Related references
Note: Only part of the references are listed.Coupling effect of stretch-bending deformation and electric pulse treatment on phase transformation behavior and superelasticity of a Ti-50.8 at.% Ni alloy
Shan Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The Effects of Sterilization Procedures on the Cutting Efficiency of Endodontic Instruments: A Systematic Review and Network Meta-Analysis
Mario Dioguardi et al.
MATERIALS (2021)
Efficacy of Removing Thermafil and GuttaCore from Straight Root Canal Systems Using a Novel Non-Surgical Root Canal Re-Treatment System: A Micro-Computed Tomography Analysis
Vicente Faus-Llacer et al.
JOURNAL OF CLINICAL MEDICINE (2021)
Virtual Approach to the Comparative Analysis of Biomaterials Used in Endodontic Treatment
Joanna Dobrzanska et al.
PROCESSES (2021)
Evolution of thermal and mechanical properties of Nitinol wire as a function of ageing treatment conditions
Zifan Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Dentistry 4.0 Concept in the Design and Manufacturing of Prosthetic Dental Restorations
Leszek A. Dobrzanski et al.
PROCESSES (2020)
Application Solid Laser-Sintered or Machined Ti6Al4V Alloy in Manufacturing of Dental Implants and Dental Prosthetic Restorations According to Dentistry 4.0 Concept
Leszek A. Dobrzanski et al.
PROCESSES (2020)
Non-Antagonistic Contradictoriness of the Progress of Advanced Digitized Production with SARS-CoV-2 Virus Transmission in the Area of Dental Engineering
Leszek A. Dobrzanski et al.
PROCESSES (2020)
The Concept of Sustainable Development of Modern Dentistry
Leszek A. Dobrzanski et al.
PROCESSES (2020)
Approach to the Design and Manufacturing of Prosthetic Dental Restorations According to the Rules of Industry 4.0
Leszek A. Dobrzanski et al.
MATERIALS PERFORMANCE AND CHARACTERIZATION (2020)
Obstructive Sleep Apnea and Neurocognitive Dysfunction in Edentulous Patients
Soumyojeet Bagchi et al.
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2019)
Advances in Selective Laser Melting of Nitinol Shape Memory Alloy Part Production
Josiah Cherian Chekotu et al.
MATERIALS (2019)
Association between periodontal pathogens and systemic disease
Fiona Q. Bui et al.
BIOMEDICAL JOURNAL (2019)
Effect of welding parameters on functionality of dissimilar laser-welded NiTi superelastic (SE) to shape memory effect (SME) wires
Mehrshad Mehrpouya et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Internal friction of the R-phase in single crystalline Ti-50.8Ni (at.%) alloy containing controlled precipitate of Ti3Ni4
Xiao Liang et al.
SCRIPTA MATERIALIA (2019)
Torsional Resistance of ProGlider, Hyflex EDM, and One G Glide Path Instruments
Ugur Inan et al.
JOURNAL OF ENDODONTICS (2019)
Endodontic sealers based on calcium silicates: a systematic review
David Donnermeyer et al.
ODONTOLOGY (2019)
Dentists and Dental Intern's Preferences of Root Canal Treatment with Restoration Versus Extraction then Implant-Supported Crown Treatment Plan
Mohammad Alwadaani et al.
OPEN DENTISTRY JOURNAL (2019)
Formation mechanism of Ni2Ti4Ox in NITI shape memory alloy
Wei-Yu Kai et al.
MATERIALIA (2019)
In-Situ TEM Stress Induced Martensitic Transformation in Ni50.8Ti49.2 Microwires
Saeid Pourbabak et al.
SHAPE MEMORY AND SUPERELASTICITY (2019)
Why Are Carbon-Based Materials Important in Civilization Progress and Especially in the Industry 4.0 Stage of the Industrial Revolution
Leszek A. Dobrzanski et al.
MATERIALS PERFORMANCE AND CHARACTERIZATION (2019)
Applications of Laser Processing of Materials in Surface Engineering in the Industry 4.0 Stage of the Industrial Revolution
Leszek A. Dobrzanski et al.
