Journal
COATINGS
Volume 11, Issue 8, Pages -Publisher
MDPI
DOI: 10.3390/coatings11080986
Keywords
magnesium; corrosion; cold pressing; hot pressing; powder metallurgy
Categories
Funding
- Specific University Research at FCH BUT
- FCH-S21-7553
- Ministry of Education, Youth and Sports of the Czech Republic
Ask authors/readers for more resources
Pure Mg samples were prepared by powder metallurgy using cold and hot compacting methods, with hot compacted samples showing longer corrosion resistance and uniform corrosion behavior compared to cold compacted samples. The difference in corrosion behavior was mainly related to the different binding mechanisms during compaction.
Pure Mg samples were prepared by powder metallurgy using the cold and hot compacting methods. Cold compacted pure Mg (500 MPa/RT) was characterized by 5% porosity and the mechanical bonding of powder particles. Hot compacted samples (100 MPa/400 degrees C and 500 MPa/400 degrees C) exhibited porosity below 0.5%, and diffusion bonding combined with mechanical bonding played a role in material compaction. The prepared pure Mg samples and wrought pure Mg were subjected to corrosion tests using electrochemical impedance spectroscopy. Similar material corrosion behavior was observed for the samples compacted at 500 MPa/RT and 100 MPa/400 degrees C; however, hot compacted samples processed at 500 MPa/400 degrees C exhibited longer corrosion resistance in 0.9% NaCl solution. The difference in corrosion behavior was mainly related to the different binding mechanisms of the powder particles. Cold compacted samples were characterized by a more pronounced corrosion attack and the creation of a porous layer of corrosion products. Hot compacted samples prepared at 500 MPa/400 degrees C were characterized by uniform corrosion and the absence of a layer of corrosion products on the specimen surface. Powder-based cold compacted samples exhibited lower corrosion resistance compared to the wrought pure Mg, while the corrosion behavior of the hot compacted samples prepared at 500 MPa/400 degrees C was similar to that of wrought material.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available