Related references
Note: Only part of the references are listed.Synthesis and Characterization of Alginate-Silica Gel Composites for Adsorption Dehumidification
Xu Zheng et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)
Incorporation of Horizontal Fins into a PCM-Based Heat Sink to Enhance the Safe Operation Time: Applicable in Electronic Device Cooling
Amirhosein Mosavi et al.
APPLIED SCIENCES-BASEL (2020)
Recent Developments in Coating Technologies for Adsorption Heat Pumps: A Review
Angela Capri et al.
COATINGS (2020)
A Review on the Control Parameters of Natural Convection in Different Shaped Cavities with and without Nanofluid
Sara Rostami et al.
PROCESSES (2020)
Super Atmospheric Water Harvesting Hydrogel with Alginate Chains Modified with Binary Salts
Akram Entezari et al.
ACS MATERIALS LETTERS (2020)
Experimental investigation on a fresh air dehumidification system using heat pump with desiccant coated heat exchanger
Shaowei Chai et al.
ENERGY (2019)
Experimental investigation on performance of a novel composite desiccant coated heat exchanger in summer and winter seasons
Andres S. Valarezo et al.
ENERGY (2019)
Mathematical modeling and performance evaluation of a desiccant coated fin-tube heat exchanger
Mrinal Jagirdar et al.
APPLIED ENERGY (2018)
Experimental and comparison study on heat and moisture transfer characteristics of desiccant coated heat exchanger with variable structure sizes
X. Y. Sun et al.
APPLIED THERMAL ENGINEERING (2018)
Performance evaluation of a desiccant coated heat exchanger with two different desiccant materials
Turkan Ucok Erkek et al.
APPLIED THERMAL ENGINEERING (2018)
Gravimetric method for sorption performance measurement of desiccant wheel and desiccant coated heat exchanger
Tomohiro Higashi et al.
APPLIED THERMAL ENGINEERING (2018)
Integration of solar assisted solid desiccant cooling system with efficient evaporative cooling technique for separate load handling
Ghulam Qadar Chaudhary et al.
APPLIED THERMAL ENGINEERING (2018)
Water adsorption on the coated aluminum sheets by composite materials (LiCl plus LiBr)/silica gel
Akram Entezari et al.
ENERGY (2018)
Moisture uptake dynamics on desiccant-coated, water-sorbing heat exchanger
Y. D. Tu et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)
Isothermal membrane-based air dehumidification: A comprehensive review
Ming Qu et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Recent developments in solid desiccant coated heat exchangers - A review
P. Vivekh et al.
APPLIED ENERGY (2018)
Energy-efficient and -economic technologies for air conditioning with vapor compression refrigeration: A comprehensive review
Xiaohui She et al.
APPLIED ENERGY (2018)
Review of humidity control technologies in buildings
Maher Shehadi
JOURNAL OF BUILDING ENGINEERING (2018)
Dropwise condensation on bioinspired hydrophilic-slippery surface
L. Guo et al.
RSC ADVANCES (2018)
Apparent Contact Angle Calculated from a Water Repellent Model with Pinning Effect
Shojiro Suzuki et al.
LANGMUIR (2017)
Studying the performance of a dehumidifier with adsorbent coated heat exchangers for tropical climate operations
Seung Jin Oh et al.
SCIENCE AND TECHNOLOGY FOR THE BUILT ENVIRONMENT (2017)
A review on desiccant coated heat exchangers
Asadullah Saeed et al.
SCIENCE AND TECHNOLOGY FOR THE BUILT ENVIRONMENT (2017)
Evaluation of a dehumidifier with adsorbent coated heat exchangers for tropical climate operations
Seung Jin Oh et al.
ENERGY (2017)
Comparison of performance characteristics of desiccant coated air-water heat exchanger with conventional air-water heat exchanger - Experimental and analytical investigation
X. Y. Sun et al.
ENERGY (2017)
Experimental study on performance of silica gel and potassium formate composite desiccant coated heat exchanger
T. S. Ge et al.
ENERGY (2017)
Experimental investigation of moist air condensation on hydrophilic, hydrophobic, superhydrophilic, and hybrid hydrophobic-hydrophilic surfaces
Kai-Shing Yang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Condensation on hybrid-patterned copper tubes (I): Characterization of condensation heat transfer
Mohammad Alwazzan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Desiccant-coated water-sorbing heat exchanger: Weakly-coupled heat and mass transfer
Y. D. Tu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Experimental investigation on performance of desiccant coated heat exchanger and sensible heat exchanger operating in series
T. S. Ge et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2017)
A simple way to achieve bioinspired hybrid wettability surface with micro/nanopatterns for efficient fog collection
Kai Yin et al.