MATERIALS PERFORMANCE AND CHARACTERIZATION (2019)
Elastocaloric effects in ultra-fine grained NiTi microwires processed by cold-drawing
Xuexi Zhang et al.
APL MATERIALS (2018)
Review on phase transformation behavior of NiTi shape memory alloys
C. Velmurugan et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Materials 4.0: Materials big data enabled materials discovery
Rajan Jose et al.
APPLIED MATERIALS TODAY (2018)
The Effect of Low Temperature Aging and the Evolution of R-Phase in Ni-Rich NiTi
Ali Shamimi et al.
SHAPE MEMORY AND SUPERELASTICITY (2018)
Nickel-titanium shape memory alloy-actuated thermal overload relay system design
S. Dilibal et al.
ELECTRICAL ENGINEERING (2017)
Multi-stage martensitic transformation in Ni-rich NiTi shape memory alloys
Xiebin Wang et al.
FUNCTIONAL MATERIALS LETTERS (2017)
The effect of employed loading mode on the mechanical cyclic stabilization of NiTi shape memory alloys
S. Dilibal et al.
INTERMETALLICS (2017)
Multiple-stage transformation behavior of Ti49.2Ni50.8 alloy with different initial microstructure processed by equal channel angular pressing
Y. X. Tong et al.
INTERMETALLICS (2017)
Machine Tool 4.0 for the new era of manufacturing
Xun Xu
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Various heat-treated nickel-titanium rotary instruments evaluated in S-shaped simulated resin canals
Yu Gu et al.
JOURNAL OF DENTAL SCIENCES (2017)
Long-term Clinical Outcome of Teeth Obturated with Resilon
Benjamin J. Barborka et al.
JOURNAL OF ENDODONTICS (2017)
Improved Functional Properties and Efficiencies of Nitinol Wires Under High-Performance Shape Memory Effect (HP-SME)
R. Casati et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Dual measurement self-sensing technique of NiTi actuators for use in robust control
Austin Gurley et al.
SMART MATERIALS AND STRUCTURES (2017)
Intelligent Manufacturing in the Context of Industry 4.0: A Review
Ray Y. Zhong et al.
ENGINEERING (2017)
Grain Nucleation and Growth in Deformed NiTi Shape Memory Alloys: An In Situ TEM Study
J. Burow et al.
SHAPE MEMORY AND SUPERELASTICITY (2017)
Residual Endodontic Filling Material after Post Space Preparation: A Confocal Microscopic Study
Yu-Yao Teoh et al.
MATERIALS (2017)
Activation of Alkaline Irrigation Fluids in Endodontics
Laurence J. Walsh et al.
MATERIALS (2017)
Comparison of the Percentage of Voids in the Canal Filling of a Calcium Silicate-Based Sealer and Gutta Percha Cones Using Two Obturation Techniques
Sohee Kim et al.
MATERIALS (2017)
Industry 4.0 as a Cyber-Physical System study
Pieter J. Mosterman et al.
SOFTWARE AND SYSTEMS MODELING (2016)
Structure and Properties of NiTi Shape Memory Alloy after Cold Rolling in Martensitic State
P. Swiec et al.
ACTA PHYSICA POLONICA A (2016)
Towards smart factory for industry 4.0: a self-organized multi-agent system with big data based feedback and coordination
Shiyong Wang et al.
COMPUTER NETWORKS (2016)
Properties of a novel polysiloxane-guttapercha calcium silicate-bioglass-containing root canal sealer
M. G. Gandolfi et al.
DENTAL MATERIALS (2016)
Are periodontal diseases really silent? A systematic review of their effect on quality of life
Sabrina Lill Buset et al.
JOURNAL OF CLINICAL PERIODONTOLOGY (2016)
Collaborative maintenance in flow-line manufacturing environments: An Industry 4.0 approach
Konstantinos Sipsas et al.
5TH CIRP GLOBAL WEB CONFERENCE - RESEARCH AND INNOVATION FOR FUTURE PRODUCTION (CIRPE 2016) (2016)
Noninvasive Dentistry: A Dream or Reality?
