4.6 Article

Influence of Interfacial Force Models and Population Balance Models on the kLa Value in Stirred Bioreactors

Related references

Note: Only part of the references are listed.
Article Engineering, Chemical

Scale-up of aerated bioreactors: CFD validation and application to the enzyme production by Trichoderma reesei

Vincenzo Cappello et al.

Summary: Applying Computational Fluid Dynamics to simulate enzyme production by filamentous fungi involves validating various models and investigating the impact of scale-up on productivity. Validation of the model reveals complex behaviors, such as substrate heterogeneities, yield loss, and non-obvious interactions between mixing and oxygen transfer limitations.

CHEMICAL ENGINEERING SCIENCE (2021)

Article Engineering, Environmental

CFD based mass transfer modeling of a single use bioreactor for production of monoclonal antibody biotherapeutics

Somesh Mishra et al.

Summary: Multiple models and methods were used in this study to simulate mAb production in a single use bioreactor, showing that bubble size distribution becomes more dispersed with increasing agitation speed. The predicted mass transfer coefficient values were within a small error range of the experimental data.

CHEMICAL ENGINEERING JOURNAL (2021)

Review Engineering, Chemical

Oxygen Mass Transfer in Biopharmaceutical Processes: Numerical and Experimental Approaches

Stefan Seidel et al.

Summary: This paper discusses the importance of oxygen supply in aerobic bioprocesses, presents methods for calculating the k(L)a coefficient, and introduces experimental techniques for determining this value.

CHEMIE INGENIEUR TECHNIK (2021)

Review Biotechnology & Applied Microbiology

An overview of drive systems and sealing types in stirred bioreactors used in biotechnological processes

Cedric Schirmer et al.

Summary: This review provides an overview of the most common agitation and seal types implemented in stirred bioreactor systems, focusing on their advantages and disadvantages, and explaining their possible fields of application. Special attention is paid to the development of magnetically driven agitators, which are widely used and becoming more important in both reusable and single-use systems.

APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2021)

Article Engineering, Chemical

Application of extended quadrature method of moments for simulation of bubbly flow and mass transfer in gas-liquid stirred tanks

Ehsan Askari et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2019)

Article Engineering, Chemical

Estimation of kLa Values in Bench-Scale Stirred Tank Reactors with Self-Inducing Impeller by Multiphase CFD Simulations

Vania Santos-Moreau et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2019)

Review Chemistry, Physical

A review of bubble break-up

Pengbo Chu et al.

ADVANCES IN COLLOID AND INTERFACE SCIENCE (2019)

Review Engineering, Chemical

Quadrature-based moment methods for the population balance equation: An algorithm review

Dongyue Li et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2019)

Article Mechanics

A fully analytical model for virtual mass force in mixture flows

Shiva P. Pudasaini

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2019)

Article Energy & Fuels

Development of numerical Eulerian-Eulerian models for simulating multiphase pumps

Jun-Won Suh et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)

Article Engineering, Chemical

Experimentally Validated CFD Model for Gas-Liquid Flow in a Round-Bottom Stirred Tank Equipped with Rushton Turbine

Dmitry Vladimirovich Gradov et al.

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2017)

Article Engineering, Chemical

Experimentally Validated CFD Model for Gas-Liquid Flow in a Round-Bottom Stirred Tank Equipped with Rushton Turbine

Dmitry Vladimirovich Gradov et al.

INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING (2017)

Article Engineering, Chemical

CFD-PBM approach with modified drag model for the gas-liquid flow in a bubble column

Xiao-Fei Liang et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2016)

Article Computer Science, Interdisciplinary Applications

Solution of population balance equations in applications with fine particles: Mathematical modeling and numerical schemes

T. T. Nguyen et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2016)

Review Chemistry, Physical

The Foundation of the Population Balance Equation: A Review

Jannike Solsvik et al.

JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2015)

Review Biotechnology & Applied Microbiology

Computational fluid dynamics as a modern tool for engineering characterization of bioreactors

Soeren Werner et al.

PHARMACEUTICAL BIOPROCESSING (2014)

Article Engineering, Chemical

CFD analysis of inter-phase forces in a bubble stirred vessel

Yanhong Zhang et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2013)

Article Materials Science, Multidisciplinary

Numerical Simulation of Gas and Liquid Two-Phase Flow in Gas-Stirred Systems Based on Euler-Euler Approach

Wentao Lou et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2013)

Article Engineering, Environmental

Oxygen mass transfer in a stirred tank bioreactor using different impeller configurations for environmental purposes

Ali Karimi et al.

IRANIAN JOURNAL OF ENVIRONMENTAL HEALTH SCIENCE & ENGINEERING (2013)

Article Biochemistry & Molecular Biology

The rate of oxygen utilization by cells

Brett A. Wagner et al.

FREE RADICAL BIOLOGY AND MEDICINE (2011)

Review Biotechnology & Applied Microbiology

Oxygen uptake rate in microbial processes: An overview

Felix Garcia-Ochoa et al.

