☆ 4.5 Article

Safety Analysis of Synergetic Operation of Backfilling the Open Pit Using Tailings and Excavating the Ore Deposit Underground

MINERALS (2021)

Related references

Note: Only part of the references are listed.

Article Engineering, Geological

A three-dimensional slope stability analysis method based on finite element method stress analysis

Zhenning Su et al.

Summary: A new three-dimensional slope stability analysis method is proposed based on the finite element method for stress calculation. The method can easily calculate both local and global safety factors of the slip surface and uses an improved ellipsoidal slip surface construction method and two-stage particle swarm optimization to search for the critical slip surface more accurately. The study reveals the influence of various factors on the calculation results and validates the effectiveness of the proposed method through numerical examples and comparison with the strength reduction method.

ENGINEERING GEOLOGY (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Experimental investigation of a strain gauge sensor based on Fiber Bragg Grating for diameter measurement

Victor H. R. Cardoso et al.

Summary: A strain gauge sensor based on Fiber Bragg Grating (FBG) for diameter measurement is proposed and experimentally demonstrated. The sensor is easily fabricated by inserting the FBG on a strain gauge using a 3D printer and fixing the FBG in two points of the structure. The sensor shows a sensitivity of 0.5361 nm/mm and a good linear response of 0.9976, indicating its potential for monitoring diameter variation in certain applications.

OPTICAL FIBER TECHNOLOGY (2021)

Add to Collection

Article Environmental Sciences

Reutilization of gangue wastes in underground backfilling mining: Overburden aquifer protection

Dan Ma et al.

Summary: Gangue backfilling mining (GBM) can effectively alleviate gangue pollution and protect overburden aquifers. The hydraulic properties and deformation behaviors of granular gangues were studied, showing that these properties vary with the original grain size grade and stress rate. An improved model based on fractal dimension was found to have better accuracy in predicting permeability evolution compared to the traditional Kruger model.

CHEMOSPHERE (2021)

Add to Collection

Article Energy & Fuels

Discharge and ignition characteristics from indentation fracture of coal mine roof

Yi Lu et al.

Summary: Electric effects are generated during the deformation and fracture of coal mine roof sandstones, which can potentially lead to gas explosions. The compressive strength of the rock plays a key role in the instantaneous discharge process.

FUEL (2021)

Add to Collection

Article Construction & Building Technology

Mechanical performance and failure criterion of coral concrete under combined compression-shear stresses

Bing Liu et al.

Summary: The mechanical performance of coral concrete under combined compression-shear stresses was investigated, and the shear failure modes, deformation proprieties, and shear strength components were analyzed. It was found that with the normal stress ratio increasing, the peak shear strength and corresponding shear displacement also increase. Five failure criterion models were proposed, with the one based on stress invariant achieving the highest prediction accuracy.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Immobilization and leaching characteristics of fluoride from phosphogypsum-based cemented paste backfill

Qiu-song Chen et al.

Summary: The study evaluated the feasibility of using cemented paste backfill for the remediation of phosphogypsum and examined fluorine immobilization mechanisms. Through physico-chemical analyses, it was discovered that calcium silicate hydrate gel is associated with fluorine retention. However, further modifications are needed for the simulation to be used as a predictive tool for phosphogypsum management options.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

Add to Collection

Review Green & Sustainable Science & Technology

The detoxification and utilization of cyanide tailings: A critical review

Kaiwei Dong et al.

Summary: Cyanide tailings are hazardous solid wastes generated from the gold mining industry, containing toxic cyanides and valuable elements. Efforts have been made to develop detoxification and utilization technologies, with thermal treatment and autoclaved hydrolysis showing promise for cyanide removal. Recovery of valuable elements from cyanide tailings faces challenges but can bring economic and environmental benefits.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Engineering, Multidisciplinary

Finite element analysis in fused deposition modeling research: A literature review

Sumit Paul

Summary: Fused Deposition Modelling (FDM) is a popular rapid prototyping technique where Finite Element (FE) methods are commonly used for initial analysis. However, the existing literature lacks realistic FE models for surface finish and geometrical analysis, highlighting the need for researchers to focus more on FE analysis for FDM fabricated parts.

MEASUREMENT (2021)

Add to Collection

Article Engineering, Geological

Effect of Cyclic Wetting-Drying Treatment on Strength and Failure Behavior of Two Quartz-Rich Sandstones Under Direct Shear

Xiaoshuang Li et al.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effects of temperatures and pH values on rheological properties of cemented paste backfill

Zhang Qin-li et al.

Summary: This study investigated the influence mechanisms associated with temperatures and pH values on cemented paste backfill (CPB) systems. The results showed that temperatures had significant effects on the rheological properties of CPB, while the effects of pH values were relatively unapparent. Higher temperatures and non-neutral pH conditions were found to increase shear stress and apparent viscosity in the CPB samples.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Approach to the management of gold ore tailings via its application in cement production

Qiang Wang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Geosciences, Multidisciplinary

Numerical study on movement of dynamic strata in combined open-pit and underground mining based on similar material simulation experiment

Junwen Zhang et al.