B. H. Clarkson et al.
CARIES RESEARCH (2015)
Effectiveness and feasibility of hysteroscopic sterilization techniques: a systematic review and meta-analysis
Claire F. la Chapelle et al.
FERTILITY AND STERILITY (2015)
Chewing Maintains Hippocampus-Dependent Cognitive Function
Huayue Chen et al.
INTERNATIONAL JOURNAL OF MEDICAL SCIENCES (2015)
Structural characterization and adhesion appraisal of TiN and TiCN coatings deposited by CAE-PVD technique on a new carbide composite cutting tool
A. A. Matei et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2015)
Effect of Repeated Simulated Clinical Use and Sterilization on the Cutting Efficiency and Flexibility of Hyflex CM Nickel-Titanium Rotary Files
Scott T. Seago et al.
JOURNAL OF ENDODONTICS (2015)
A statistical approach to understand the role of inclusions on the fatigue resistance of superelastic Nitinol wire and tubing
Scott W. Robertson et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Hardening behavior and phase decomposition in very Ni-rich Nitinol alloys
B. Chad Hornbuckle et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The Two-Way Association of Periodontal Infection with Systemic Disorders: An Overview
Ravinder Nagpal et al.
MEDIATORS OF INFLAMMATION (2015)
Ultralow-fatigue shape memory alloy films
Christoph Chluba et al.
SCIENCE (2015)
Systematic Review on Noninvasive Treatment of Root Caries Lesions
R. J. Wierichs et al.
JOURNAL OF DENTAL RESEARCH (2015)
Water fluoridation for the prevention of dental caries
Zipporah Iheozor-Ejiofor et al.
COCHRANE DATABASE OF SYSTEMATIC REVIEWS (2015)
Fundamental Development on Utilizing the R-phase Transformation in NiTi Shape Memory Alloys
Xiebin Wang et al.
SHAPE MEMORY AND SUPERELASTICITY (2015)
Loss of molars early in life develops behavioral lateralization and impairs hippocampus-dependent recognition memory
Masatsuna Kawahata et al.
BMC NEUROSCIENCE (2014)
Minimal intervention dentistry II: part 3. Management of non-cavitated (initial) occlusal caries lesions - non-invasive approaches through remineralisation and therapeutic sealants
C. Holmgren et al.
BRITISH DENTAL JOURNAL (2014)
Transition temperature range of thermally activated nickel-titanium archwires
Tatiana Sobottka Spini et al.
JOURNAL OF APPLIED ORAL SCIENCE (2014)
Quality of obturation achieved by an endodontic core-carrier system with crosslinked gutta-percha carrier in single-rooted canals
Guo-Hua Li et al.
JOURNAL OF DENTISTRY (2014)
Influence of microstructural purity on the bending fatigue behavior of VAR-melted superelastic Nitinol
Maximilien Launey et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)
Learning deficits and suppression of the cell proliferation in the hippocampal dentate gyrus of offspring are attenuated by maternal chewing during prenatal stress
Mika Onishi et al.
NEUROSCIENCE LETTERS (2014)
R-phase transition and related mechanical properties controlled by low-temperature aging treatment in a Ti-50.8 at.% Ni thin wire
Xiebin Wang et al.
SCRIPTA MATERIALIA (2014)
Prospects of oral disease control in the future - an opinion
Philip D. Marsh et al.
JOURNAL OF ORAL MICROBIOLOGY (2014)
Results of Technology Foresight in the Surface Engineering Area
Anna Danuta Dobrzanska-Danikiewicz et al.
ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING (2014)
Impurity levels and fatigue lives of pseudoelastic NiTi shape memory alloys
M. Rahim et al.
ACTA MATERIALIA (2013)
Effects of chewing on cognitive processing speed
Yoshiyuki Hirano et al.
BRAIN AND COGNITION (2013)
International Caries Detection and Assessment System (ICDAS) and its International Caries Classification and Management System (ICCMS) - methods for staging of the caries process and enabling dentists to manage caries
N. B. Pitts et al.
COMMUNITY DENTISTRY AND ORAL EPIDEMIOLOGY (2013)
Caries management pathways preserve dental tissues and promote oral health
Amid I. Ismail et al.
