Related references
Note: Only part of the references are listed.A review of microstructural changes occurring during FSW in aluminium alloys and their modelling
Dimitri Jacquin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Determination of best tool geometry for friction stir welding of AA 6061-T6 using hybrid PCA-TOPSIS optimization method
Abhijit Banik et al.
MEASUREMENT (2021)
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
A. Heidarzadeh et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Effect of tool geometry in dissimilar Al-Steel Friction Stir Welding
Pankaj Kaushik et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Modeling of material flow in dissimilar friction stir lap welding of aluminum and brass using coupled Eulerian and Lagrangian method
Mostafa Akbari et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Enhancements on Dissimilar Friction Stir Welding Between AZ31 and SPHC Mild Steel With Al-Mg as Powder Additives
Mohd Ridha bin Muhamad et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2021)
Corrosion Resistance of Aluminum-Copper Alloys with Different Grain Structures
Alejandra S. Roman et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Recent progress on control strategies for inherent issues in friction stir welding
Xiangchen Meng et al.
PROGRESS IN MATERIALS SCIENCE (2021)
Investigation of the microstructure, mechanical properties and fracture mechanisms of dissimilar friction stir welded aluminium/titanium joints
Taher A. Shehabeldeen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Enhancing metallurgical and mechanical properties of friction stir butt welded joints of Al-Cu via cold sprayed Ni interlayer
Wentao Hou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Impact of shoulder morphology on macrostructural forming and the texture development during probeless friction stir spot welding
Q. Chu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Homogeneously Dispersed Graphene Nanoplatelets as Long-Term Corrosion Inhibitors for Aluminum Matrix Composites
Yuming Xie et al.
ACS APPLIED MATERIALS & INTERFACES (2021)
Challenges, process requisites/inputs, mechanics and weld performance of dissimilar micro-friction stir welding (dissimilar μFSW): A comprehensive review
Mayank Verma et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Insight into ultra-refined grains of aluminum matrix composites via deformation-driven metallurgy
Yuming Xie et al.
COMPOSITES COMMUNICATIONS (2021)
Welding and processing of metallic materials by using friction stir technique: A review
Mostafa M. El-Sayed et al.
JOURNAL OF ADVANCED JOINING PROCESSES (2021)
Preparation of bimetallic nano-composite by dissimilar friction stir welding of copper to aluminum alloy
Farhad Bakhtiari Argesi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2021)
A Study on Electrical and Electrochemical Characteristics of Friction Stir Welded Lithium-Ion Battery Tabs for Electric Vehicles
Omkar Mypati et al.
JOURNAL OF ELECTRONIC MATERIALS (2020)
Evaluation of capabilities of ultrasonic vibration on the surface, electrical and mechanical behaviours of aluminium to copper dissimilar friction stir welds
Najib A. Muhammad et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Recent research progress in solid state friction-stir welding of aluminium-magnesium alloys: a critical review
Virendra Pratap Singh et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Development of high strength and high electrical conductivity Cu/Gr composites through friction stir processing
R. Bheekya Naik et al.
MATERIALS LETTERS (2020)
Effects of tool shoulder size on the thermal process and material flow behaviors in ultrasonic vibration enhanced friction stir welding
L. Shi et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Machine learning based hierarchy of causative variables for tool failure in friction stir welding
Y. Du et al.
ACTA MATERIALIA (2020)
Microstructure and Conductivity of the Al-Cu Joint Processed by Friction Stir Welding
Yanni Wei et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2020)
Effect of Sn interlayer on mechanical properties and microstructure in Al/Mg friction stir lap welding with different rotational speeds
Bo Zheng et al.
MATERIALS RESEARCH EXPRESS (2020)
The role of tool offset on the microstructure and mechanical properties of Al/Cu friction stir welded joints
Wentao Hou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Weldability, microstructure, and residual stress in Al/Cu and Cu/Al friction stir spot weld joints with Zn interlayer
Adel Boucherit et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Effects of Al-Ni powder addition on dissimilar friction stir welding between AA7075-T6 and 304 LAuswirkungen der Al-Ni-Pulverzugabe beim artfremden Ruhrreibschweissen zwischen AA7075-T6 und 304 L
M. R. Muhamad et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2020)
Structure-property characteristics of Al-Cu joint formed by high-rotation-speed friction stir lap welding without tool penetration into lower Cu sheet
Qilong Guan et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Analysis of material distribution in dissimilar friction stir welded joints of Al 1050 and copper
Nikhil Gotawala et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Friction stir welding of Ti-6Al-4V alloy: Friction tool, microstructure, and mechanical properties
Junping Li et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Effect of sintering techniques on microstructural, mechanical and tribological properties of Al-SiC composites
Mohd Bilal Naim Shaikh et al.
