Related references
Note: Only part of the references are listed.In-situ SEM based method for assessing fiber-matrix interface shear strength in CFRPs
Sarvenaz Ghaffari et al.
MATERIALS & DESIGN (2021)
Constitutive models for the structural analysis of composite materials for the finite element analysis: A review of recent practices
Qian Guo et al.
COMPOSITE STRUCTURES (2021)
Effect of graphene oxide surface treatment on the interfacial adhesion and the tensile performance of flax epoxy composites
F. Javanshour et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Brucite fibers on performance improvement and mechanism of high-temperature slag cementing slurries
Ming Li et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2020)
Numerical investigation of matrix cracking propagation in cross-ply laminated composites subjected to three-point bending load using concurrent multiscale model
Hamidreza Madadi et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2020)
Prediction of debonding growth in two-dimensional RVEs using an extended interface element based on continuum damage mechanics concept
Ramzan Babaei et al.
COMPOSITE STRUCTURES (2020)
Interfacial reinforcement mechanism in poly(lactic acid)/natural fiber biocomposites featuring ZnO nanowires at the interface
Changhua Yang et al.
MATERIALS & DESIGN (2020)
The use of X-ray computed tomography for design and process modeling of aerospace composites: A review
K. Naresh et al.
MATERIALS & DESIGN (2020)
Anisotropic Motions of Fibrils Dictated by Their Orientations in the Lamella: A Coarse-Grained Model of a Plant Cell Wall
Sriramvignesh Mani et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2020)
Influence of coupling agent on altering the reinforcing efficiency of natural fibre-incorporated polymers - A review
Manju Sri Anbupalani et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2020)
New interlaminar features and void distributions in advanced aerospace-grade composites revealed via automated algorithms using micro-computed tomography
Nathan K. Fritz et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Fracture investigation of functionalized carbon nanotubes-grown carbon fiber fabrics/epoxy composites
Zhiqiang Yao et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Classification of mechanism of reinforcement in the fiber-matrix interface: Application of Machine Learning on nanoindentation data
Georgios Konstantopoulos et al.
MATERIALS & DESIGN (2020)
Nanoscale in situ observations of crack initiation and propagation in carbon fiber/epoxy composites using synchrotron radiation X-ray computed tomography
Toshiki Watanabe et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2020)
Investigation of the Interlaminar Shear Properties of Fiber-Reinforced Polymers via Flexural Testing Using Digital Image Correlation
Matthias Merzkirch et al.
MATERIALS PERFORMANCE AND CHARACTERIZATION (2020)
Molecular dynamics study on the effect of salt environment on interfacial structure, stress, and adhesion of carbon fiber/epoxy interface
Lik-ho Tam et al.
COMPOSITE INTERFACES (2019)
Reduced interfacial adhesion in glass fibre-epoxy composites due to water absorption via molecular dynamics simulations
Mark T. Stoffels et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
A review on enhancement of mechanical and tribological properties of polymer composites reinforced by carbon nanotubes and graphene sheet: Molecular dynamics simulations
Yunlong Li et al.
COMPOSITES PART B-ENGINEERING (2019)
A thermo-mechanical cyclic cohesive zone model for variable amplitude loading and mixed-mode behavior
M. Springer et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)
Mode-I interlaminar fracture toughness of flax, glass and hybrid flax-glass fibre woven composites: Failure mechanism evaluation using acoustic emission analysis
El Hadi Saidane et al.
POLYMER TESTING (2019)
Effects of Fiber Surface Grafting with Nano-Clay on the Hydrothermal Ageing Behaviors of Flax Fiber/Epoxy Composite Plates
Anni Wang et al.
POLYMERS (2019)
Enhancing Mode I and Mode II interlaminar fracture toughness of flax fibre reinforced epoxy composites with nano TiO2
Vishnu Prasad et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Mesoscale modelling of damage in single- and double-shear composite bolted joints
Fujian Zhuang et al.
COMPOSITE STRUCTURES (2019)
Mode I delamination behaviour of carbon/epoxy composite at different displacement rates
K. O. Low et al.
COMPOSITES PART B-ENGINEERING (2019)
Mesoscale modelling of damage in half-hole pin bearing composite laminate specimens
Fujian Zhuang et al.
COMPOSITE STRUCTURES (2019)
Improvement of the mode I interlaminar fracture toughness of carbon fiber; composite reinforced with electrospun nylon nanofiber
Mohannad T. Aljarrah et al.