COMMUNITY DENTISTRY AND ORAL EPIDEMIOLOGY (2013)
Effect of alloy composition on the B2-R transformation in rapidly solidified Ti-Ni alloys
Hyo-jung Moon et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Effect of R-phase Heat Treatment on Torsional Resistance and Cyclic Fatigue Fracture
Jung-Hong Ha et al.
JOURNAL OF ENDODONTICS (2013)
Shape memory behavior of high strength Ni54Ti46 alloys
H. E. Karaca et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of grain size on aging microstructure as reflected in the transformation behavior of a low-temperature aged Ti-50.8 at.% Ni alloy
Xiebin Wang et al.
SCRIPTA MATERIALIA (2013)
Effect of autoclaving on the surfaces of TiN -coated and conventional nickel-titanium rotary instruments
G. Spagnuolo et al.
INTERNATIONAL ENDODONTIC JOURNAL (2012)
Gum Containing Calcium Fluoride Reinforces Enamel Subsurface Lesions in situ
Y. Kitasako et al.
JOURNAL OF DENTAL RESEARCH (2012)
Experimental Evaluation on the Influence of Autoclave Sterilization on the Cyclic Fatigue of New Nickel-Titanium Rotary Instruments
Gianluca Plotino et al.
JOURNAL OF ENDODONTICS (2012)
Nitinol Fatigue Life for Variable Strain Amplitude Fatigue
Z. Lin et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Chewing Ability and Tooth Loss: Association with Cognitive Impairment in an Elderly Population Study
Duangjai Lexomboon et al.
JOURNAL OF THE AMERICAN GERIATRICS SOCIETY (2012)
Effects of thermal cycling on microstructure and properties in Nitinol
A. R. Pelton et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Foresight of material surface engineering as a tool building a knowledge-based economy
A. D. Dobrzanska-Danikiewicz
THERMEC 2011, PTS 1-4 (2012)
Quantitative three-dimensional analysis of Ni4Ti3 precipitate morphology and distribution in polycrystalline Ni-Ti
S. Cao et al.
ACTA MATERIALIA (2011)
Active versus passive microleakage of Resilon/Epiphany and gutta-percha/AH Plus
Lumnije Kqiku et al.
AUSTRALIAN ENDODONTIC JOURNAL (2011)
The effect of aging on the B2-R transformation behaviors in Ti-51at%Ni alloy
Deqing Xue et al.
INTERMETALLICS (2011)
Effects of CPP-ACP with sodium fluoride on inhibition of bovine enamel demineralization: A quantitative assessment using micro-computed tomography
H. Hamba et al.
JOURNAL OF DENTISTRY (2011)
Cutting Efficiency of Twisted versus Machined Nickel-Titanium Endodontic Files
Dalia Mukhtar Fayyad et al.
JOURNAL OF ENDODONTICS (2011)
Nitinol Fatigue Investigation on Stent-Finish Specimens Using Tension-Tension Method
Z. Lin et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)
A comparative evaluation of 3 root canal filling systems
Ruchika Roongta Nawal et al.
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTOLOGY (2011)
Cytotoxicity evaluation of Gutta Flow and Endo Sequence BC sealers
Keivan Zoufan et al.
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTOLOGY (2011)
Filling the root canal system with warm gutta-percha: principles materials and techniques
Raniero Barattolo et al.
GIORNALE ITALIANO DI ENDODONZIA (2011)
Long-term sealing ability of resin-based root canal fillings
J. Santos et al.
INTERNATIONAL ENDODONTIC JOURNAL (2010)
Comparison of remineralization effect of three topical fluoride regimens on enamel initial carious lesions
Y. E. Lee et al.
JOURNAL OF DENTISTRY (2010)
Putative Stem Cells in Human Dental Pulp with Irreversible Pulpitis: An Exploratory Study
Zhengyan Wang et al.
JOURNAL OF ENDODONTICS (2010)
Expression of Extracellular Matrix Proteins in Human Dental Pulp Stem Cells Depends on the Donor Tooth Conditions
Sueli Patricia Harumi Miyagi et al.