SURFACES AND INTERFACES (2020)
Microstructural characterization and mechanical properties of micro friction stir welded dissimilar Al/Cu ultra-thin sheets
Yue Mao et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Characterizations of microstructure, crystallographic texture and mechanical properties of dissimilar friction stir welding joints for AA2024 and AA7075 under different tool shoulder end profiles
Chenghang Zhang et al.
MATERIALS TODAY COMMUNICATIONS (2020)
Modelling and optimisation of hardness behaviour of sintered Al/SiC composites using RSM and ANN: a comparative study
Mohammad Azad Alam et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Characterization of dissimilar friction stir welded lap joints of AA5083 and GL D36 steel
Bruna Fernanda Batistao et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
A review on nanomaterials reinforcement in friction stir welding
Sufian Raja et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Optimization of friction stir welding process parameters for AA6063-ETP copper using central composite design
Nitin Panaskar et al.
WORLD JOURNAL OF ENGINEERING (2020)
Tool eccentricity in friction stir welding: a comprehensive review
L. H. Shah et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
Electrical and mechanical properties of friction stir welded Al-Cu butt joints
N. Eslami et al.
WELDING IN THE WORLD (2019)
Ultrasonic vibration assisted friction stir welding of aluminium alloy and pure copper
Najib A. Muhammad et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Analysis of the Temperature Field in Al-Cu Dissimilar Materials Friction Stir Welding
Hongyu Sun et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Microstructure and Mechanical Properties of Dissimilar Al - Cu Joints Formed by Friction Stir Welding
E. N. Ryl'kov et al.
METAL SCIENCE AND HEAT TREATMENT (2019)
Friction Stir Welding of Copper: Numerical Modeling and Validation
Pankaj Sahlot et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)
Effect of a Zinc Interlayer on a Cu/Al Lap Joint in Ultrasound-Assisted Friction Stir Welding
Shujin Chen et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Influence of Tool Material, Tool Geometry, Process Parameters, Stacking Sequence, and Heat Sink on Producing Sound Al/Cu Lap Joints through Friction Stir Welding
Hongyu Wei et al.
METALS (2019)
Effect of knurling shoulder design with polygonal pins on material flow and mechanical properties during friction stir welding of Al-Mg-Si alloy
Krishna Kishore Mugada et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2019)
Effect of Tilt Angle and Pin Depth on Dissimilar Friction Stir Lap Welded Joints of Aluminum and Steel Alloys
Veerendra Chitturi et al.
MATERIALS (2019)
Numerical modelling on cooling assisted friction stir welding of dissimilar Al-Cu joint
Nirav P. Patel et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Gaussian process regression to predict the morphology of friction-stir-welded aluminum/copper lap joints
M. Krutzlinger et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Weldability and shear strength feasibility study for automotive electric vehicle battery tab interconnects
Abhishek Das et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Optimization of Process Parameters for Friction Stir Welding of Aluminum and Copper Using the Taguchi Method
Nima Eslami et al.
METALS (2019)
Role of tool design on thermal cycling and mechanical properties of a high-speed micro friction stir welded 7075-T6 aluminum alloy
Y. Ni et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Effect of tool pin side area ratio on temperature distribution in friction stir welding
A. M. Sadoun et al.
RESULTS IN PHYSICS (2019)
Temperature-controlled friction stir welding process of Al-Cu joints with complex geometries
Sophie Grabmann et al.
PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) (2019)
Effect of solid solution phase constitution on dissimilar Al/Cu FSW using Zn as an alloying element at the joint interface
Prakash Kumar Sahu et al.
SN APPLIED SCIENCES (2019)
Microstructure characterization and mechanical behavior of dissimilar friction stir welded Al/Cu couple with different joint configurations
Wei Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
On the effect of tool offset in hybrid-FSW of copper-aluminium alloy
D. K. Yaduwanshi et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Improving interface morphology and shear failure load of friction stir lap welding by changing material concentrated zone location
Zhenlei Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Special welding parameters study on Cu/Al joint in laser-heated friction stir welding
Xinjiang Fei et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Effect of Heat Input on the Mechanical Behaviour of Al-Cu FSW Lap Joints
Aldoni Gabriel Wiedenhoft et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2018)
Friction Stir Welding of Dissimilar Al/Al and Al/Non-Al Alloys: A Review
Xiangbin Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)
Numerical model for prediction of tool wear and worn-out pin profile during friction stir welding
Pankaj Sahlot et al.
WEAR (2018)
Dissimilar Joining of Pure Copper to Aluminum Alloy via Friction Stir Welding
Farhad Bakhtiari Argesi et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2018)
State-of-the-Art and Energy Management System of Lithium-Ion Batteries in Electric Vehicle Applications:Issues and Recommendations
Mahammad A. Hannan et al.
