
Himanshu Garg et al.
ENERGY AND BUILDINGS (2018)
Performance study on different location of double layers SSPCM wallboard in office building
Na Zhu et al.
ENERGY AND BUILDINGS (2018)
Study on the coupling heating system of floor radiation and sunspace based on energy storage technology
Shilei Lu et al.
ENERGY AND BUILDINGS (2018)
Numerical investigation of thermal and optical performance of window units filled with nanoparticle enhanced PCM
Dong Li et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Advanced low-carbon energy measures based on thermal energy storage in buildings: A review
Jesus Lizana et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Experimental study on thermal performance improvement of building envelopes by integrating with phase change material in an intermittently heated room
Yanru Li et al.
SUSTAINABLE CITIES AND SOCIETY (2018)
Energetic investigation of solar assisted heat pump underfloor heating systems with and without phase change materials
Maria T. Plytaria et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Free cooling potential of a PCM-based heat exchanger coupled with a novel HVAC system for simultaneous heating and cooling of buildings
Alessandro Maccarini et al.
SUSTAINABLE CITIES AND SOCIETY (2018)
PCM addition inside solar water heaters: Numerical comparative approach
T. Bouhal et al.
JOURNAL OF ENERGY STORAGE (2018)
Establishment and experimental verification of TRNSYS model for PCM floor coupled with solar water heating system
Shilei Lu et al.
ENERGY AND BUILDINGS (2017)
Experimental studies on the applications of PCMs and nano-PCMs in buildings: A critical review
Alibakhsh Kasaeian et al.
ENERGY AND BUILDINGS (2017)
Influence of internal thermal mass on the indoor thermal dynamics and integration of phase change materials in furniture for building energy storage: A review
Hicham Johra et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Experimental study on thermal performance of phase change material passive and active combined using for building application in winter
Xiangfei Kong et al.
APPLIED ENERGY (2017)
Thermal performance of an office cubicle integrated with a bio-based PCM: Experimental analyses
Tor A. Vik et al.
8TH INTERNATIONAL CONFERENCE ON SUSTAINABILITY IN ENERGY AND BUILDINGS, SEB-16 (2017)
Benefits of PCM underfloor heating with PCM wallboards for space heating in winter
Paul Devaux et al.
APPLIED ENERGY (2017)
Thermal properties of beeswax/graphene phase change material as energy storage for building applications
Muhammad Amin et al.
APPLIED THERMAL ENGINEERING (2017)
Thermal performance and optimized thickness of active shape-stabilized PCM boards for side-wall cooling and under-floor heating system
Yuekuan Zhou et al.
INDOOR AND BUILT ENVIRONMENT (2016)
Thermal Performance Evaluation of Fatty Acid Ester and Paraffin Based Mixed SSPCMs Using Exfoliated Graphite Nanoplatelets (xGnP)
Hwayoung Lee et al.
APPLIED SCIENCES-BASEL (2016)
Effect of thermal conductivities of shape stabilized PCM on under-floor heating system
Wenlong Cheng et al.
APPLIED ENERGY (2015)
Thermal performance of a radiant floor heating system with different heat storage materials and heating pipes
Guobing Zhou et al.
APPLIED ENERGY (2015)
Application of PCM underfloor heating in combination with PCM wallboards for space heating using price based control system
Reza Barzin et al.
APPLIED ENERGY (2015)
Energy performance of a ventilated double skin facade with PCM under different climates
Alvaro de Gracia et al.
ENERGY AND BUILDINGS (2015)
Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard
Kaushik Biswas et al.
APPLIED ENERGY (2014)
New phase-change material components for thermal management of the light weight envelope of buildings
L. Karim et al.
ENERGY AND BUILDINGS (2014)
Experimental and numerical study on phase change material floor in solar water heating system with a new design
Kailiang Huang et al.
SOLAR ENERGY (2014)
Preparation and characterization of palmitic acid/graphene nanoplatelets composite with remarkable thermal conductivity as a novel shape-stabilized phase change material
Mohammad Mehrali et al.
APPLIED THERMAL ENGINEERING (2013)
Synthesis, characterization and thermal properties of nanoencapsulated phase change materials via sol-gel method
Sara Tahan Latibari et al.
ENERGY (2013)
Concrete roof with cylindrical holes containing PCM to reduce the heat gain
Hashem J. Alqallaf et al.
ENERGY AND BUILDINGS (2013)
Organic phase change materials and their textile applications: An overview
Nihal Sarier et al.
THERMOCHIMICA ACTA (2012)
Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel
P. Vamsi Krishna et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Experimental study of under-floor electric heating system with shape-stabilized PCM plates
KP Lin et al.
ENERGY AND BUILDINGS (2005)
Modeling and simulation of under-floor electric heating system with shape-stabilized PCM plates
KP Lin et al.
BUILDING AND ENVIRONMENT (2004)
Share Paper