JOURNAL OF ENDODONTICS (2010)
Number of Teeth as a Predictor of Cardiovascular Mortality in a Cohort of 7,674 Subjects Followed for 12 Years
Anders Holmlund et al.
JOURNAL OF PERIODONTOLOGY (2010)
MEMORY SYSTEMS - OPINION A model for memory systems based on processing modes rather than consciousness
Katharina Henke
NATURE REVIEWS NEUROSCIENCE (2010)
Comparative analysis of leakage in root canal fillings performed with gutta-percha and Resilon cones with AH Plus and Epiphany sealers
Vinicio Hidemitsu Goto Hirai et al.
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTOLOGY (2010)
The effects of heat treatment on the recovery stresses of shape memory alloys
H. Sadiq et al.
SMART MATERIALS & STRUCTURES (2010)
Microleakage of root canal fillings with GuttaFlow ® and ResilonTM compared with lateral condensation
Lumnije Kqiku et al.
WIENER MEDIZINISCHE WOCHENSCHRIFT (2010)
Cross-sectional study of endodontic treatment in an Australian population
Katherine Da Silva et al.
AUSTRALIAN ENDODONTIC JOURNAL (2009)
Long-term sealing ability of Resilon apical root-end fillings
M. A. A. De Bruyne et al.
INTERNATIONAL ENDODONTIC JOURNAL (2009)
A Comparative Study on the Frequency, Location, and Direction of Accessory Canals Filled With the Hydraulic Vertical Condensation and Continuous Wave of Condensation Techniques
Fabiola Ormiga Galvao Barbosa et al.
JOURNAL OF ENDODONTICS (2009)
Apical Leakage of Three Resin-Based Endodontic Sealers after 810-nm-Diode Laser Irradiation
Cacio Moura-Netto et al.
PHOTOMEDICINE AND LASER SURGERY (2009)
The history of dentistry and medicine relationship: could the mouth finally return to the body?
C. L. Z. Vieira et al.
ORAL DISEASES (2009)
Oral bacterial cultures in nontraumatic brain abscesses: results of a first-line study
Andreas Albert Mueller et al.
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTOLOGY (2009)
Edentulism and Comorbid Factors
David A. Felton
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2009)
Caries Ecology Revisited: Microbial Dynamics and the Caries Process
N. Takahashi et al.
CARIES RESEARCH (2008)
Glucose reactivity with filling materials as a limitation for using the glucose leakage model
H. Shemesh et al.
INTERNATIONAL ENDODONTIC JOURNAL (2008)
Microbial leakage of gutta-percha and Resilon (TM) root canal filling material: A comparative study using a new homogeneous assay for sequence detection
Damum Pasqualini et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2008)
Bacteria of dental caries in primary and permanent teeth in children and young adults
Jorn A. Aas et al.
JOURNAL OF CLINICAL MICROBIOLOGY (2008)
In vitro comparison of coronal microleakage between resilon alone and gutta-percha with a glass-ionomer intraorifice barrier using a fluid filtration model
Ryan M. Jack et al.
JOURNAL OF ENDODONTICS (2008)
Comparison of regrowth of Enterococcus faecalis in dentinal tubules after sealing with gutta-percha or Resilon
Su-Jung Shin et al.
JOURNAL OF ENDODONTICS (2008)
Reduced long-term sealing ability of adhesive root fillings after water-storage stress
Gustavo De-Deus et al.
JOURNAL OF ENDODONTICS (2008)
The effect of ageing treatment on shape-setting and superelasticity of a nitinol stent
Xiaopeng Liu et al.
MATERIALS CHARACTERIZATION (2008)
Effect of microstructure on the fatigue of hot-rolled and cold-drawn NiTi shape memory alloys
Ken Gall et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Nitinol surface finishing by magnetoelectropolishing
R. Rokicki et al.
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING (2008)
Diabetes mellitus and odontogenic infectionsan exaggerated risk?
Mohan Alexander et al.