NANOSCALE (2017)
A Comprehensive Empirical Correlation for Finned Heat Exchangers with Parallel Plates Working in Oscillating Flow
Jiale Huang et al.
APPLIED SCIENCES-BASEL (2017)
Optimal Design of an Air-to-Air Heat Exchanger with Cross-Corrugated Triangular Ducts by Using a Particle Swarm Optimization Algorithm
Caihang Liang et al.
APPLIED SCIENCES-BASEL (2017)
Low cost humidity controlled air-conditioning system for building energy savings in tropical climate
Azizuddin Abd Aziz et al.
JOURNAL OF BUILDING ENGINEERING (2017)
Performance analysis of a novel liquid desiccant evaporative cooling fresh air conditioning system with solution recirculation
Fan Zhang et al.
BUILDING AND ENVIRONMENT (2017)
Condensing droplet behaviors on fin surface under dehumidifying condition Part I: Numerical model
Dawei Zhuang et al.
APPLIED THERMAL ENGINEERING (2016)
Performance study of desiccant coated heat exchanger air conditioning system in winter
T. S. Ge et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Air-side heat transfer characteristics of hydrophobic and super-hydrophobic fin surfaces in heat exchangers: A review
P. Ganesan et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2016)
Key design and operating parameters for enhancing dropwise condensation through wettability patterning
Pallab Sinha Mahapatra et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Experimental investigation of solar driven desiccant air conditioning system based on silica gel coated heat exchanger
Amit Kumar et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2016)
Experimental study and performance predication of carbon based composite desiccants for desiccant coated heat exchangers
X. Zheng et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2016)
On the onset of surface condensation: formation and transition mechanisms of condensation mode
Qiang Sheng et al.
SCIENTIFIC REPORTS (2016)
Design and Fabrication of a Hybrid Superhydrophobic-Hydrophilic Surface That Exhibits Stable Dropwise Condensation
Bikash Mondal et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Performance study of SAPO-34 and FAPO-34 desiccants for desiccant coated heat exchanger systems
X. Zheng et al.
ENERGY (2015)
Experimental study on heat and mass transfer characteristics for a desiccant-coated fin-tube heat exchanger
Zhang Li et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Experimental investigation of condensation heat transfer on hybrid wettability finned tube with large amount of noncondensable gas
H. W. Hu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Performance study on composite desiccant material coated fin-tube heat exchangers
L. M. Hu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)
Experimental study on silica gel-LiCl composite desiccants for desiccant coated heat exchanger
X. Zheng et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2015)
An overview of solid desiccant dehumidification and air conditioning systems
Muhammad Sultan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
Hydrophobic/Hydrophilic Cooperative Janus System for Enhancement of Fog Collection
Moyuan Cao et al.
SMALL (2015)
Inkjet printing for direct micropatterning of a superhydrophobic surface: toward biomimetic fog harvesting surfaces
Lianbin Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Recurrent Filmwise and Dropwise Condensation on a Beetle Mimetic Surface
Youmin Hou et al.
ACS NANO (2015)
Cactus Stem Inspired Cone-Arrayed Surfaces for Efficient Fog Collection
Jie Ju et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Dynamic and microscopic simulation of the counter-current flow in a liquid desiccant dehumidifier
Yimo Luo et al.
APPLIED ENERGY (2014)
Experimental investigation on a desiccant dehumidification unit using fin-tube heat exchanger with silica gel coating
Y. Zhao et al.
APPLIED THERMAL ENGINEERING (2014)
Recent progress on desiccant materials for solid desiccant cooling systems
X. Zheng et al.
ENERGY (2014)
A review of different strategies for HVAC energy saving
Vahid Vakiloroaya et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Flow condensation heat transfer enhancement in a mini-channel with hydrophobic and hydrophilic patterns
Melanie M. Derby et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Enhancement of condensation heat transfer with patterned surfaces
Abhra Chatterjee et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
Enhancing Dropwise Condensation through Bioinspired Wettability Patterning
Aritra Ghosh et al.