BIOCHEMICAL ENGINEERING JOURNAL (2010)

Article Engineering, Chemical

Gas-Liquid Mass Transfer Coefficient in Stirred Tank Reactors

Archis A. Yawalkar et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2010)

Review Engineering, Chemical

A literature review on mechanisms and models for the coalescence process of fluid particles

Yixiang Liao et al.

CHEMICAL ENGINEERING SCIENCE (2010)

Review Biotechnology & Applied Microbiology

Bioreactor scale-up and oxygen transfer rate in microbial processes: An overview

Felix Garcia-Ochoa et al.

BIOTECHNOLOGY ADVANCES (2009)

Review Engineering, Chemical

A literature review of theoretical models for drop and bubble breakup in turbulent dispersions

Yixiang Liao et al.

CHEMICAL ENGINEERING SCIENCE (2009)

Review Biochemistry & Molecular Biology

Using computational fluid dynamics to characterize and improve bioreactor performance

William J. Kelly

BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY (2008)

Article Engineering, Environmental

CFD simulation of bubble column - An analysis of interphase forces and turbulence models

Mandar V. Tabib et al.

CHEMICAL ENGINEERING JOURNAL (2008)

Article Engineering, Chemical

Use of models for lift, wall and turbulent dispersion forces acting on bubbles for poly-disperse flows

D. Lucas et al.

CHEMICAL ENGINEERING SCIENCE (2007)

Article Engineering, Chemical

Modelling local bubble size distributions in agitated vessels

Marko Laakkonen et al.

CHEMICAL ENGINEERING SCIENCE (2007)

Article Biotechnology & Applied Microbiology

Fermentation characteristics of L-tryptophan production by thermoacidophilic Bacillus acidocaldarius in a defined medium

Pinar Kocabas et al.

ENZYME AND MICROBIAL TECHNOLOGY (2006)

Article Biotechnology & Applied Microbiology

Application of oxygen uptake rate-amino acids associated mode in controlled-fed perfusion culture

Q Feng et al.

JOURNAL OF BIOTECHNOLOGY (2006)

Article Biotechnology & Applied Microbiology

Reactor engineering in large scale animal cell culture

Alvin W. Nienow

CYTOTECHNOLOGY (2006)

Article Engineering, Chemical

On the comparison between population balance models for CFD simulation of bubble columns

J Sanyal et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)

Review Engineering, Aerospace

Mesh generation: Art or science?

TJ Baker

PROGRESS IN AEROSPACE SCIENCES (2005)

Article Biotechnology & Applied Microbiology

Oxygen consumption profiles of Sf-9 insect cells and their culture at low temperature to circumvent oxygen starvation

T Gotoh et al.

BIOCHEMICAL ENGINEERING JOURNAL (2004)

Article Biotechnology & Applied Microbiology

Effect of oxygen limitation and medium composition on Escherichia coli fermentation in shake-flask cultures

M Losen et al.

BIOTECHNOLOGY PROGRESS (2004)

Article Engineering, Chemical

Oxygen transfer effects on recombinant benzaldehyde lyase production

P Çalik et al.

CHEMICAL ENGINEERING SCIENCE (2004)

Article Engineering, Chemical

Theoretical prediction of gas-liquid mass transfer coefficient, specific area and hold-up in sparged stirred tanks

F Garcia-Ochoa et al.

CHEMICAL ENGINEERING SCIENCE (2004)

Article Mathematics, Interdisciplinary Applications

A note on preliminary tests of equality of variances

DW Zimmerman

BRITISH JOURNAL OF MATHEMATICAL & STATISTICAL PSYCHOLOGY (2004)

Article Engineering, Chemical

A novel theoretical breakup kernel function for bubbles/droplets in a turbulent flow

TF Wang et al.

CHEMICAL ENGINEERING SCIENCE (2003)

Article Engineering, Chemical

Bubble-size distributions and flow fields in bubble columns

F Lehr et al.

AICHE JOURNAL (2002)

Article Mechanics

Terminal velocity of single bubbles in surface tension force dominant regime

A Tomiyama et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2002)

Article Mechanics

Modelling hydrodynamics and turbulence in a bubble column using the Euler-Lagrange procedure

S Laín et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2002)

Article Engineering, Chemical

Transverse migration of single bubbles in simple shear flows

A Tomiyama et al.

CHEMICAL ENGINEERING SCIENCE (2002)

Article Engineering, Chemical

Population balance modeling of aerated stirred vessels based on CFD

BCH Venneker et al.

AICHE JOURNAL (2002)

Article Engineering, Chemical

Large eddy simulation of the gas-liquid flow in a square cross-sectioned bubble column

NG Deen et al.

CHEMICAL ENGINEERING SCIENCE (2001)

Article Biotechnology & Applied Microbiology

Oxygen transfer and uptake rates during xanthan gum production

F García-Ochoa et al.

ENZYME AND MICROBIAL TECHNOLOGY (2000)