COMPOSITES PART B-ENGINEERING (2019)
Nanoindentation mapping of multiscale composites of graphene-reinforced polypropylene and carbon fibres
Patricia Enrique-Jimenez et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Improving interfacial and mechanical properties of glass fabric/polyphenylene sulfide composites via grafting multi-walled carbon nanotubes
Junfeng Li et al.
RSC ADVANCES (2019)
Prediction of Mode I interlaminar fracture toughness of stitched flax fiber composites
M. Ravandi et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Graphene oxide decorated sisal fiber/MAPP modified PP composites: Toward high-performance biocomposites
Juan Chen et al.
POLYMER COMPOSITES (2018)
Effects of moisture ingress on the bond between carbon fiber and epoxy resin investigated with molecular dynamics simulation
Yanrong Xiao et al.
POLYMER COMPOSITES (2018)
Interfacial adhesion assessment in flax/epoxy and in flax/vinylester composites by single yarn fragmentation test: Correlation with micro-CT analysis
M. C. Seghini et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Influence of natural fibers characteristics on the interface mechanics with cement based matrices
Saulo Rocha Ferreira et al.
COMPOSITES PART B-ENGINEERING (2018)
A cohesive zone model incorporating a Coulomb friction law for fiber-reinforced composites
Guodong Nian et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
X-ray computed tomography of polymer composites
S. C. Garcea et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Optimal synergy between micro and nano scale: Hierarchical all carbon composite fibers for enhanced stiffness, interfacial shear strength and Raman strain sensing
Kyriaki Tsirka et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
A Delamination Propagation Model for Fiber Reinforced Laminated Composite Materials
David Aveiga et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2018)
High-Performance Graphene-Based Natural Fiber Composites
Forkan Sarker et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Investigation of mechanical, thermal and water absorption properties of flax fibre reinforced epoxy composite with nano TiO2 addition
Vishnu Prasad et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Influence of kenaf fabric on the tensile performance of environmentally sustainable fibre metal laminates
D. Sivakumar et al.
ALEXANDRIA ENGINEERING JOURNAL (2018)
Comparison of cohesive zone and continuum damage approach in predicting the static failure of adhesively bonded single lap joints
Sugiman Sugiman et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2017)
Appropriate shape of cohesive zone model for delamination propagation in ENF specimens with R-curve effects
M. Heidari-Rarani et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2017)
Nanoscale evaluation of multi-layer interfacial mechanical properties of sisal fiber reinforced composites by nanoindentation technique
Qian Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2017)
Influence of microbond test parameters on interfacial shear strength of fiber reinforced polymer-matrix composites
Chao Zhi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Effect of surface modification on morphological, mechanical and thermal conductivity of hemp fiber: Characterization of the interface of hemp -Polyurethane composite
S. Sair et al.
CASE STUDIES IN THERMAL ENGINEERING (2017)
Effect of water absorption on Mode I interlaminar fracture toughness of flax/basalt reinforced vinyl ester hybrid composites
F. A. Almansour et al.
COMPOSITE STRUCTURES (2017)
Fracture behaviour of bamboo fiber reinforced epoxy composites
Ziaullah Khan et al.
COMPOSITES PART B-ENGINEERING (2017)
Understanding the effect of temperature on the interfacial behavior of CFRP-wood composite via molecular dynamics simulations
Lik-ho Tam et al.
COMPOSITES PART B-ENGINEERING (2017)
Modification of flax fiber surface and its compatibilization in polylactic acid/flax composites
Xuelian Xia et al.
IRANIAN POLYMER JOURNAL (2016)
Tuning the luminescence and optical properties of graphene oxide and reduced graphene oxide functionnalized with PVA
Meryem Goumri et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)
SEM-EDX analysis and TOF-SIMS 3D imaging of a textile/rubber interface undergoing fatigue loading
C. Valantin et al.
APPLIED SURFACE SCIENCE (2016)
On the Interfacial Properties of Polymers/Functionalized Single-Walled Carbon Nanotubes
R. Ansari et al.
BRAZILIAN JOURNAL OF PHYSICS (2016)
Mechanical properties of Napier grass fibre/polyester composites
M. J. A. Haameem et al.
COMPOSITE STRUCTURES (2016)
A review of recent developments in natural fibre composites and their mechanical performance
K. L. Pickering et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Numerical modelling of flax short fibre reinforced and flax fibre fabric reinforced polymer composites
Janis Sliseris et al.
