Related references
Note: Only part of the references are listed.Development of basalt fiber engineered cementitious composites and its mechanical properties
Mingfeng Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Experimental Study on the Effect of Basalt Fiber and Sodium Alginate in Polymer Concrete Exposed to Elevated Temperature
Seyed Esmaeil Mohammadyan-Yasouj et al.
PROCESSES (2021)
Influence of waste alumina powder on self-compacting concrete resistance under elevated temperature
Seyed Esmaeil Mohammadyan-Yasouj et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Effect of Alumina Additives on Mechanical and Fresh Properties of Self-Compacting Concrete: A Review
Hoofar Shokravi et al.
PROCESSES (2021)
Discontinuous micro-fibers as intrinsic reinforcement for ductile Engineered Cementitious Composites (ECC)
Duo Zhang et al.
COMPOSITES PART B-ENGINEERING (2020)
Numerical simulation of self-consolidating engineered cementitious composite flow with the V-funnel and U-box
Hai Tran Thanh et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Health Monitoring of Civil Infrastructures by Subspace System Identification Method: An Overview
Hoofar Shokravi et al.
APPLIED SCIENCES-BASEL (2020)
A Comparative Study of the Data-Driven Stochastic Subspace Methods for Health Monitoring of Structures: A Bridge Case Study
Hoofar Shokravi et al.
APPLIED SCIENCES-BASEL (2020)
Application of the Subspace-Based Methods in Health Monitoring of Civil Structures: A Systematic Review and Meta-Analysis
Hoofar Shokravi et al.
APPLIED SCIENCES-BASEL (2020)
Influence of flexural loading and chloride exposure on the fatigue behavior of high-performance lightweight engineered cementitious composites
Menghuan Guo et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Use of nano-SiO2 to develop a high performance green lightweight engineered cementitious composites containing fly ash cenospheres
Bin Xi et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Investigation on interface fracture properties and nonlinear fracture model between ECC and concrete subjected to salt freeze-thaw cycles
Xiaowei Wu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Vehicle-Assisted Techniques for Health Monitoring of Bridges
Hoofar Shokravi et al.
SENSORS (2020)
Thermal Performance of Alginate Concrete Reinforced with Basalt Fiber
Seyed Esmaeil Mohammadyan-Yasouj et al.
CRYSTALS (2020)
Effect of exposure conditions on self-healing behavior of engineered cementitious composite incorporating limestone powder
Xinchun Guan et al.
CEMENT & CONCRETE COMPOSITES (2020)
Shear behavior of RC slender beams without stirrups by using precast U-shaped ECC permanent formwork
Rui Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Macro- and Micro-Properties of Engineered Cementitious Composites (ECCs) Incorporating Industrial Waste Materials: A Review
Ashraf A. Bahraq et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)
Human Scalp Hair as Fiber Reinforcement in Cement Concrete
Shanker Lal Meghwar et al.
MEHRAN UNIVERSITY RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY (2020)
Feasibility study of ECC with self-healing capacity applied on the long-span steel bridge deck overlay
Zhigang Zhang et al.
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2019)
Mechanical properties tests and multiscale numerical simulations for basalt fiber reinforced concrete
Xinjian Sun et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effect of morphological parameters of natural sand on mechanical properties of engineered cementitious composites
Hao-Liang Wu et al.
CEMENT & CONCRETE COMPOSITES (2019)
Experimental study of some durability properties of ECC with a more environmentally sustainable rice husk ash and high tenacity polypropylene fibers
F. B. P. da Costa et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Cyclic response of RC composite bridge columns with precast PP-ECC jackets in the region of plastic hinges
Rui Zhang et al.
COMPOSITE STRUCTURES (2019)
ECC Design Based on Uniform Design Test Method and Alternating Conditional Expectation
Xiaoqin Li et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2019)
Performance and composition analysis of engineered cementitious composite (ECC) - A review
Maninder Singh et al.
JOURNAL OF BUILDING ENGINEERING (2019)
Micromechanics theory guidelines and method exploration for surface treatment of PVA fibers used in high-ductility cementitious composites
Cong Ding et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effects of High Temperature on Mechanical Properties of Polyvinyl Alcohol Engineered Cementitious Composites (PVA-ECC)
Qiang Du et al.
INTERNATIONAL JOURNAL OF CIVIL ENGINEERING (2018)
Flaw characterization and correlation with cracking strength in Engineered Cementitious Composites (ECC)
Cong Lu et al.
CEMENT AND CONCRETE RESEARCH (2018)
Effect of engineered cementitious composite on the bond behavior between fiber-reinforced polymer and concrete
Lili Sui et al.
COMPOSITE STRUCTURES (2018)
Composite Properties and Micromechanical Analysis of Highly Ductile Cement Composite Incorporating Limestone Powder
Jung Hwan Hyun et al.
