Related references
Note: Only part of the references are listed.Experimental Evaluation of a Novel Sensor-Based Sorting Approach Featuring Predictive Real-Time Multiobject Tracking
Georg Maier et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)
Current Applications of Recycled Aggregates from Construction and Demolition: A Review
Glaydson Simoes dos Reis et al.
MATERIALS (2021)
Development of a restraining wall and screw-extractor discharge system for continuous jig separation of mixed plastics
Theerayut Phengsaart et al.
MINERALS ENGINEERING (2021)
Copper and critical metals production from porphyry ores and E-wastes: A review of resource availability, processing/recycling challenges, socio-environmental aspects, and sustainability issues
Carlito Baltazar Tabelin et al.
RESOURCES CONSERVATION AND RECYCLING (2021)
Affinity of dual energy X-ray transmission sensors on minerals bearing heavy rare earth elements
Moacir Medeiros Veras et al.
MINERALS ENGINEERING (2020)
Optimization and dust emissions analysis of the air jigging technology applied to the recycling of construction and demolition waste
Regis P. Waskow et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2020)
Estimation of hybrid jig separation efficiency using a modified concentration criterion based on apparent densities of plastic particles with attached bubbles
Mayumi Ito et al.
JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2020)
Jigging: A Review of Fundamentals and Future Directions
Weslei M. Ambros
MINERALS (2020)
Separation studies of concrete and brick from construction and demolition waste
Kui Hu et al.
WASTE MANAGEMENT (2019)
A physical separation scheme to improve ammonium thiosulfate leaching of gold by separation of base metals in crushed mobile phones
Sanghee Jeon et al.
MINERALS ENGINEERING (2019)
Sensor-Based Ore Sorting Technology in Mining-Past, Present and Future
Christopher Robben et al.
MINERALS (2019)
The impact of size segregation on packing density in jig beds: An X-ray tomographic study
L. C. Woollacott
MINERALS ENGINEERING (2019)
Some observations on the influence of particle size and size distribution on stratification in pneumatic jigs
Weslei M. Ambros et al.
POWDER TECHNOLOGY (2019)
Gold recovery from shredder light fraction of E-waste recycling plant by flotation-ammonium thiosulfate leaching
Sanghee Jeon et al.
WASTE MANAGEMENT (2018)
Improvement of jig efficiency by shape separation, and a novel method to estimate the separation efficiency of metal wires in crushed electronic wastes using bending behavior and entanglement factor
Theerayut Phengsaart et al.
MINERALS ENGINEERING (2018)
Recycling of wastes for value-added applications in concrete blocks: An overview
Yazi Meng et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Characterization and Use of Construction and Demolition Waste from South of Brazil in the Production of Foamed Concrete Blocks
Patricia Favaretto et al.
APPLIED SCIENCES-BASEL (2017)
Construction and demolition waste recycling plants revisited: management issues
Serdar Ulubeyli et al.
MODERN BUILDING MATERIALS, STRUCTURES AND TECHNIQUES (2017)
Investigations on the Detectability of Rare-Earth Minerals Using Dual-Energy X-ray Transmission Sorting
Kilian Neubert et al.
JOURNAL OF SUSTAINABLE METALLURGY (2017)
Stratification in air jigs of concrete/brick/gypsum particles
Carlos Hoffmann Sampaio et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
A sorting method to value recycled concrete
Regis Sebben Paranhos et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Bridging the gap: Understanding the economic impact of ore sorting on a mineral processing circuit
Joseph Lessard et al.
MINERALS ENGINEERING (2016)
Upgrading the quality of mixed recycled aggregates from construction and demolition waste by using near-infrared sorting technology
Inigo Vegas et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Applications of Sensor-Based Sorting for the Processing of Mineral Resources
Hermann Wotruba et al.
CHEMIE INGENIEUR TECHNIK (2014)
Recycled aggregate from C&D waste & its use in concrete - A breakthrough towards sustainability in construction sector: A review
Monalisa Behera et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production
R. V. Silva et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Experiences in Dry Coarse Coal Separation Using X-Ray-Transmission-Based Sorting
Christopher Robben et al.
INTERNATIONAL JOURNAL OF COAL PREPARATION AND UTILIZATION (2014)
Influence of mixed recycled aggregate on the physical - mechanical properties of recycled concrete
Cesar Medina et al.
JOURNAL OF CLEANER PRODUCTION (2014)
The potential of using air jigging to sort recycled aggregates
Bogdan Cazacliu et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Application of near-infrared spectroscopy to sensor based sorting of a porphyry copper ore
Marinus Dalm et al.
MINERALS ENGINEERING (2014)
Mass, energy and material balances of SRF production process. Part 2: SRF produced from construction and demolition waste
Muhammad Nasrullah et al.
WASTE MANAGEMENT (2014)
Viable Applications of Sensor-Based Sorting for the Processing of Mineral Resources
Henning Knapp et al.
CHEMBIOENG REVIEWS (2014)
Rheological and calorimetric behaviour of cements blended with containing ceramic sanitary ware and construction/demolition waste
C. Medina et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Physical-chemical and mineralogical characterization of fine aggregates from construction and demolition waste recycling plants
Fernando Rodrigues et al.
JOURNAL OF CLEANER PRODUCTION (2013)
A SWOT analysis of successful construction waste management
Hongping Yuan
JOURNAL OF CLEANER PRODUCTION (2013)
Economic viability analysis of a construction and demolition waste recycling plant in Portugal - part I: location, materials, technology and economic analysis
Andre Coelho et al.
JOURNAL OF CLEANER PRODUCTION (2013)
The evolution of construction waste sorting on-site
Hongping Yuan et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Concrete block production from construction and demolition waste in Tanzania
M. M. Sabai et al.
RESOURCES CONSERVATION AND RECYCLING (2013)
Best practice measures assessment for construction and demolition waste management in building constructions
Paola Villoria Saez et al.
RESOURCES CONSERVATION AND RECYCLING (2013)
Separability studies of construction and demolition waste recycled sand
Carina Ulsen et al.
WASTE MANAGEMENT (2013)
Environmental analysis of a construction and demolition waste recycling plant in Portugal - Part I: Energy consumption and CO2 emissions
Andre Coelho et al.
WASTE MANAGEMENT (2013)
Reduction of construction wastes by improving construction contract management: a multinational evaluation
Daylath Mendis et al.
WASTE MANAGEMENT & RESEARCH (2013)
Properties of partition wall blocks prepared with fresh concrete wastes
Shi-cong Kou et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Determination of construction and demolition recycled aggregates composition, in considering their heterogeneity
S. C. Angulo et al.
MATERIALS AND STRUCTURES (2009)
Characteristics of lightweight aggregates from primary and recycled raw materials
A. Mueller et al.
CONSTRUCTION AND BUILDING MATERIALS (2008)
Economic comparison of concrete recycling: A case study approach
Vivan W. Y. Tam
RESOURCES CONSERVATION AND RECYCLING (2008)
Recycled concrete aggregates
ND Oikonomou
CEMENT & CONCRETE COMPOSITES (2005)
Building materials from waste
K Weimann et al.
MATERIALS TRANSACTIONS (2003)
On-site sorting of construction and demolition waste in Hong Kong
CS Poon et al.
RESOURCES CONSERVATION AND RECYCLING (2001)