ORAL AND MAXILLOFACIAL SURGERY-HEIDELBERG (2008)
Severe versus local odontogenic bacterial infections: Comparison of microbial isolates
B. Al-Nawas et al.
EUROPEAN SURGICAL RESEARCH (2008)
Bacterial penetration along different root canal filling materials in the presence or absence of smear layer
I. M. Saleh et al.
INTERNATIONAL ENDODONTIC JOURNAL (2008)
An in vitro comparison of microleakage between Resilon and gutta-percha with a fluid filtration model
Jaron R. Wedding et al.
JOURNAL OF ENDODONTICS (2007)
Oral biofilms, periodontitis, and pulmonary infections
S. Paju et al.
ORAL DISEASES (2007)
Tooth loss, dementia and neuropathology in the Nun study
Pamela Sparks Stein et al.
JOURNAL OF THE AMERICAN DENTAL ASSOCIATION (2007)
Fracture resistance of electropolished rotary nickel-titanium endodontic instruments
Margot E. Anderson et al.
JOURNAL OF ENDODONTICS (2007)
A Confocal laser scanning microscope investigation of the epiphany obturation system
Saman R. Gharib et al.
JOURNAL OF ENDODONTICS (2007)
The International Caries Detection and Assessment System (ICDAS): an integrated system for measuring dental caries
A. I. Ismail et al.
COMMUNITY DENTISTRY AND ORAL EPIDEMIOLOGY (2007)
Comparison of apical leakage between canals filled with gutta-percha/AH-Plus and the Resilon/Epiphany System, when submitted to two filling techniques
Denusa Moreira Verissimo et al.
JOURNAL OF ENDODONTICS (2007)
Sealing ability of new adhesive root canal filling materials measured by new dye penetration method
Hitomi Ishimura et al.
DENTAL MATERIALS JOURNAL (2007)
An epidemiologic study of tooth retention after nonsurgical endodontic treatment in a large population in Taiwan
Shih-Chung Chen et al.
JOURNAL OF ENDODONTICS (2007)
Cross-sectional evaluation of the periapical status and quality of root canal treatment in a selected population of urban Turkish adults
H. Sunay et al.
INTERNATIONAL ENDODONTIC JOURNAL (2007)
An overview of the dental pulp: its functions and responses to injury
C. Yu et al.
AUSTRALIAN DENTAL JOURNAL (2007)
Passive ultrasonic irrigation of the root canal: a review of the literature
L. W. M. van der Sluis et al.
INTERNATIONAL ENDODONTIC JOURNAL (2007)
Apical sealing ability of Resilon/Epiphany versus gutta-percha/AH Plus: immediate and 16-months leakage
F. Paque et al.
INTERNATIONAL ENDODONTIC JOURNAL (2007)
Precipitation kinetics of Ti3Ni4 in polycrystalline Ni-rich TiNi alloys and its relation to abnormal multi-stage transformation behavior
G. Fan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Quantitative phase analysis in microstructures which display multiple step martensitic transformations in Ni-rich NiTi shape memory alloys
Jafar Khalil-Allafi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Leakage along apical root fillings with and without smear layer using two different leakage models:: a two-month longitudinal ex vivo study
H. Shemesh et al.
INTERNATIONAL ENDODONTIC JOURNAL (2006)
Evaluation of microleakage of roots filled with different techniques with a computerized fluid filtration technique
Burak Sagsen et al.
JOURNAL OF ENDODONTICS (2006)
An in vitro evaluation of the apical sealing ability of a new resin-based root canal obturation system
Emel Olga Onay et al.
JOURNAL OF ENDODONTICS (2006)
Assessment of the sealing ability of a new root canal obturation material
Umut Tunga et al.
JOURNAL OF ENDODONTICS (2006)
A fluid filtration comparison of gutta-percha versus Resilon, a new soft resin endodontic obturation system
Ryan K. Stratton et al.
JOURNAL OF ENDODONTICS (2006)
R-phase transformation phenomena in thermomechanically loaded NiTi polycrystals
P Sittner et al.
MECHANICS OF MATERIALS (2006)
A laboratory analysis of gutta-percha-filled area obtained using Thermafil, System B and lateral condensation
G De-Deus et al.