APPLIED SCIENCES-BASEL (2018)
Experimental and Numerical Study to Determine the Relationship between Tensile Strength and Compressive Strength of Concrete
Baitollah Badarloo et al.
CIVIL ENGINEERING JOURNAL-TEHRAN (2018)
Strength and Durability of High Volume Fly Ash in Engineered Cementitious Composites
Arun Kumar Ammasi et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Strength Improvement of Strain-Hardening Cementitious Composites with Ultrahigh-Volume Fly Ash
Jing Yu et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2017)
Development of reinforced ultra-high toughness cementitious composite permanent formwork: Experimental study and Digital Image Correlation analysis
Bo-Tao Huang et al.
COMPOSITE STRUCTURES (2017)
Micromechanics constitutive modelling and optimization of strain hardening geopolymer composite
Behzad Nematollahi et al.
CERAMICS INTERNATIONAL (2017)
Coupled effects of crack width, slag content, and conditioning alkalinity on autogenous healing of engineered cementitious composites
Jishen Qiu et al.
CEMENT & CONCRETE COMPOSITES (2016)
Mechanical performance of ECC with high-volume fly ash after sub-elevated temperatures
Jiangtao Yu et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Study on mechanical properties of cost-effective polyvinyl alcohol engineered cementitious composites (PVA-ECC)
Zuanfeng Pan et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Application of PP-ECC in beam-column joint connections of rigid-framed railway bridges to reduce transverse reinforcements
Rui Zhang et al.
ENGINEERING STRUCTURES (2015)
Tensile Strain Hardening Behavior of PVA Fiber-Reinforced Engineered Geopolymer Composite
Behzad Nematollahi et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)
Strength and deformation characteristics of engineered cementitious composite slabs with different polymer fibres
Shwan H. Said et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)
The effect of synthetic polyethylene fiber on the strain hardening behavior of engineered cementitious composite (ECC)
Shwan H. Said et al.
MATERIALS & DESIGN (2015)
High-early-strength ductile cementitious composites with characteristics of low early-age shrinkage for repair of infrastructures
Mustafa Sahmaran et al.
MATERIALS AND STRUCTURES (2015)
Effect of elevated temperature on strain-hardening engineered cementitious composites
Prakash S. Bhat et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Abrasion resistance and fracture energy of concretes with basalt fiber
Nihat Kabay
CONSTRUCTION AND BUILDING MATERIALS (2014)
A feasibility study of strain hardening fiber reinforced fly ash-based geopolymer composites
Motohiro Ohno et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Application of low modulus polymeric fibers in engineered cementitious composites
Mana Halvaei et al.
JOURNAL OF INDUSTRIAL TEXTILES (2014)
Mechanical Properties of High-Performance Concrete Reinforced with Basalt Fibers
Tehmina Ayub et al.
FOURTH INTERNATIONAL SYMPOSIUM ON INFRASTRUCTURE ENGINEERING IN DEVELOPING COUNTRIES, (IEDC 2013) (2014)
Prediction of ECC tensile stress-strain curves based on modified fiber bridging relations considering fiber distribution characteristics
Bang Yeon Lee et al.
Computers and Concrete (2013)
Mechanically Induced Cracking Behaviour in Fine and Coarse Sand Strain Hardening Cement Based Composites (SHCC) at Different Load Levels
Suvash Chandra Paul et al.
JOURNAL OF ADVANCED CONCRETE TECHNOLOGY (2013)
Quasi-static and dynamic compressive mechanical properties of engineered cementitious composite incorporating ground granulated blast furnace slag
Zhitao Chen et al.
MATERIALS & DESIGN (2013)
Improved fiber distribution and mechanical properties of engineered cementitious composites by adjusting the mixing sequence
Jian Zhou et al.
CEMENT & CONCRETE COMPOSITES (2012)
Development of recycled strain-hardening cement-based composite (SHCC) for sustainable infrastructures
Won-Chang Choi et al.
COMPOSITES PART B-ENGINEERING (2012)
Tailoring ECC for Special Attributes: A Review
Victor C. Li
INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS (2012)
Development of engineered cementitious composites with limestone powder and blast furnace slag
Jian Zhou et al.
MATERIALS AND STRUCTURES (2010)
Potential use of strain hardening ECC in permanent formwork with small scale flexural beams
Li Hedong et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2009)
Durability of mechanically loaded engineered cementitious composites under highly alkaline environments
Mustafa Sahmaran et al.
CEMENT & CONCRETE COMPOSITES (2008)
Fatigue enhancement of concrete beam with ECC layer
Christopher K. Y. Leung et al.
CEMENT AND CONCRETE RESEARCH (2007)
Practical Design Criteria for Saturated Pseudo Strain Hardening Behavior in ECC
Tetsushi Kanda et al.
JOURNAL OF ADVANCED CONCRETE TECHNOLOGY (2006)
Degradation of recycled PET fibers in Portland cement-based materials
DA Silva et al.
CEMENT AND CONCRETE RESEARCH (2005)