COMPOSITES PART B-ENGINEERING (2016)
Interface and bonding mechanisms of plant fibre composites: An overview
Yonghui Zhou et al.
COMPOSITES PART B-ENGINEERING (2016)
A review of recent research on the use of cellulosic fibres, their fibre fabric reinforced cementitious, geo-polymer and polymer composites in civil engineering
Libo Yan et al.
COMPOSITES PART B-ENGINEERING (2016)
Microstructural characterization of additively manufactured multi-directional preforms and composites via X-ray micro-computed tomography
Zhenzhen Quan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2016)
Molecular Dynamics Simulation of the Adsorption of Polymer Chains on CNTs, BNNTs and GaNNTs
Saeed Rouhi
FIBERS AND POLYMERS (2016)
Effects of maleic anhydride content on mechanical properties of carbon fibers-reinforced maleic anhydride-grafted-poly-propylene matrix composites
Hyun-Il Kim et al.
CARBON LETTERS (2016)
Effect of Acetyl Group on Mechanical Properties of Chitin/Chitosan Nanocrystal: A Molecular Dynamics
Junhe Cui et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2016)
Environmental effects on fibre reinforced polymeric composites: Evolving reasons and remarks on interfacial strength and stability
Sanghamitra Sethi et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2015)
Imaging the interphase of carbon fiber composites using transmission electron microscopy: Preparations by focused ion beam, ion beam etching, and ultramicrotomy
Wu Qing et al.
CHINESE JOURNAL OF AERONAUTICS (2015)
An investigation of matrix damage in composite laminates using continuum damage mechanics
M. Salavatian et al.
COMPOSITE STRUCTURES (2015)
Continuum damage modeling and progressive failure analysis of carbon fiber/epoxy composite pressure vessel
Liang Wang et al.
COMPOSITE STRUCTURES (2015)
Multiscale finite element analysis of mode I delamination growth in a fabric composite
Tadayoshi Yamanaka et al.
COMPOSITE STRUCTURES (2015)
Discrete element modelling of unidirectional fibre-reinforced polymers under transverse tension
Yaser Ismail et al.
COMPOSITES PART B-ENGINEERING (2015)
Influence of graphene nanoplatelets on modes I, II and III interlaminar fracture toughness of fiber-reinforced polymer composites
B. Ahmadi-Moghadam et al.
ENGINEERING FRACTURE MECHANICS (2015)
Atomistic investigation of the interfacial mechanical characteristics of carbon nanotube reinforced epoxy composite
Q. L. Xiong et al.
EUROPEAN POLYMER JOURNAL (2015)
XFEM modeling of short microfiber reinforced composites with cohesive interfaces
Matthew G. Pike et al.
FINITE ELEMENTS IN ANALYSIS AND DESIGN (2015)
Effects of temperature and loading speed on interface-dominated strength in fibre/polymer composites: An evaluation for in-situ environment
Sanghamitra Sethi et al.
MATERIALS & DESIGN (2015)
The influence of moisture content on the interfacial properties of natural palm fiber-matrix composite
Wangyu Liu et al.
WOOD SCIENCE AND TECHNOLOGY (2015)
A review of discrete modeling techniques for fracturing processes in discontinuous rock masses
A. Lisjak et al.
JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2014)
Fabrication of Borassus fruit lignocellulose fiber/PP composites and comparison with jute, sisal and coir fibers
P. Sudhakara et al.
CARBOHYDRATE POLYMERS (2013)
Flexural and impact response of woven glass fiber fabric/polypropylene composites
P. Russo et al.
COMPOSITES PART B-ENGINEERING (2013)
Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites
Yongli Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
The glass fiber-polymer matrix interface/interphase characterized by nanoscale imaging techniques
V. Cech et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Mode III interlaminar fracture and damage characterization in woven fabric-reinforced glass/epoxy composite laminates
Farhad Asgari Mehrabadi et al.
JOURNAL OF COMPOSITE MATERIALS (2013)
Modeling the inelastic deformation and fracture of polymer composites - Part II: Smeared crack model
P. P. Camanho et al.
MECHANICS OF MATERIALS (2013)
Nanoindentation and nanoscratching responses of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica
A. Molazemhosseini et al.
POLYMER TESTING (2013)
REACH Coarse-Grained Simulation of a Cellulose Fiber
Dennis C. Glass et al.