INTERNATIONAL ENDODONTIC JOURNAL (2006)
Quantitative evaluation of the amount of apically extruded debris using 3 different rotary instrumentation systems
J Tanalp et al.
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTOLOGY (2006)
Reasons for tooth extraction in Kuwait
Khalaf F. Al-Shammari et al.
MEDICAL PRINCIPLES AND PRACTICE (2006)
Spreader penetration during lateral compaction of Resilon and gutta-percha
BA Nielsen et al.
JOURNAL OF ENDODONTICS (2006)
Tooth loss is independently associated with the risk of acquired aortic valve sclerosis
H Völzke et al.
AMERICAN HEART JOURNAL (2005)
Nanostructured TiNi-based shape memory alloys processed by severe plastic deformation
VG Pushin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Radiographic evaluation of periapical status and prevalence of endodontic treatment in an adult Japanese population
M Tsuneishi et al.
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTOLOGY (2005)
Comparative study of six rotary nickel-titanium systems and hand instrumentation for root canal preparation
A Guelzow et al.
INTERNATIONAL ENDODONTIC JOURNAL (2005)
Physical metallurgy of Ti-Ni-based shape memory alloys
K Otsuka et al.
PROGRESS IN MATERIALS SCIENCE (2005)
Tooth loss is associated with increased risk of total death and death from upper gastrointestinal cancer, heart disease, and stroke in a Chinese population-based cohort
CC Abnet et al.
INTERNATIONAL JOURNAL OF EPIDEMIOLOGY (2005)
Quantitative determination of strain fields around Ni4Ti3 precipitates in NiTi
W Tirry et al.
ACTA MATERIALIA (2005)
Periapical inflammation after coronal microbial inoculation of dog roots filled with gutta-percha or resilon
G Shipper et al.
JOURNAL OF ENDODONTICS (2005)
Periapical status and quality of endodontic treatment in an adult Irish population
JJ Loftus et al.
INTERNATIONAL ENDODONTIC JOURNAL (2005)
Frequency and distribution of root filled teeth and apical periodontitis in a Greek population
MK Georgopoulou et al.
INTERNATIONAL ENDODONTIC JOURNAL (2005)
In vitro microbial leakage of endodontically treated teeth using new and standard obturation techniques
G Shipper et al.
JOURNAL OF ENDODONTICS (2004)
Surface debris of canal walls after post space preparation in endodontically treated teeth: A scanning electron microscopic study
C Serafino et al.
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTOLOGY (2004)
Prevalence of apical periodontitis and frequency of root-filled teeth in an adult Spanish population
A Jiménez-Pinzón et al.
INTERNATIONAL ENDODONTIC JOURNAL (2004)
Ageing-induced two-stage R-phase transformation in Ti-50.9at.%Ni
JI Kim et al.
ACTA MATERIALIA (2004)
Endodontics: Part 1 - The modern concept of root canal treatment
P Carrotte
BRITISH DENTAL JOURNAL (2004)
Origin of abnormal multi-stage martensitic transformation behavior in aged Ni-rich Ti-Ni shape memory alloys
GL Fan et al.
ACTA MATERIALIA (2004)
On the influence of heterogeneous precipitation on martensitic transformations in a Ni-rich NiTi shape memory alloy
J Khalil-Allafi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Endodontic treatment outcomes in a large patient population in the USA: An epidemiological study
R Salehrabi et al.
JOURNAL OF ENDODONTICS (2004)
Fracture resistance of roots endodontically treated with a new resin filling material
FB Teixeira et al.
JOURNAL OF THE AMERICAN DENTAL ASSOCIATION (2004)
An evaluation of microbial leakage in roots filled with a thermoplastic synthetic polymer-based root canal filling material (Resilon)
G Shipper et al.
JOURNAL OF ENDODONTICS (2004)
Anatomy of the pulp-chamber floor
P Krasner et al.
JOURNAL OF ENDODONTICS (2004)
The physical metallurgy of Nitinol for medical applications
AR Pelton et al.
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2003)
Retention in plaque and remineralization of enamel lesions by various forms of calcium in a mouthrinse or sugar-free chewing gum
EC Reynolds et al.