LANGMUIR (2014)
Advanced performance of an open desiccant cycle with internal evaporative cooling
Constanze Bongs et al.
SOLAR ENERGY (2014)
Feasible study of a self-cooled solid desiccant cooling system based on desiccant coated heat exchanger
T. S. Ge et al.
APPLIED THERMAL ENGINEERING (2013)
Challenging offers of material science for adsorption heat transformation: A review
Yuriy I. Aristov
APPLIED THERMAL ENGINEERING (2013)
Characteristics and performance evaluation of surface-treated louvered-fin heat exchangers under frosting and wet conditions
Kyoungmin Kim et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
CuCl-intermediated construction of short-range-ordered Cu2O mesoporous spheres with excellent adsorption performance
Yang Shang et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Printable Superhydrophilic-Superhydrophobic Micropatterns Based on Supported Lipid Layers
Junsheng S. Li et al.
LANGMUIR (2012)
Biomimetic Surface Coatings for Atmospheric Water Capture Prepared by Dewetting of Polymer Films
Stuart C. Thickett et al.
ADVANCED MATERIALS (2011)
Experimental evaluation and performance enhancement prediction of desiccant assisted separate sensible and latent cooling air-conditioning system
Jiazhen Ling et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2011)
A mathematical model for predicting the performance of a compound desiccant wheel (A model of compound desiccant wheel)
T. S. Ge et al.
APPLIED THERMAL ENGINEERING (2010)
Experimental comparison and analysis on silica gel and polymer coated fin-tube heat exchangers
T. S. Ge et al.
ENERGY (2010)
Experimental investigation of a novel desiccant cooling system
Ertac Hurdogan et al.
ENERGY AND BUILDINGS (2010)
Technical development of rotary desiccant dehumidification and air conditioning: A review
D. La et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)
Supernucleating surfaces for nucleate boiling and dropwise condensation heat transfer
Neelesh A. Patankar
SOFT MATTER (2010)
Novel Biomimetic Surface Based on a Self-Organized Metal-Polymer Hybrid Structure
Daisuke Ishii et al.
CHEMISTRY OF MATERIALS (2009)
A new generation cooling device employing CaCl2-in-silica gel-water system
Bidyut Baran Saha et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
Adsorption properties of composite materials (LiCl plus LiBr)/silica
Larisa G. Gordeeva et al.
MICROPOROUS AND MESOPOROUS MATERIALS (2009)
Airside heat transfer and friction characteristics for enhanced fin-and-tube heat exchanger with hydrophilic coating under wet conditions
Xiaokui Ma et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2007)
Effects of hydrophilic coating on air side heat transfer and friction characteristics of wavy fin and tube heat exchangers under dehumidifying conditions
Xiaokui Ma et al.
ENERGY CONVERSION AND MANAGEMENT (2007)
Use of compound desiccant to develop high performance desiccant cooling system
C. X. Jia et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2007)
Mimicking a stenocara beetle's back for microcondensation using plasmachemical patterned superhydrophobic-superhydrophilic surfaces
R. P. Garrod et al.
LANGMUIR (2007)
Experimental comparison of two honeycombed desiccant wheels fabricated with silica gel and composite desiccant material
C. X. Jia et al.
ENERGY CONVERSION AND MANAGEMENT (2006)
Patterned superhydrophobic surfaces:: Toward a synthetic mimic of the Namib Desert beetle
Lei Zhai et al.
NANO LETTERS (2006)
Desiccant cooling air conditioning: a review
K Daou et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2006)
A comparison of the airside performance of the fin-and-tube heat exchangers in wet conditions; with and without hydrophilic coating
CC Wang et al.
APPLIED THERMAL ENGINEERING (2002)
Studies on solid desiccant based hybrid air-conditioning systems
PL Dhar et al.
APPLIED THERMAL ENGINEERING (2001)
Selective water sorbents for multiple applications.: 11.: CaCl2 confined to expanded vermiculite
YI Aristov et al.
REACTION KINETICS AND CATALYSIS LETTERS (2000)
Share Paper