IEEE ACCESS (2018)
The study of material flow behaviour in dissimilar material FSW of AA6061 and Cu-B370 alloys plates
Arun Kumar Kadian et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
The origin of different microstructural and strengthening mechanisms of copper and brass in their dissimilar friction stir welded joint
Akbar Heidarzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Dissimilar Friction Stir Butt Welding of Aluminum and Copper with Cross-Section Adjustment for Current-Carrying Components
Nima Eslami et al.
METALS (2018)
Effect of pin profile on microstructure and mechanical properties of friction stir spot welded Al-Cu dissimilar metals
L. Zhou et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Intermetallic layers in temperature controlled Friction Stir Welding of dissimilar Al-Cu-joints
R. Marstatt et al.
20TH CHEMNITZ SEMINAR ON MATERIALS ENGINEERING (2018)
Comparison of Osteoconduction, cytocompatibility and corrosion protection performance of hydroxyapatite-calcium hydrogen phosphate composite coating synthesized in-situ through pulsed electro-deposition with varying amount of phase and crystallinity
Rajib Chakraborty et al.
SURFACES AND INTERFACES (2018)
Review on friction stir welding of magnesium alloys
Kulwant Singh et al.
JOURNAL OF MAGNESIUM AND ALLOYS (2018)
Numerical and experimental investigation of thermal history, material flow and mechanical properties of friction stir welded aluminium alloy to DHP copper dissimilar joint
T. K. Bhattacharya et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Analysis on the Fracture of Al-Cu Dissimilar Materials Friction Stir Welding Lap Joint
Hongyu Sun et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Hybrid approaches of assisted heating and cooling for friction stir welding of copper to aluminum joints
Kush P. Mehta et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Development of processing windows for friction stir spot welding of aluminium Al5052/copper C27200 dissimilar materials
S. Siddharth et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
A Comparison of Different Finite Element Methods in the Thermal Analysis of Friction Stir Welding (FSW)
Bahman Meyghani et al.
METALS (2017)
Strength and failure analysis of similar and dissimilar friction stir spot welds: Influence of different tools and pin geometries
Ashu Garg et al.
MATERIALS & DESIGN (2017)
The effect of preheating on mechanical properties of friction stir welded dissimilar joints of pure copper and AA7075 aluminum alloy sheets
Seyed Vahid Safi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Influence of plate position, tool offset and tool rotational speed on mechanical properties and microstructures of dissimilar Al/Cu friction stir welding joints
Prakash Kumar Sahu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
3-dimensional numerical analysis of friction stir welding of copper and aluminum
M. E. Aalami-Aleagha et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Critical review on friction stir welding of aluminium to copper
I. Galvao et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2016)
Evolving properties of friction stir spot welds between AA1060 and commercially pure copper C11000
Mukuna P. Mubiayi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Effect of Friction Stir Welding Parameters on the Mechanical and Microstructure Properties of the Al-Cu Butt Joint
Sare Celik et al.
METALS (2016)
Numerical modeling and experimental investigation on plasma-assisted hybrid friction stir welding of dissimilar materials
D. K. Yaduwanshi et al.
MATERIALS & DESIGN (2016)
Effects of Tilt Angle on the Properties of Dissimilar Friction Stir Welding Copper to Aluminum
Kush P. Mehta et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
FRICTION STIR WELDS OF Al ALLOY-Cu: AN INVESTIGATION ON EFFECT OF PLUNGE DEPTH
Mohd Atif Wahid et al.
ARCHIVE OF MECHANICAL ENGINEERING (2016)
Influence of tool design and process parameters on dissimilar friction stir welding of copper to AA6061-T651 joints
Kush P. Mehta et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Thermal Performance Evaluation of Friction Stir Welded and Bolted Cold Plates with Al/Cu Interface
A. K. Lakshminarayanan et al.
JOM (2015)
Tool travel speed effects on the microstructure of friction stir welded aluminum-copper joints
M. Felix Xavier Muthu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Banded structures in friction stir welded Al alloys
A. Tongne et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Effect of tool shoulder features on defects and tensile properties of friction stir welded aluminum 6061-T6
Luis Trueba et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
The dissimilar friction stir lap welding of 1A99 Al to pure Cu using Zn as filler metal with pinless tool configuration
Binbin Kuang et al.
MATERIALS & DESIGN (2015)
Self-piercing riveting of similar and dissimilar metal sheets of aluminum alloy and copper alloy
Xiaocong He et al.