ARABIAN JOURNAL OF GEOSCIENCES (2020)

Add to Collection

Article Engineering, Geological

Discussion on the allowable safety factor of slope stability for high rockfill dams in China

Zhenyu Wu et al.

ENGINEERING GEOLOGY (2020)

Add to Collection

Article Engineering, Geological

Sensitivity analysis of drilling parameters in rock rotary drilling process based on orthogonal test method

Yanlong Li et al.

ENGINEERING GEOLOGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Optimization of open pit to underground transition depth: An idea for reducing waste rock contamination while maximizing economic benefits

Ali Soltani Khaboushan et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Mining & Mineral Processing

Physical model test study on shear strength characteristics of slope sliding surface in Nanfen open-pit mine

Zhigang Tao et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Engineering, Geological

Slope stability assessment of an open pit using lattice-spring-based synthetic rock mass (LS-SRM) modeling approach

Subash Bastola et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Elastoplastic coupling analysis of high-strength concrete based on tests and the Mohr-Coulomb criterion

Hongliang Tu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Experimental study of the short-term pressures of uncemented paste backfill with different solid contents for barricade design

Jian Zheng et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Strength and deformation behaviors of cemented tailings backfill under triaxial compression

Wen-bin Xu et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effects of curing under step-by-step load on mechanical and deformation properties of cemented gangue backfill column

Guo Yu-xia et al.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2020)

Add to Collection

Article Construction & Building Technology

Effect of polypropylene fiber content and fiber length on the saturated hydraulic conductivity of hydrating cemented paste backfill

Sirisha Chakilam et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Characterization and evaluation of the pozzolanic activity of granulated copper slag modified with CaO

Yan Feng et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Engineering, Geological

Bayesian estimation of the normal and shear stiffness for rock sockets in weak sedimentary rocks

Pouyan Asem et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)

Add to Collection

Review Engineering, Chemical

Cemented paste backfill for mineral tailings management: Review and future perspectives

Chongchong Qi et al.

MINERALS ENGINEERING (2019)

Add to Collection

Article Mining & Mineral Processing

Subsidence over room and pillar retreat mining in a low coal seam

Andre Zingano et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Mining & Mineral Processing

Quantitative hazard assessment system (Has-Q) for open pit mine slopes

Tatiana Barreto dos Santos et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Construction & Building Technology

Similar simulation experiment of expressway tunnel in karst

Qingyan Tian et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Green & Sustainable Science & Technology

A strength prediction model using artificial intelligence for recycling waste tailings as cemented paste backfill

Chongchong Qi et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Control of waste rock-tailings paste backfill for active mining subsidence areas

Wei Sun et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Thermodynamics

Optimization of tensile strength in TIG welding using the Taguchi method and analysis of variance (ANOVA)

A. Balaram Naik et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)

Add to Collection

Article Environmental Studies

A stochastic optimization method with in-pit waste and tailings disposal for open pit life-of-mine production planning

M. Adrien Rimele et al.

RESOURCES POLICY (2018)

Add to Collection

Article Management

Optimizing the open pit-to-underground mining transition

Barry King et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2017)

Add to Collection

Article Mining & Mineral Processing

3-D discontinuum numerical modeling of subsidence incorporating ore extraction and backfilling operations in an underground iron mine in China

Huang Gang et al.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Mechanics

Maximum mean principal stress criterion for three-dimensional brittle fracture

J. Wang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)

Add to Collection

Article Engineering, Mechanical

Study on well hard shut-in experiment based on similarity principle and erosion of ram rubber

Chuanjun Han et al.

ENGINEERING FAILURE ANALYSIS (2013)

Add to Collection

Article Statistics & Probability

Properties and applications of Fisher distribution on the rotation group

Tomonari Sei et al.

JOURNAL OF MULTIVARIATE ANALYSIS (2013)

Add to Collection

Proceedings Paper Engineering, Environmental

Research on protecting the safety of buildings by using backfill mining with solid

Pu Hai et al.

2011 INTERNATIONAL CONFERENCE OF ENVIRONMENTAL SCIENCE AND ENGINEERING, VOL 12, PT A (2012)

Add to Collection

Article Statistics & Probability

Discrepancy for uniform design of experiments with mixtures

Jian-Hui Ning et al.

JOURNAL OF STATISTICAL PLANNING AND INFERENCE (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Implications of the similarity principle relating creep and attenuation in finely grained solids

S. J. S. Morris et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)

Add to Collection

Article Engineering, Chemical

Integrated mine tailings management by combining environmental desulphurization and cemented paste backfill:: Application to mine Doyon, Quebec, Canada

Mostafa Benzaazoua et al.

MINERALS ENGINEERING (2008)

Add to Collection

Article Geography, Physical

Analysis of the distributions of stress in natural ridge forms:: implications for the deformation mechanisms of rock slopes and the formation of sackung

D Kinakin et al.

GEOMORPHOLOGY (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.