Related references
Note: Only part of the references are listed.Effect of dissolved oxygen, temperature, and pH on polarization behavior of carbon steel in simulated concrete pore solution
Xiahe Liu et al.
ELECTROCHIMICA ACTA (2021)
Effect of groove microstructure on slurry erosion in the liquid-solid two-phase flow
Z. X. Chen et al.
WEAR (2021)
Experimental Apparent Stern-Geary Coefficients for AZ31B Mg Alloy in Physiological Body Fluids for Accurate Corrosion Rate Determination
Federico R. Garcia-Galvan et al.
METALS (2021)
Effect of Thermal Treatment and Erosion Aggressiveness on Resistance of S235JR Steel to Cavitation and Slurry
Alicja K. Krella et al.
MATERIALS (2021)
Effect of pressure of pulsating water jet moving along stair trajectory on erosion depth, surface morphology and microhardness
Sergej Hloch et al.
WEAR (2020)
Importance of the surface and environmental conditions on the corrosion behavior of brass, steel and brass coated steel wires and brass coated steel cords
Alexandre Romaine et al.
CORROSION SCIENCE (2020)
The effects of microstructures and repassivation kinetics on the tribocorrosion resistance of ferrite and ferrite-martensite stainless steels
V Dalbert et al.
WEAR (2019)
Design of an elbow for integrated gravimetric, electrochemical and acoustic emission measurements in erosion-corrosion pipe flow environments
Joshua Owen et al.
WEAR (2019)
The mechanism of erosion-corrosion of API X65 steel under turbulent slurry flow: Effect of nominal flow velocity and oxygen content
Javiera Aguirre et al.
WEAR (2019)
Slurry erosion of steel - Review of tests, mechanisms and materials
Vahid Javaheri et al.
WEAR (2018)
A review on particulate slurry erosive wear of industrial materials: In context with pipeline transportation of mineral-slurry
Shobha Lata Sinha et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2017)
SLURRY EROSION - DESIGN OF TEST DEVICES
M. H. Buszko et al.
ADVANCES IN MATERIALS SCIENCE (2017)
Slurry Erosion of Pipeline Steel: Effect of Velocity and Microstructure
Tahrim Alam et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2016)
Use of Electrochemical Tests for Assessment of the Effect of Erosive Particle Size on the Erosion-Corrosion Behaviour of AISI 304L Austenitic Stainless Steel
Diana Maria Lopez et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2016)
Round impinging jets with relatively large stand-off distance
Mehrdad Shademan et al.
PHYSICS OF FLUIDS (2016)
Numerical simulation of solid particle erosion in pipe bends for liquid-solid flow
Wenshan Peng et al.
POWDER TECHNOLOGY (2016)
Wear performance of quenched wear resistant steels in abrasive slurry erosion
Niko Ojala et al.
WEAR (2016)
A Spheroid Model for the Role of Shape in Particle Size Analysis
Richard Hogg
KONA Powder and Particle Journal (2015)
On the applicability of the Stern-Geary relationship to determine instantaneous corrosion rates in macro-cell corrosion
U. Angst et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2015)
Effect of carbides on erosion resistance of 23-8-N steel
Aniruddha A. Gadhikar et al.
BULLETIN OF MATERIALS SCIENCE (2014)
Erosion-corrosion at different locations of X65 carbon steel elbow
L. Zeng et al.
CORROSION SCIENCE (2014)
Determination of the critical flow velocities for erosion-corrosion of passive materials under impingement by NaCl solution containing sand
Z. B. Zheng et al.
CORROSION SCIENCE (2014)
Effect of Particle Size and Liquid Viscosity on Erosion in Annular and Slug Flow
N. R. Kesana et al.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2014)
The effects of dilute polymer solution elasticity and viscosity on abrasive slurry jet micro-machining of glass
K. Kowsari et al.
WEAR (2014)
Effect of impact angle and velocity on erosion of API X42 pipeline steel under high abrasive feed rate
Md. Aminul Islam et al.
WEAR (2014)
Bioorganic compounds as copper corrosion inhibitors in hydrocarbon media
Martina Levin et al.
CORROSION SCIENCE (2012)
Electrochemical investigation of erosion-corrosion using a slurry pot erosion tester
S. S. Rajahram et al.
TRIBOLOGY INTERNATIONAL (2011)
Flow Dynamic Simulation of Micro Abrasive Water Jet
Jingming Fan et al.
APPLICATION OF DIAMOND AND RELATED MATERIALS (2011)
Erosive wear by silica sand on AISI H13 and 4140 steels
E. Rodriguez et al.
WEAR (2009)
Particle size effects on the slurry erosion of aluminium alloy (AA 6063)
Girish R. Desale et al.
WEAR (2009)
Determination of the Tafel slope for oxygen evolution on boron-doped diamond electrodes
Agnieszka Kapalka et al.
ELECTROCHEMISTRY COMMUNICATIONS (2008)
Comparison of computed and measured particle velocities and erosion in water and air flows
Y. Zhang et al.
WEAR (2007)
Effect of impingement angle on slurry erosion behaviour and mechanisms of 1017 steel and high-chromium white cast iron
M. A. Al-Bukhaiti et al.
WEAR (2007)
Erosion-corrosion interactions and their effect on marine and offshore materials
Robert J. K. Wood
WEAR (2006)
Effect of erodent properties on erosion wear of ductile type materials
Girish R. Desale et al.
WEAR (2006)
Investigation of the effect of impingement angle on tribocorrosion using single impacts
Andrew Jonathan Smith et al.
ELECTROCHIMICA ACTA (2006)
Wear and corrosion wear of medium carbon steel and 304 stainless steel
MR Bateni et al.
WEAR (2006)
Numerical investigation of erosion threshold velocity in a pipe with sudden contraction
HM Badr et al.
COMPUTERS & FLUIDS (2005)
Effect of the material surface hardness on the erosion of AISI316
M Divakar et al.
WEAR (2005)
Comparison of predicted and experimental erosion estimates in slurry ducts
RJK Wood et al.
WEAR (2004)
Investigation of three dimensional interstitial velocity, solids motion, and orientation in solid-liquid flow using particle tracking velocimetry
KB Zitoun et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2001)
Simulation of erosion by the dilute particulate flow impact
YY Niu et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2000)