BIOMACROMOLECULES (2012)
Bamboo fiber and its reinforced composites: structure and properties
Dagang Liu et al.
CELLULOSE (2012)
Simulation of drop-weight impact and compression after impact tests on composite laminates
E. V. Gonzalez et al.
COMPOSITE STRUCTURES (2012)
Carbon fibre pullout under the influence of residual thermal stresses in polymer matrix composites
Yuanyuan Jia et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Numerical simulation of the non-linear deformation of 5-harness satin weaves
A. R. Melro et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Analysis of the interdiffusion of resin monomers into pre-polymerized fiber-reinforced composites
Diana Wolff et al.
DENTAL MATERIALS (2012)
Mechanical properties of high density polyethylene reinforced with chemically modified coir fibers: Impact of chemical treatments
F. Z. Arrakhiz et al.
MATERIALS & DESIGN (2012)
Silane coupling agents used for natural fiber/polymer composites: A review
Yanjun Xie et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Interlaminar Fracture Toughness of Vectran-stitched Composites - Experimental and Computational Analysis
K. T. Tan et al.
JOURNAL OF COMPOSITE MATERIALS (2010)
AFM indentation method used for elastic modulus characterization of interfaces and thin layers
M. A. Monclus et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Mode III interlaminar fracture of carbon/epoxy laminates using the edge crack torsion (ECT) test
A. B. de Morais et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
DCB test simulation of stitched CFRP laminates using interlaminar tension test results
Yutaka Iwahori et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Curved-fiber pull-out model for nanocomposites. Part 2: Interfacial debonding and sliding
Xinyu Chen et al.
MECHANICS OF MATERIALS (2009)
Curved-fiber pull-out model for nanocomposites. Part 1: Bonded stage formulation
Xinyu Chen et al.
MECHANICS OF MATERIALS (2009)
A Three-dimensional Damage Model for Transversely Isotropic Composite Laminates
P. Maimi et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Silane coupling agents in polymer-based reinforced composites: A review
Shirin Shokoohi et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2008)
A continuum damage model for composite laminates:: Part I -: Constitutive model
P. Maimi et al.
MECHANICS OF MATERIALS (2007)
A continuum damage model for composite laminates:: Part II -: Computational implementation and validation
P. Maimi et al.
MECHANICS OF MATERIALS (2007)
AFM characterization of the interfacial properties of carbon fiber reinforced polymer composites subjected to hygrothermal treatments
Ying Wang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Natural-fiber-reinforced polymer composites applications in automotive
James Holbery et al.
JOM (2006)
Combining interface damage and friction in a cohesive-zone model
Giulio Alfano et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2006)
Characterization of polymer nanocomposite interphase and its impact on mechanical properties
Dan Ciprari et al.
MACROMOLECULES (2006)
Morphology and mechanical properties of chitosan fibers obtained by gel-spinning: Influence of the dry-jet-stretching step and ageing
Laure Notin et al.
ACTA BIOMATERIALIA (2006)
Molecular dynamics: Survey of methods for simulating the activity of proteins
Stewart A. Adcock et al.
CHEMICAL REVIEWS (2006)
Functionalized composite structures for new generation airframes: a review
L Ye et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Finite element simulation of shaped ductile fiber pullout using a mixed cohesive zone/friction interface model
JH Tsai et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Nanocomposites: issues at the interface
H. Daniel Wagner et al.
MATERIALS TODAY (2004)
Effect of stitch distribution on mode I delamination toughness of laminated DCB specimens
XN Sun et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Interfacial fracture energy measurements for multi-walled carbon nanotubes pulled from a polymer matrix
AH Barber et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Detachment of nanotubes from a polymer matrix
CA Cooper et al.
APPLIED PHYSICS LETTERS (2002)
Chemical modification of hemp, sisal, jute, and kapok fibers by alkalization
LY Mwaikambo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Characterisation of interphase nanoscale property variations in glass fibre reinforced polypropylene and epoxy resin composites
SL Gao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2002)
Simulation of fiber debonding with friction in a model composite pushout test
G Lin et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2001)
Recycling by pyrolysis of thermoset composites:: characteristics of the liquid and gaseous fuels obtained
A Torres et al.
FUEL (2000)
Effects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites
J Gassan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
Effect of interfacial adhesion and statistical fiber strength on tensile strength of unidirectional glass fiber/epoxy composites. Part I: experiment results
FM Zhao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)