JOURNAL OF DENTAL RESEARCH (2003)
Transformation behaviour with thermal cycling in NiTi alloys
H Matsumoto
JOURNAL OF ALLOYS AND COMPOUNDS (2003)
Clinical and radiographic evaluation of root-canal obturation with obtura II
N Tani-Ishii et al.
JOURNAL OF ENDODONTICS (2003)
A comparative study of lateral condensation, heat-softened gutta-percha, and a modified master cone heat-softened backfilling technique
D Da Silva et al.
INTERNATIONAL ENDODONTIC JOURNAL (2002)
Effect of sterilization on the cutting efficiency of PVD-coated nickel-titanium endodontic instruments
E Schäfer
INTERNATIONAL ENDODONTIC JOURNAL (2002)
Effect of thermal cycling on R-phase stability in a NiTi shape memory alloy
J Uchil et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
The mechanism of multistage martensitic transformations in aged Ni-rich NiTi shape memory alloys
JK Allafi et al.
ACTA MATERIALIA (2002)
Comparison of different gutta-percha root filling techniques: Thermafil, Quick-Fill, System B, and lateral condensation
N Gencoglu et al.
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTICS (2002)
Effects of sodium hypochlorite and RC-Prep on bond strengths of resin cement to endodontic surfaces
MD Morris et al.
JOURNAL OF ENDODONTICS (2001)
Epidemiological evaluation of the outcomes of nonsurgical root canal treatment in a large cohort of insured dental patients
MP Lazarski et al.
JOURNAL OF ENDODONTICS (2001)
Alpha- and beta-forms of gutta-percha in products for root canal filling
EC Combe et al.
INTERNATIONAL ENDODONTIC JOURNAL (2001)
Effect of annealing on the transformation behavior and superelasticity of NiTi shape memory alloy
X Huang et al.
SCRIPTA MATERIALIA (2001)
Relationship between tooth loss and electrocardiographic abnormalities in octogenarians
Y Takata et al.
JOURNAL OF DENTAL RESEARCH (2001)
An in vitro evaluation of the antimicrobial efficacy of irrigants on biofilms of root canal isolates
DA Spratt et al.
INTERNATIONAL ENDODONTIC JOURNAL (2001)
Effectiveness of different obturation techniques in the filling of simulated lateral canals
F Goldberg et al.
JOURNAL OF ENDODONTICS (2001)
Frequency and distribution of endodontically treated teeth and apical periodontitis in an urban Danish population
LL Kirkevang et al.
INTERNATIONAL ENDODONTIC JOURNAL (2001)
A primary observation on the preparation and obturation of oval canals
MK Wu et al.
INTERNATIONAL ENDODONTIC JOURNAL (2001)
Effect of sodium hypochlorite on mechanical propel-ties of dentine and tooth surface strain
TPC Sim et al.
INTERNATIONAL ENDODONTIC JOURNAL (2001)
Bacterial leakage in coronally unsealed root canals obturated with 3 different techniques
JF Siqueira et al.
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTICS (2000)
Reasons for tooth extraction in a Brazilian population
AF Caldas et al.
INTERNATIONAL DENTAL JOURNAL (2000)
Chemomechanical reduction of the bacterial population in the root canal after instrumentation and irrigation with 1%, 2.5%, and 5.25% sodium hypochlorite
JF Siqueira et al.
JOURNAL OF ENDODONTICS (2000)
Lasers in endodontics: a review
Y Kimura et al.
INTERNATIONAL ENDODONTIC JOURNAL (2000)
Complications during root canal irrigation -: literature review and case reports
M Hülsmann et al.
INTERNATIONAL ENDODONTIC JOURNAL (2000)
Periapical health related to the quality of root canal treatment in a Belgian population
RJG De Moor et al.
INTERNATIONAL ENDODONTIC JOURNAL (2000)
Reasons for tooth extraction in Scotland
IG Chestnutt et al.
JOURNAL OF DENTISTRY (2000)
Torsional properties of stainless-steel and nickel-titanium files after multiple autoclave sterilizations
BR Hilt et al.
JOURNAL OF ENDODONTICS (2000)