MATERIALS & DESIGN (2015)
Corrosion susceptibility of dissimilar friction stir welds of AA5083 and AA6082 alloys
U. Donatus et al.
MATERIALS CHARACTERIZATION (2015)
Effect of Interfacial Microstructure Evolution on Mechanical Properties and Fracture Behavior of Friction Stir-Welded Al-Cu Joints
P. Xue et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Microstructure and mechanical properties of dissimilar Al-Cu joints by friction stir welding
Qiu-zheng Zhang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Studying of tool rotation speed on mechanical properties of copper-Al5083 butt joint welded by friction stir welding
Hossein Bisadi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
Factors influencing Al-Cu weld properties by intermetallic compound formation
Paul Kah et al.
INTERNATIONAL JOURNAL OF MECHANICAL AND MATERIALS ENGINEERING (2015)
Establishing a correlation between interfacial microstructures and corrosion initiation sites in Al/Cu joints by SEM-EDS and AFM-SKPFM
M. Sarvghad-Moghaddam et al.
CORROSION SCIENCE (2014)
Experimental and theoretical analysis of friction stir welding of Al-Cu joints
Ahmed O. Al-Roubaiy et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Investigation on dissimilar underwater friction stir lap welding of 6061-T6 aluminum alloy to pure copper
Jingqing Zhang et al.
MATERIALS & DESIGN (2014)
Effects of processing parameters on corrosion properties of dissimilar friction stir welds of aluminium and copper
Esther T. Akinlabi et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Effect of Tool Pin Insertion Depth on Friction Stir Lap Welding of Aluminum to Stainless Steel
Yanni Wei et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
Influence of aluminium alloy type on dissimilar friction stir lap welding of aluminium to copper
I. Galvao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
The influences of rotational and welding speeds on microstructures and mechanical properties of friction stir welded Al5083 and commercially pure copper sheets lap joints
H. Bisadi et al.
MATERIALS & DESIGN (2013)
Microstructural evolution and mechanical properties of dissimilar Al-Cu joints produced by friction stir welding
C. W. Tan et al.
MATERIALS & DESIGN (2013)
Enhancing metallurgical and mechanical properties of friction stir lap welding of Al-Cu using intermediate layer
M. Akbari et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2013)
Solid-state welding of aluminum to copper-case studies
Jean Pierre Bergmann et al.
WELDING IN THE WORLD (2013)
Effect of Shoulder Size on Weld Properties of Dissimilar Metal Friction Stir Welds
E. T. Akinlabi
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
The role of Metal-Matrix Composite development During Friction Stir Welding of Aluminum to Brass in Weld Characteristics
H. R. Zareie Rajani et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Al-to-Cu Friction Stir Lap Welding
Vahid Firouzdor et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Multiscale Study of Interfacial Intermetallic Compounds in a Dissimilar Al 6082-T6/Cu Friction-Stir Weld
M. N. Avettand-Fenoel et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Influence of Tool Offsetting on the Structure and Morphology of Dissimilar Aluminum to Copper Friction-Stir Welds
Ivan Galvao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Effect of materials position on friction stir lap welding of Al to Cu
M. Akbari et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2012)
Microstructure and mechanical properties of dissimilar pure copper/1350 aluminum alloy butt joints by friction stir welding
Li Xia-wei et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy
X. Cao et al.
MATERIALS & DESIGN (2011)
Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cu joints
P. Xue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Formation and distribution of brittle structures in friction stir welding of aluminium and copper: influence of process parameters
I. Galvao et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2011)
Achieving high property friction stir welded aluminium/copper lap joint at low heat input
P. Xue et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2011)
Review: friction stir welding tools
R. Rai et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2011)
Weldability and mechanical properties of dissimilar aluminum-copper lap joints made by friction stir welding
T. Saeid et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Material flow in heterogeneous friction stir welding of aluminium and copper thin sheets
I. Galvao et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Corrosion behavior of hypoeutectic Al-Cu alloys in H2SO4 and NaCl solutions
Wislei R. Osorio et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2009)
Microstructural and mechanical properties of friction stir welded aluminum/copper lap joints
A. Abdollah-Zadeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
The roles of macro segregation and of dendritic array spacings on the electrochemical behavior of an Al-4.5 wt.% Cu alloy
W. R. Osorio et al.
ELECTROCHIMICA ACTA (2007)
Effect of tool shape on mechanical properties and microstructure of friction stir welded aluminum alloys
H Fujii et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper
JH Ouyang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Microstructure and pitting corrosion of partially melted zones of Al alloy GTA welds
KS Rao et al.
MATERIALS SCIENCE AND TECHNOLOGY (2005)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Effects of intermetallic compound on the electrical and mechanical properties of friction welded Cu/Al bimetallic joints during annealing
WB Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
Effects of Cu/Al intermetallic compound (IMC) on copper wire and aluminum pad bondability
HJ Kim et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2003)
Growth rate of intermetallic compounds in Al/Cu bimetal produced by cold roll welding process
M Abbasi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2001)
Share Paper
